Converter PROFINET Slave / J1939 - HD67610-A1
Converter PROFINET Slave / J1939 - HD67610-A1
The ADFweb HD67610-A1 connects a J1939 bus to a PROFINET control system. It maps selected J1939 messages to PROFINET process data and also supports transfer in the opposite direction. More
Code: HD67610-A1
The ADFweb HD67610-A1 connects a J1939 bus to a PROFINET control system. It maps selected J1939 messages to PROFINET process data and also supports transfer in the opposite direction. More
Code: HD67610-A1
ADFweb HD67610-A1
PROFINET Slave / J1939
The ADFweb HD67610-A1 connects a J1939 bus to a PROFINET control system. It maps selected J1939 messages to PROFINET process data and also supports transfer in the opposite direction.
We will check your selection and prepare a quotation
Send us the device models, required connection and quantity.
Converter applications
Use it to integrate data from J1939 devices into PROFINET automation. Up to 1,439 bytes are available for reading and 1,439 bytes for writing; the required messages and their meaning must be known.
Technical specifications HD67610-A1
| Order code | HD67610-A1 |
|---|---|
| Protocol connection | PROFINET Slave / J1939 |
| Converter roles | PROFINET Slave; J1939 message reception and transmission |
| Interfaces and ports | 2× PROFINET RJ45; 1× J1939 CAN |
| Data capacity | 1439 bytes in each direction |
| Power supply | 8-24 V AC / 12-35 V DC |
| Power consumption at 24 V DC | 3.5 W |
| Operating temperature | -40 °C to +85 °C |
| Mounting | 35 mm DIN rail |
| Dimensions of the version shown (D × W × H) | 123 × 22.5 × 90.7 mm |
| Device weight | approximately 200 g |
| Configuration software | SW67610 |
For an older device, check the hardware version and connections against its label.
Communication and configuration
In SW67610, configure PROFINET, the J1939 parameters and messages for reception and transmission. The data map must match the required device values and PROFINET Controller project.
A1 is the DIN rail version with RJ45 connectors and a CAN terminal block. IP67 and IP69K ratings apply to other variants and must not be assumed for this code.
Supply and accessories
Please provide the complete order code. If you need a power supply, connection cables or help with configuration, include them in your enquiry. We will confirm the scope of supply and required accessories for your installation in the quotation.
Documentation and software
Diagrams and hardware version
The images help identify the hardware version. When replacing an older unit, compare its label, connectors and dimensions; we will confirm the version to be supplied in the quotation.
Frequently asked questions
Is knowing the two protocols enough?
The device roles, physical interfaces and data to be transferred must also be checked. A1 is the DIN rail version with RJ45 connectors and a CAN terminal block. IP67 and IP69K ratings apply to other variants and must not be assumed for this code.
How is this converter configured?
In SW67610, configure PROFINET, the J1939 parameters and messages for reception and transmission. The data map must match the required device values and PROFINET Controller project.
What information should I send to check the selection?
Send the exact device models at both ends, the protocols and communication roles, the number of devices and the required values. For a PLC, include the firmware and method of accessing its data.
FOXON support with selection and ordering
Selection based on your devices
We will review the specific connection, communication roles and required data.
Availability check
Before you place an order, we will confirm current availability and the possible delivery date.
Documentation for the exact order code
We select the documentation and configuration tool using the complete order code.
Accessories for your installation
We will include the requested accessories in the quotation to suit the connection arrangement.
Choosing the correct version
Two devices with the same protocols can have different functions. Check the gateway role on each side, the connectors and the complete order code.
A1 is the DIN rail version with RJ45 connectors and a CAN terminal block. IP67 and IP69K ratings apply to other variants and must not be assumed for this code.
Converter enquiry HD67610-A1
Provide the order code, quantity and the devices you need to connect. We will check the suitable version and prepare a quotation.
Request the converterTechnical specifications HD67610-A1
| Order code | HD67610-A1 |
|---|---|
| Protocol connection | PROFINET Slave / J1939 |
| Converter roles | PROFINET Slave; J1939 message reception and transmission |
| Interfaces and ports | 2× PROFINET RJ45; 1× J1939 CAN |
| Data capacity | 1439 bytes in each direction |
| Power supply | 8-24 V AC / 12-35 V DC |
| Power consumption at 24 V DC | 3.5 W |
| Operating temperature | -40 °C to +85 °C |
| Mounting | 35 mm DIN rail |
| Dimensions of the version shown (D × W × H) | 123 × 22.5 × 90.7 mm |
| Device weight | approximately 200 g |
| Configuration software | SW67610 |
For an older device, check the hardware version and connections against its label.