Converter PROFINET Slave / EtherNet/IP Slave - HD67660-A1
Converter PROFINET Slave / EtherNet/IP Slave - HD67660-A1
The ADFweb HD67660-A1 connects PROFINET and EtherNet/IP control systems. It operates as a Slave on both sides and transfers configured data between two controllers. More
Code: HD67660-A1
The ADFweb HD67660-A1 connects PROFINET and EtherNet/IP control systems. It operates as a Slave on both sides and transfers configured data between two controllers. More
Code: HD67660-A1
ADFweb HD67660-A1
PROFINET Slave / EtherNet/IP Slave
The ADFweb HD67660-A1 connects PROFINET and EtherNet/IP control systems. It operates as a Slave on both sides and transfers configured data between two controllers.
We will check your selection and prepare a quotation
Send us the device models, required connection and quantity.
Converter applications
Use it to exchange data between a PROFINET Controller and an EtherNet/IP Scanner. The EtherNet/IP side supports up to 496 bytes for reading and 496 bytes for writing.
Technical specifications HD67660-A1
| Order code | HD67660-A1 |
|---|---|
| Protocol connection | PROFINET Slave / EtherNet/IP Slave |
| Converter roles | PROFINET Slave; EtherNet/IP Slave |
| Interfaces and ports | 2× Ethernet RJ45 |
| Data capacity | 496 bytes in each direction |
| Power supply | 8-24 V AC / 12-35 V DC |
| Power consumption at 24 V DC | 4 W |
| Operating temperature | -40 °C to +85 °C |
| Mounting | 35 mm DIN rail |
| Dimensions of the version shown (D × W × H) | 123 × 22.5 × 90.7 mm |
| Device weight | approximately 200 g |
| Configuration software | SW67660 |
For an older device, check the hardware version and connections against its label.
Communication and configuration
In Compositor SW67660, configure the PROFINET and EtherNet/IP network parameters and data lengths. Define the corresponding data areas and their meaning in both controller projects.
The gateway does not act as a controller on either side. Do not select it to control EtherNet/IP Adapter or PROFINET Device equipment without the corresponding Controller or Scanner.
Supply and accessories
Please provide the complete order code. If you need a power supply, connection cables or help with configuration, include them in your enquiry. We will confirm the scope of supply and required accessories for your installation in the quotation.
Documentation and software
Diagrams and hardware version
The images help identify the hardware version. When replacing an older unit, compare its label, connectors and dimensions; we will confirm the version to be supplied in the quotation.
Frequently asked questions
Is knowing the two protocols enough?
The device roles, physical interfaces and data to be transferred must also be checked. The gateway does not act as a controller on either side. Do not select it to control EtherNet/IP Adapter or PROFINET Device equipment without the corresponding Controller or Scanner.
How is this converter configured?
In Compositor SW67660, configure the PROFINET and EtherNet/IP network parameters and data lengths. Define the corresponding data areas and their meaning in both controller projects.
What information should I send to check the selection?
Send the exact device models at both ends, the protocols and communication roles, the number of devices and the required values. For a PLC, include the firmware and method of accessing its data.
FOXON support with selection and ordering
Selection based on your devices
We will review the specific connection, communication roles and required data.
Availability check
Before you place an order, we will confirm current availability and the possible delivery date.
Documentation for the exact order code
We select the documentation and configuration tool using the complete order code.
Accessories for your installation
We will include the requested accessories in the quotation to suit the connection arrangement.
Choosing the correct version
Two devices with the same protocols can have different functions. Check the gateway role on each side, the connectors and the complete order code.
The gateway does not act as a controller on either side. Do not select it to control EtherNet/IP Adapter or PROFINET Device equipment without the corresponding Controller or Scanner.
Converter enquiry HD67660-A1
Provide the order code, quantity and the devices you need to connect. We will check the suitable version and prepare a quotation.
Request the converterTechnical specifications HD67660-A1
| Order code | HD67660-A1 |
|---|---|
| Protocol connection | PROFINET Slave / EtherNet/IP Slave |
| Converter roles | PROFINET Slave; EtherNet/IP Slave |
| Interfaces and ports | 2× Ethernet RJ45 |
| Data capacity | 496 bytes in each direction |
| Power supply | 8-24 V AC / 12-35 V DC |
| Power consumption at 24 V DC | 4 W |
| Operating temperature | -40 °C to +85 °C |
| Mounting | 35 mm DIN rail |
| Dimensions of the version shown (D × W × H) | 123 × 22.5 × 90.7 mm |
| Device weight | approximately 200 g |
| Configuration software | SW67660 |
For an older device, check the hardware version and connections against its label.