- PLC with HMI and I/O
- Software & Communication
- J1939 – license for Horner PLC HMI controllers XL4, XLW, XL6 Prime
J1939 – license for Horner PLC HMI controllers XL4, XLW, XL6 Prime
Perpetual SAE J1939 licence for 1 supported HORNER controller. Receive and transmit messages over CAN according to the project. Before ordering, we will verify the panel, firmware and data list of the connected device.
MoreCode: HE-VFJ1-01
Perpetual SAE J1939 licence for 1 supported HORNER controller. Receive and transmit messages over CAN according to the project. Before ordering, we will verify the panel, firmware and data list of the connected device.
MoreCode: HE-VFJ1-01
Display and process J1939 protocol device data.
The SAE J1939 licence allows a supported HORNER controller to communicate with devices using this protocol on the CAN bus. The messages can provide a local view of an engine, power unit or compatible sensor. Prepare the display and associated logic in Cscape.
Optional extensions for example for XL4 Prime, XL6 Prime and XLW Prime. XL7 Prime, XL10 Prime, XL10W Prime, XL15 Prime, CANVAS and CPU300 have J1939 by default.

Send the model of the panel and the description of the desired function.
We will check whether the function is already part of the device, what license you need and what will need to be set.
Setting up the J1939 protocol
Configuration of receiving and transmitting J1939 messages in Cscape.
Use of SAE J1939
Engine overview
On the panel you will see the revolutions, temperatures or other data that the specific engine control unit provides via J1939.
Monitoring a power unit
You will use the selected operating values and states for the operator screen and subsequent logic.
J1939 sensor connection
You plug the data of a compatible sensor or encoder into the HORNER application. An example with an encoder is shown in the video below.
Your own equipment with J1939
You prepare the reception and authorized transmission of messages according to the device protocol and project requirements.
License selection and compatibility
The license makes sense for devices that actually use SAE J1939. Please verify the exact HORNER model, feature availability and connected device message list first.
| Order code | HE-VFJ1-01 |
|---|---|
| License unit | 1 license for 1 controller HORNER; permanent activation by voucher. |
| XL4 Prime, X5 Prime, XL6 Prime and XLW Prime | J1939 is an optional paid license. |
| XL7 Prime, XL10 Prime, XL10W Prime and XL15 Prime | J1939 is included by default. |
| CANVAS and CPU300 | J1939 is included by default. |
| Other supported models | For older XL, selected RCC, Micro and CPU we will verify full code, firmware and activation option. |
| Standard Cscape | Free. This item is a separately paid feature extension. |
| Price and work of technicians | The current price of the license is in the menu above. We will price configuration, training and the project according to the agreed scope. |
Selection of messages and operating values
PGN - data groups
In the project, you specify the messages that the panel should receive or transmit. The list is based on the connected device's documentation.
Meaning and conversion of values
For each required data, you verify the location, data format, scale and unit.
Data loss behavior
You set up communication monitoring and program response if expected data stops arriving.
First test J1939
When changing the firmware, applications, screens, configurations and operational data may be deleted. Back up the project and data in advance and choose the right procedure for your model.
- Prepare the HORNER code, firmware and message documentation of the connected device.
- Verify license, communication speed and required firmware variant.
- In Cscape, set addressing and reception of selected PGNs. First, verify a few known values.
- If transmission is required, enable it according to the device documentation and test the resulting system behaviour.
License content and project documents
| Part of this item | SAE Perpetual License J1939 for one supported controller. |
|---|---|
| Separately | Panel, cabling, network termination CAN and connected equipment. |
| Necessary documents | List of PGN and data parameters, addresses, communication speed and description of required function. |
| Our help | License verification, mapping design, project consultation and configuration as agreed. |
Training and support for the first project
Training in Liberec
We train individuals and groups in our training room in Liberec. We will agree on the scope and date according to the experience of the participants and their tasks.
Self-study
The original Horner Automation Europe video instructions are used for self-study. Translated titles and annotations explain their content, videos remain in English. Video Tutorials Horner Europe.
We offer training in Liberec for individuals and groups. We will agree on the scope and price according to the project; you can also start with a self-study from the manufacturer's videos below.
Encoder connection via J1939
Practical example of connecting the J1939 device to the HORNER control system.
Original material HORNER
Click to open the original manufacturer's material in a larger view.
Frequently asked questions
Will the panel read all data from each engine?
This depends on the messages and parameters provided by the specific engine control unit. Send its documentation; we will verify support and the required mapping in advance.
Do I need a license for XL7 Prime or CANVAS?
These series have J1939 by default. We'll check your existing support and settings so you don't buy an unnecessary license.
Can I use CANopen instead of J1939?
Both the counterparty and HORNER must use the same protocol. The common physical bus CAN does not imply interchangeability of CANopen and J1939.
Can changing the firmware affect the project?
Changing the firmware can erase the application, screens, configuration and data. Prepare backups and verify the procedure for the exact model before intervention.
Is standard Cscape paid?
The Cscape standard programming software is free. You buy a license that expands a specific function of the supported device, or you order our help with the project separately.
Can you help with the activation and the first project?
Yes. We will verify the model and license, advise on settings and offer training in Liberec. According to the agreement, we will also design the project and ensure assembly with our own technicians. We will confirm the scope and price of the services in the offer.
Why buy from FOXON
Distributor HORNER
We are a distributor of HORNER. We deliver new licenses and devices with warranty, advise on selection and provide technical support.
Selection according to your project
We will discuss technology function, signals and communication. We will compare the entry with the HORNER options and select a suitable product.
Technical support and training
We advise on the use of the equipment and train individuals and groups. For self-study, we recommend the manufacturer's instructions.
Solution design and assembly
If necessary, we will design a solution, prepare a project and install the equipment with our own technicians. We will agree on the scope of work according to the technology.
License for your specific project
Send panel order code, firmware version and Cscape and brief job description. We will verify the necessary license and propose a range of configuration assistance.
Documentation and first steps
Start with the compatibility overview and then open the manual for the selected feature. Documents and videos are original HORNER materials in English. Use the older manuals according to the version of your device.
Compatibility and software
When a license is needed
Current table of functions in the price of the panel and optional licenses for individual series.
Open the materialFree Cscape
Programming environment for PLC and HMI. The paid license on this page is a separate feature extension.
Open the materialFirmware by model
Verify exact model and feature requirements before changing. Back up the project and operational data first.
Open the materialSAE configuration J1939
J1939 - PGN reception and transmission
Configuration of messages, reception modes and data areas. Verify the range of options for your specific device and firmware.
Open the materialFirmware and conditions of change to J1939
The manufacturer warns about erasing the application, screens, configuration and data. Make backups first and verify the exact procedure.
Open the materialTechnical features and license conditions
The HE-VFJ1-01 license extends the functionality of the supported HORNER device. It depends on the exact model, its equipment and the corresponding firmware.
License and Activation
| Order code | HE-VFJ1-01 |
|---|---|
| License unit | 1 license for 1 controller HORNER; permanent activation by voucher. |
| Software | Free Cscape and firmware supporting the function. |
| Delivery | License / activation voucher. Panel, cables, power supply or technician labor are not included in this item. |
Protocol and project configuration
| Protocol | SAE J1939 over CAN. |
|---|---|
| Data transfer | Configured reception and transmission of PGN messages. |
| Settings | Cscape; addressing, PGN and binding of received or transmitted data to the program. |
| Documentation for the connected device | Documentation of messages and parameters including format, scale and units. |
| Optional at Prime | XL4 Prime, X5 Prime, XL6 Prime and XLW Prime. |
| Standard for Prime | XL7 Prime, XL10 Prime, XL10W Prime and XL15 Prime. |
| Other series with standard support | CANVAS and CPU300. |
| Firmware and CAN port | According to the model; before changing, verify the existing protocol and back up the project and operational data. |

VIDEO: Tips and tricks for setting up HORNER PLCs with display, inputs and outputs
HORNER PLCs combine machine control, operator display and inputs/outputs in one device. If you need a compact solution for a smaller machine, part of a production line, a test station or modernization of older equipment, you do not have to source and combine a separate PLC, HMI panel and I/O modules.
The manufacturer’s training videos show how to connect the panel, work in Cscape, set up communication, use WebMI and work with basic inputs and outputs. They are especially useful during initial commissioning, so you do not have to figure everything out by trial and error.

Review: Horner Canvas Series PLC with Integrated HMI – Part 1: PLC
Horner PLCs with integrated HMI are new not only to our e-shop, but also to our market. We asked respected industrial automation specialist Jaroslav Blažek (blaja.cz) to explore all the functions and user-friendliness of these devices. You can find out whether he was satisfied and what it was like working with the Horner units in his review.

Review: Cscape Software for Horner PLCs with Integrated HMI
For efficient work with Horner panels (PLCs with integrated HMI), you need a reliable and intuitive programming tool. The Cscape software allows configuration of both the PLC and the integrated HMI within a single environment—and it’s free. Once again, we asked specialist Jaroslav Blažek (blaja.cz) to take a closer look at the software. You can find out how the installation and registration went in his review.

Review: Horner Canvas Series PLC with Integrated HMI – Part 2: HMI and Remote Monitoring
Horner PLCs with integrated HMI have not been part of our product range for long, but they are already attracting well-deserved attention. We asked industrial automation expert Jaroslav Blažek (blaja.cz) to take a closer look at them — especially in terms of functionality, intuitive operation, and practical deployment options. Find out how these Horner devices performed and what he has to say about them in the following review.

Review: How CANbus OCS-I/O Peripherals Work with the Horner Canvas 4 PLC/HMI
External I/O peripherals can be connected to Horner PLCs with HMI—and are often required. Learn how Jaroslav Blažek (blaja.cz) tested connecting an OCS-I/O module with digital and analog inputs/outputs to a Canvas 4 PLC/HMI via the CANbus.

New on the Market: Touchscreen PLC with Integrated HMI and I/Os from Horner Automation
Are you looking for a compact, powerful and easy-to-integrate solution for machine control or upgrading existing technology? We are pleased to introduce a new addition to our product range: panels from Horner Automation. Their PLCs, which feature an integrated HMI with a touchscreen display and inputs/outputs, are ideal for designers of new machines as well as engineers looking to innovate their companies' production.

Case Study: How the Horner X7 Control Panel Automated Weighing and Dosing
A new fully automated dosing and weighing machine is controlled by a Horner X7 PLC with integrated HMI and I/Os. In this setup, the industrial panel manages recipes, temperature control, and precise weighing of ingredients. At the same time, it collects batch data, eliminates human errors, and ensures consistent food quality. What does it look like in practice?
Highlighted items are mandatory.

