Converter PROFINET Slave / Modbus RTU Master - HD67602-485-A1
Converter PROFINET Slave / Modbus RTU Master - HD67602-485-A1
The ADFweb HD67602-485-A1 connects serial Modbus RTU Slave devices to a PROFINET system. It controls data reading and writing as a Modbus Master over RS485 and operates as a Slave on PROFINET. More
Code: HD67602-485-A1
The ADFweb HD67602-485-A1 connects serial Modbus RTU Slave devices to a PROFINET system. It controls data reading and writing as a Modbus Master over RS485 and operates as a Slave on PROFINET. More
Code: HD67602-485-A1
ADFweb HD67602-485-A1
PROFINET Slave / Modbus RTU Master
The ADFweb HD67602-485-A1 connects serial Modbus RTU Slave devices to a PROFINET system. It controls data reading and writing as a Modbus Master over RS485 and operates as a Slave on PROFINET.
We will check your selection and prepare a quotation
Send us the device models, required connection and quantity.
Converter applications
Use it to integrate meters, drives or other Modbus RTU devices into a PROFINET control system. Up to 512 bytes are available for reading and 512 bytes for writing; configure the data mapping to match the registers of the connected devices.
Technical specifications HD67602-485-A1
| Order code | HD67602-485-A1 |
|---|---|
| Protocol connection | PROFINET Slave / Modbus RTU Master |
| Converter roles | PROFINET Slave; Modbus RTU Master over RS485 |
| Interfaces and ports | 2× PROFINET RJ45; 1× RS485 |
| Serial data rate | up to 115,200 bit/s |
| Data capacity | 512 bytes in each direction |
| Power supply | 8-24 V AC / 12-35 V DC |
| Power consumption at 24 V DC | 3.5 W |
| Operating temperature | -40 °C to +85 °C |
| Mounting | 35 mm DIN rail |
| Dimensions of the version shown (D × W × H) | 123 × 22.5 × 90.7 mm |
| Device weight | approximately 200 g |
| Configuration software | SW67602 |
For an older device, check the hardware version and connections against its label.
Communication and configuration
In Compositor SW67602, configure PROFINET, the RS485 serial line and the Modbus read and write requests. Define their mapping to the PROFINET data areas and prepare integration into the controller project.
This order code uses RS485. The RS232 and RS422 versions have different codes. The connected serial device must operate as a Modbus Slave; Ethernet is not a Modbus TCP interface on this model.
Supply and accessories
Please provide the complete order code. If you need a power supply, connection cables or help with configuration, include them in your enquiry. We will confirm the scope of supply and required accessories for your installation in the quotation.
Documentation and software
Diagrams and hardware version
The images help identify the hardware version. When replacing an older unit, compare its label, connectors and dimensions; we will confirm the version to be supplied in the quotation.
Frequently asked questions
Is knowing the two protocols enough?
The device roles, physical interfaces and data to be transferred must also be checked. This order code uses RS485. The RS232 and RS422 versions have different codes. The connected serial device must operate as a Modbus Slave; Ethernet is not a Modbus TCP interface on this model.
How is this converter configured?
In Compositor SW67602, configure PROFINET, the RS485 serial line and the Modbus read and write requests. Define their mapping to the PROFINET data areas and prepare integration into the controller project.
What information should I send to check the selection?
Send the exact device models at both ends, the protocols and communication roles, the number of devices and the required values. For a PLC, include the firmware and method of accessing its data.
FOXON support with selection and ordering
Selection based on your devices
We will review the specific connection, communication roles and required data.
Availability check
Before you place an order, we will confirm current availability and the possible delivery date.
Documentation for the exact order code
We select the documentation and configuration tool using the complete order code.
Accessories for your installation
We will include the requested accessories in the quotation to suit the connection arrangement.
Choosing the correct version
Two devices with the same protocols can have different functions. Check the gateway role on each side, the connectors and the complete order code.
This order code uses RS485. The RS232 and RS422 versions have different codes. The connected serial device must operate as a Modbus Slave; Ethernet is not a Modbus TCP interface on this model.
Converter enquiry HD67602-485-A1
Provide the order code, quantity and the devices you need to connect. We will check the suitable version and prepare a quotation.
Request the converterTechnical specifications HD67602-485-A1
| Order code | HD67602-485-A1 |
|---|---|
| Protocol connection | PROFINET Slave / Modbus RTU Master |
| Converter roles | PROFINET Slave; Modbus RTU Master over RS485 |
| Interfaces and ports | 2× PROFINET RJ45; 1× RS485 |
| Serial data rate | up to 115,200 bit/s |
| Data capacity | 512 bytes in each direction |
| Power supply | 8-24 V AC / 12-35 V DC |
| Power consumption at 24 V DC | 3.5 W |
| Operating temperature | -40 °C to +85 °C |
| Mounting | 35 mm DIN rail |
| Dimensions of the version shown (D × W × H) | 123 × 22.5 × 90.7 mm |
| Device weight | approximately 200 g |
| Configuration software | SW67602 |
For an older device, check the hardware version and connections against its label.