Industrial servo, encoder and data cables
We supply compatible servo, encoder, power, brake, hybrid and data cables for industrial drives and automation. We identify the correct cable from the original part number or the designation of the servomotor or drive. We offer standard stock lengths as well as custom manufacturing with the required connectors, shielding and design for fixed or moving applications.
Do you have the cable part number, motor designation or photos of the connectors?
We will verify a compatible replacement, the correct wiring, required length, connector types, mechanical design and suitability for fixed or moving installation.
More about cable types, manufacturers and custom production
Cables for machine repairs, retrofits and new projects
The correct industrial cable must match not only the connectors and length, but also the pin assignment, electrical parameters, shielding and mechanical load. We therefore usually identify a cable from the original part number or the exact designation of the motor, encoder, inverter or servo drive.
What type of industrial cable are you looking for?
Power cables for servomotors and motors, with or without brake conductors.
Transmission of position, speed and other data from absolute and incremental encoders.
Cables between the resolver, servomotor and drive-control electronics.
DRIVE-CLiQ, Industrial Ethernet, bus, control and other signal cables.
Separate cables for supplying and controlling the brake of a servomotor or motor.
Power, data, brake and other signals are combined in one cable.
Cables for panels, I/O, fans, control cabinets and other parts of industrial equipment.
Mechanically robust designs for repeated movement, bending and industrial loads.
Choose cables by equipment manufacturer
Cables for servomotors, SINAMICS, SIMOTICS, DRIVE-CLiQ, encoders and resolvers.
Cables for SIEMENSPower, brake, feedback, I/O, panel and control-cabinet cables.
Cables for FANUCCables for ACOPOS, ACOPOSmulti, ACOPOS P3, X20, X67 and POWERLINK.
Cables for B&RServo, motor, encoder and other cables for Rexroth Indramat drives.
Cables for Bosch RexrothCables for Allen-Bradley, Kinetix, MP, TL and HPK series and hybrid motor solutions.
Cables for RockwellCompatible cables for KEB servo drives, motors and other systems.
Cables for KEBCables for CMP and CM servomotors, Hiperface encoders, resolvers and MOVIGEAR.
Cables for SEW-EurodriveCables for Schneider servo drives, motors and automation systems.
Cables for SchneiderCompatible cables for Yaskawa servomotors, encoders and drives.
Cables for YaskawaWhat should you send us so that we can identify the correct cable?
- Part number of the original cable.
- Manufacturer and exact designation of the servomotor or motor.
- Type of inverter, servo drive, encoder or resolver.
- Required cable length.
- Photos of both connectors and their markings.
- Information on whether the cable is installed permanently or moves.
- Requirement for straight or angled connectors.
- Quantity and expected repeat demand.
What can be customised on a made-to-order cable?
Standard stock length or an exact length to suit the machine and cable route.
Straight, angled, shielded, screw-lock or other special designs.
Design for a control cabinet, machine or repeated movement in a drag chain.
Cable selection according to interference, oils, mechanical load and industrial operating conditions.
Original cable, compatible replacement or custom manufacturing?
| Option | Main advantage | Typical use | Availability of lengths and connectors |
|---|---|---|---|
| Original cable | Original part from the equipment manufacturer | Applications requiring an exclusively original design | According to the manufacturer's range and availability |
| Compatible replacement | More favourable price and shorter delivery time | Repairs, maintenance and standard replacements | Standard stock and made-to-order versions |
| Custom cable | Exact length and design | Retrofits, special applications and machine builders | Length, connectors and mechanical design according to specification |
Typical applications
Replacement of a damaged servo, feedback or power cable.
Adapting the cabling to a new motor, inverter, servo drive or encoder.
Repeat cable deliveries for machine builders and series applications.
A solution for older equipment for which the manufacturer no longer supplies the cable.
Send us the part number of the original cable. When the label is missing or illegible, send the motor and drive designations, photos of both connectors and the required length. Based on this information, we will check an available replacement or the possibility of custom manufacturing.
Why choose industrial cables from FOXON?
- Help finding a cable by its part number.
- Compatible alternatives for several drive manufacturers.
- Standard lengths and custom cable manufacturing.
- Supply from single units to repeat production batches.
- Special and angled connectors available.
- Designs for fixed and moving applications.
- Technical consultation for machine repair or modernisation.
- Support for maintenance teams and industrial equipment manufacturers.
Recommended4
Replacement for cable 6FX8002-2CA31-1AG0, length 6 m
106,48 EUR incl. VAT
Replacement for cable 6FX8002-2CA31-1BA0, length 10 m
128,26 EUR incl. VAT
Replacement for cable 6FX5002-2DC10-1BA0, length 10 m
99,22 EUR incl. VAT
Replacement for cable 6FX5002-2DC10-1CA0, length 20 m
123,42 EUR incl. VAT
Are you looking for servomotor cables? Do you need a custom length of PROFINET cables and special connectors?
Do you buy power, signal and communication industrial cables? Do you pay a lot for them? Do you need special lengths or different connector designs? We offer replacements for well-known cable brands that we manufacture for you in Italy. We have attractively priced cable replacements for Siemens and FANUC servo motors and more. Find out what other benefits this brings to our customers.
Question or Inquiry
Highlighted items are mandatory.