7013-16GT-I - VOLKTEK industrial Gigabit switch, 16× RJ45
- Switches and Wi-Fi
- Unmanaged switch
- 7013-16GT-I - VOLKTEK industrial Gigabit switch, 16× RJ45
7013-16GT-I - VOLKTEK industrial Gigabit switch, 16× RJ45
Sixteen Gigabit ports.
No configuration required.
Unmanaged industrial switch for connecting PLCs, HMIs, industrial computers and other Ethernet devices. It offers 16 RJ45 ports at 10/100/1000 Mbit/s and 12-48 V DC power in a metal housing for DIN rail mounting.
Gigabit transmission and PROFINET priority.
All 16 ports support speeds up to 1,000 Mbit/s. iQoS prioritises PROFINET traffic and 802.1p Tag QoS processes frames according to their priority.

We’ll select a switch for your industrial network
We can help you choose the right model and power supply. We will confirm the price, current stock availability and delivery date.
Ethernet for machines and control cabinets
7013-16GT-I expands the network with 16 copper ports. Each port automatically negotiates the speed of the connected device, and Auto MDI/MDI-X eliminates the need for a crossover Ethernet cable.
Automation integration
You can consolidate PLCs, operator panels, industrial computers and peripheral devices into a single control cabinet without the need for network management configuration.
New installations and network expansions
Use Gigabit ports to expand a network with more devices. You can also connect older devices operating at 10 or 100 Mbit/s.
For a simple, unmanaged network. If you require VLAN configuration, remote monitoring or managed network path redundancy, please select the appropriate managed model.
Technical specifications
| Order reference | VOLKTEK 7013-16GT-I |
|---|---|
| Model | Industrial unmanaged Ethernet switch |
| Copper ports | 16× 10/100/1000BASE-T, RJ45 connector |
| Automatic adaptation | Auto-negotiation and Auto MDI/MDI-X on all ports |
| Switching capacity | 32 Gbit/s |
| MAC address table | 8K entries |
| Packet forwarding rate | 23.8 million packets/s (L2) |
| Jumbo frames | 10 Kbytes |
| Traffic control | IEEE 802.3x Flow Control; VLAN Passthru; IEEE 802.1p Tag QoS; iQoS for PROFINET priority |
| QoS queues | 8 hardware queues; support for priority-tagged frames with VID=0 |
| Power supply | One 12-48 V DC power input |
| Power connection | 2-pole terminal block |
| Power consumption | 15 W |
| Signalling | PWR, 1000 and LNK/ACT |
| Housing and installation | IP40 metal housing; DIN rail mounting |
| Operating temperature | -40 to +75 °C |
| Storage temperature | -40 to +85 °C |
| Relative humidity | 5-95 %, non-condensing |
| Installation requirements | In a control cabinet; altitude up to 2,000 m; at least 50 mm clearance at the sides for ventilation; at least 50 mm between two switches |
| Dimensions (width × height × depth) | 50 × 160 × 120 mm |
| Weight with RJ45 caps | 900 g |
| Weight without RJ45 caps | 880 g |
| Ethernet standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x, IEEE 802.1p |
| EMC and mechanical tests | EN 55032; EN 61000-4-2/-3/-4/-5/-6; shock IEC 60068-2-27, drop IEC 60068-2-31, vibration IEC 60068-2-6 |
Data transmission and power supply
Smoother transmission
Flow Control helps reduce losses when the receiving device is overloaded. VLAN Passthru preserves VLAN tags in transmitted frames.
Priority for important communications
iQoS prioritises PROFINET traffic. IEEE 802.1p Tag QoS uses the priority of tagged frames and eight hardware queues to process communications.
Power supply in the control cabinet
Connect one 12-48 V DC supply to the 2-pole terminal block. When designing the power circuit, allow for 15 W switch consumption and the control cabinet operating conditions.
IP40 metal housing
The housing and industrial design are complemented by tests for resistance to electromagnetic interference, shock, vibration and drops. Provide earthing and sufficient clearance for ventilation.
Interfaces and installation
Ethernet ports and status LEDs are located on the front. The power terminal block and earth screw are on the top. The rear bracket is for DIN rail mounting.




Installation in a control cabinet. IP40 does not provide protection against water. Use a suitable SELV power supply, provide earthing and route power and data cables separately. For Ethernet, use Category 5e or higher cabling. Leave at least 50 mm at the sides for ventilation and maintain the same spacing between two switches.
Contents of the package
- 1× VOLKTEK 7013-16GT-I industrial switch
- 1× DIN rail mounting kit
- 1× brief installation guide
The power supply is ordered separately. We will help select a supply based on the 12-48 V DC range, switch power consumption and control cabinet environment.
Documents to download
Original manufacturer’s documentation in English. Both files can also be found in the ‘Downloads’ tab.
VOLKTEK videos
Official manufacturer videos in English present the equipment and the use of industrial switches.
VOLKTEK’s industrial portfolio - Overview of the manufacturer's products. Features vary by model.
The basics of Ethernet switches
Ethernet Switch 1 2 3
An introduction to how Ethernet switches work and how to choose them.
Unmanaged switch ranges
Basic and Premium unmanaged switches
General overview of VOLKTEK ranges. Specifications for the specific model are listed in the technical table.
Frequently Asked Questions
Does the switch require an IP address or configuration software?
No. 7013-16GT-I operates without software configuration or a management IP address. Once power and Ethernet cables are connected, it automatically negotiates each link speed.
What speeds do the individual ports support?
All 16 RJ45 ports support 10, 100 and 1,000 Mbit/s. Each port automatically selects the speed of the connected device.
Does it support VLANs?
It forwards VLAN-tagged frames unchanged using VLAN Passthru. To create VLANs, configure port membership and implement controlled network segmentation, select a managed switch.
What power supply do I need?
The switch has one 12-48 V DC input on a 2-pole terminal block and consumes 15 W. The power supply is ordered separately. Use a separate backed-up power supply to maintain operation during a mains failure.
Does it power connected devices via PoE?
No. 7013-16GT-I transmits data through 16 RJ45 ports. To power end devices over Ethernet, select an industrial PoE switch.
What’s included in the pack, and can you help me choose accessories?
The package contains one 7013-16GT-I switch, a DIN rail mounting kit and a quick installation guide. We can help you choose a suitable power supply and Ethernet cabling and verify the wiring for your network.
Why buy from FOXON?
We are a VOLKTEK distributor. We supply new, genuine products and assist with their selection and use in industrial networks.
New products with a warranty
We supply the 7013-16GT-I as a new, genuine VOLKTEK switch with a warranty and manufacturer documentation.
Technical support
We can advise you on selecting a switch, power supply and accessories. We will discuss the wiring and requirements of your application.
Stock availability and delivery
We will check current stock availability and confirm the price and estimated delivery date before you place your order.
Pre-purchase consultation
We can help you choose a model based on the number of devices, data transfer speed, power supply and operating conditions. We will check whether an unmanaged switch is sufficient for your network.
Delivery of the 7013-16GT-I switch
A new, original VOLKTEK product. This offer is for the 16-port model 7013-16GT-I, with 10/100/1000 Mbit/s speeds and 12-48 V DC power. We will confirm price, current stock availability and accessories upon enquiry.
Industrial networking consultancy
Please describe the connected devices, the number of ports required and the desired communication speed. We will discuss power supply, the control cabinet environment and network management requirements. We will help you select a suitable VOLKTEK switch and the necessary accessories.
Enquiry for 7013-16GT-I
Please send us the required quantity, the connected devices, the power supply in the control cabinet and the required delivery date. We will prepare a quotation for the new switch and assist you in selecting the appropriate accessories.
We’ll select a switch for your industrial network
We can help you choose the right model and power supply. We will confirm the price, current stock availability and delivery date.
Technical specifications of the 7013-16GT-I
| Order reference | VOLKTEK 7013-16GT-I |
|---|---|
| Model | Industrial unmanaged Ethernet switch |
| Copper ports | 16× 10/100/1000BASE-T, RJ45 connector |
| Automatic adaptation | Auto-negotiation and Auto MDI/MDI-X on all ports |
| Switching capacity | 32 Gbit/s |
| MAC address table | 8K entries |
| Packet forwarding rate | 23.8 million packets/s (L2) |
| Jumbo frames | 10 Kbytes |
| Traffic control | IEEE 802.3x Flow Control; VLAN Passthru; IEEE 802.1p Tag QoS; iQoS for PROFINET priority |
| QoS queues | 8 hardware queues; support for priority-tagged frames with VID=0 |
| Power supply | One 12-48 V DC power input |
| Power connection | 2-pole terminal block |
| Power consumption | 15 W |
| Signalling | PWR, 1000 and LNK/ACT |
| Housing and installation | IP40 metal housing; DIN rail mounting |
| Operating temperature | -40 to +75 °C |
| Storage temperature | -40 to +85 °C |
| Relative humidity | 5-95 %, non-condensing |
| Installation requirements | In a control cabinet; altitude up to 2,000 m; at least 50 mm clearance at the sides for ventilation; at least 50 mm between two switches |
| Dimensions (width × height × depth) | 50 × 160 × 120 mm |
| Weight with RJ45 caps | 900 g |
| Weight without RJ45 caps | 880 g |
| Ethernet standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x, IEEE 802.1p |
| EMC and mechanical tests | EN 55032; EN 61000-4-2/-3/-4/-5/-6; shock IEC 60068-2-27, drop IEC 60068-2-31, vibration IEC 60068-2-6 |

Frequently asked questions about the 7013-16GT-I
Does the switch require an IP address or configuration software?
No. 7013-16GT-I operates without software configuration or a management IP address. Once power and Ethernet cables are connected, it automatically negotiates each link speed.
What speeds do the individual ports support?
All 16 RJ45 ports support 10, 100 and 1,000 Mbit/s. Each port automatically selects the speed of the connected device.
Does it support VLANs?
It forwards VLAN-tagged frames unchanged using VLAN Passthru. To create VLANs, configure port membership and implement controlled network segmentation, select a managed switch.
What power supply do I need?
The switch has one 12-48 V DC input on a 2-pole terminal block and consumes 15 W. The power supply is ordered separately. Use a separate backed-up power supply to maintain operation during a mains failure.
Does it power connected devices via PoE?
No. 7013-16GT-I transmits data through 16 RJ45 ports. To power end devices over Ethernet, select an industrial PoE switch.
What’s included in the pack, and can you help me choose accessories?
The package contains one 7013-16GT-I switch, a DIN rail mounting kit and a quick installation guide. We can help you choose a suitable power supply and Ethernet cabling and verify the wiring for your network.