8015-8GT2GS-I - VOLKTEK industrial managed Gigabit switch, 8× RJ45 + 2× SFP
- Switches and Wi-Fi
- Managed Switches
- 8015-8GT2GS-I - VOLKTEK industrial managed Gigabit switch, 8× RJ45 + 2× SFP
8015-8GT2GS-I - VOLKTEK industrial managed Gigabit switch, 8× RJ45 + 2× SFP
8× RJ45 and 2× SFP.
Management and software monitoring
Lite Managed industrial switch with eight Gigabit RJ45 ports and two 100/1000 Mbit/s SFP slots. LAMUNGAN web management, VLAN, STP/RSTP, ERPS and Modbus TCP connect and monitor industrial devices. Two 24-48 V DC inputs, IP40 housing and operating temperature -40 to +75 °C.
2 DIP switches for power alarms.
Enable monitoring of the main PWR input and redundant RPS input separately. Configure ports, VLANs and other network functions in LAMUNGAN.

We’ll select a switch for your industrial network
We can help you choose the right model and power supply. We will confirm the price, current stock availability and delivery date.
Managed Ethernet for machines and control cabinets
8015-8GT2GS-I connects PLCs, HMIs and industrial computers. LAMUNGAN helps with initial setup, viewing connected devices and checking network traffic. Two SFP slots allow optical uplinks to be selected according to fiber type and required distance.
Wizard for initial setup
The wizard guides you through network access and login settings. Complete the basic configuration directly in a web browser.
Topology Map and Dashboard
The topology map shows connected devices and link status. The dashboard clearly displays operating data and switch utilisation.
Technical specifications
| Order reference | VOLKTEK 8015-8GT2GS-I |
|---|---|
| Model | Lite Managed industrial Ethernet switch |
| Copper ports | 8× 10/100/1000BASE-T, RJ45 connector |
| SFP slots | 2× 100BASE-FX / Gigabit Ethernet, SFP 100/1000 Mbit/s |
| Automatic adaptation | Auto-negotiation and Auto MDI/MDI-X on all copper ports |
| Switching capacity | 20 Gbit/s |
| MAC address table | 8K entries |
| Jumbo frames | 10 Kbytes |
| Web interface | LAMUNGAN: Wizard, Topology Map, Dashboard |
| Management and monitoring | HTTPS, SSH, SNMP v1/v2c/v3, SNMP Trap, Syslog, SNTP, LLDP, DHCP Client, Modbus TCP |
| Configuration | Configuration backup and restore; firmware updates; remote reboot; port settings |
| VLAN | IEEE 802.1Q VLAN, Management VLAN, port isolation |
| Network redundancy | STP/RSTP, ERPS v1/v2 |
| Traffic control | IEEE 802.1p QoS, Flow Control, Storm Control, rate limiting, port mirroring |
| Access security | IEEE 802.1X, ACL, MAC address limit per port, BPDU Guard, BPDU Filter, ROOT Guard |
| Power supply | Two inputs: primary PWR and redundant RPS, each 24-48 V DC |
| Power connection | 6-pole PWR/RPS/ALM terminal block |
| Power consumption | Max. 11 W |
| Alarm output | 1 relay contact, rated at 1 A at 24 V DC |
| DIP switches | 2 switches to enable or disable PWR and RPS alarms |
| Signalling | PWR, RPS, ALM, SFP, 1000 and LNK/ACT |
| Housing and installation | IP40 metal housing; DIN rail mounting |
| Operating temperature | -40 to +75 °C; UL-certified range: -40 to +70 °C |
| Storage temperature | -40 to +85 °C |
| Relative humidity | 5-95 %, non-condensing |
| Dimensions (width × height × depth) | 50 × 116 × 100 mm |
| Weight | 550 g |
Management, network functions and security
VLANs and port isolation
IEEE 802.1Q VLANs and port isolation let you organise network communications. Configure a Management VLAN for management access.
STP/RSTP a ERPS
STP, RSTP and ERPS v1/v2 are available for redundant network paths. Adapt their configuration to the topology and the other devices in the network.
QoS and traffic control
IEEE 802.1p QoS prioritises important communications. Flow Control, Storm Control and rate limiting help manage port load.
Access control
Use HTTPS and SSH for management. Network access can be controlled with 802.1X, ACLs and MAC address limits per port.
Modbus TCP a SNMP
Expose the switch operating and status data to a monitoring system via Modbus TCP or SNMP. Events can be recorded using Syslog.
Configuration backup
Save the settings as a backup and restore them when needed. Firmware updates and remote device reboot are also available.
Power supply, alarm and DIP switches
PWR and RPS each accept 24-48 V DC. If one power supply fails, the other powers the switch. The relay alarm can signal a monitored power supply fault in the control cabinet.
Main input monitoring
DIP switch 1 enables or disables the main PWR supply alarm.
Redundant input monitoring
DIP switch 2 enables or disables the redundant RPS supply alarm.
The alarm contact is rated at 1 A at 24 V DC and opens when a monitored fault occurs. The two power inputs do not store energy; use a separate backed-up supply to bridge a complete mains power failure.
Interfaces and installation





IP40 does not protect against water. Use a 24-48 V DC SELV supply, grounding and Category 5e or higher Ethernet cabling. Leave at least 50 mm at the sides and between switches for ventilation. Operation up to +75 °C is specified by the manufacturer; the UL-certified range ends at +70 °C.
Contents of the package
- 1× VOLKTEK 8015-8GT2GS-I industrial switch
- 1× DIN rail mounting kit
- 1× brief installation guide
The power supply and SFP modules are ordered separately.
Documents to download
Original manufacturer documentation in English. All files are also available in the Downloads tab.
LAMUNGAN platform videos
Official VOLKTEK videos present the built-in web interface, topology map and the Lite Managed range. Videos are in English.
LAMUNGAN for network monitoring and management - Overview of the platform used in 8015-8GT2GS-I.
Getting started with LAMUNGAN
Wizard, Topology Map and Dashboard
Introduction to the platform basic tools.
Lite Managed in industrial networks
Network visibility and remote management
Differences between Unmanaged Premium and Lite Managed ranges.
Frequently Asked Questions
What does Lite Managed mean?
The switch offers LAMUNGAN web management with a setup wizard, topology map and traffic overview. Configure VLANs, traffic priority, ports and access permissions, and use STP/RSTP or ERPS network redundancy.
How do I start configuration?
Connect a computer to an Ethernet port and open the default address 192.168.0.254. The Wizard helps configure network access and the user account. During commissioning, change the default login credentials and adapt the addressing to your network.
What is Modbus TCP used for?
After the service is enabled, the switch provides operating and status data via Modbus TCP for a monitoring system. The user manual contains the register overview and communication settings.
How do the backup power supply and alarm work?
Connect two 24-48 V DC supplies to PWR and RPS. If one fails, the switch remains powered by the other. The DIP switches independently enable each input alarm. A monitored fault opens the 1 A / 24 V DC relay contact. Use a separate backup supply to bridge a complete mains outage.
Are SFP modules included?
The slots support SFP modules for 100BASE-FX and Gigabit Ethernet. SFP modules are selected separately according to the remote device, fiber type, distance and operating temperature. The RJ45 ports do not provide PoE power.
What’s included in the pack, and can you help me choose accessories?
The package contains one 8015-8GT2GS-I switch, a DIN rail mounting kit and a quick installation guide. The power supply and SFP modules are selected separately. We advise on power, wiring and initial setup for your application.
Why buy from FOXON?
We are a VOLKTEK distributor. We supply new, genuine products and assist with their selection and use in industrial networks.
New products with a warranty
We supply the 8015-8GT2GS-I as a new, genuine VOLKTEK switch with a warranty and manufacturer documentation.
Technical support
We can advise you on selecting a switch, power supply and accessories. We will discuss the wiring and requirements of your application.
Stock availability and delivery
We will check current stock availability and confirm the price and estimated delivery date before you place your order.
Pre-purchase consultation
We help select a model based on device count, transfer speed, power supply and operating conditions. We will discuss network management, VLAN and traffic monitoring requirements.
Delivery of the 8015-8GT2GS-I switch
A new, original VOLKTEK product. This offer is for model 8015-8GT2GS-I with two SFP slots. Price, current stock availability and accessories are confirmed on enquiry.
Industrial networking consultancy
Please describe the connected devices, the number of ports required and the desired communication speed. We will discuss power supply, the control cabinet environment and network management requirements. We will help you select a suitable VOLKTEK switch and the necessary accessories.
Enquiry for 8015-8GT2GS-I
Send us the required quantity, connected devices, power supply and network management requirements. We will prepare a quotation for a new switch and help select the accessories.
We’ll select a switch for your industrial network
We can help you choose the right model and power supply. We will confirm the price, current stock availability and delivery date.
Technical specifications of the 8015-8GT2GS-I
| Order reference | VOLKTEK 8015-8GT2GS-I |
|---|---|
| Model | Lite Managed industrial Ethernet switch |
| Copper ports | 8× 10/100/1000BASE-T, RJ45 connector |
| SFP slots | 2× 100BASE-FX / Gigabit Ethernet, SFP 100/1000 Mbit/s |
| Automatic adaptation | Auto-negotiation and Auto MDI/MDI-X on all copper ports |
| Switching capacity | 20 Gbit/s |
| MAC address table | 8K entries |
| Jumbo frames | 10 Kbytes |
| Web interface | LAMUNGAN: Wizard, Topology Map, Dashboard |
| Management and monitoring | HTTPS, SSH, SNMP v1/v2c/v3, SNMP Trap, Syslog, SNTP, LLDP, DHCP Client, Modbus TCP |
| Configuration | Configuration backup and restore; firmware updates; remote reboot; port settings |
| VLAN | IEEE 802.1Q VLAN, Management VLAN, port isolation |
| Network redundancy | STP/RSTP, ERPS v1/v2 |
| Traffic control | IEEE 802.1p QoS, Flow Control, Storm Control, rate limiting, port mirroring |
| Access security | IEEE 802.1X, ACL, MAC address limit per port, BPDU Guard, BPDU Filter, ROOT Guard |
| Power supply | Two inputs: primary PWR and redundant RPS, each 24-48 V DC |
| Power connection | 6-pole PWR/RPS/ALM terminal block |
| Power consumption | Max. 11 W |
| Alarm output | 1 relay contact, rated at 1 A at 24 V DC |
| DIP switches | 2 switches to enable or disable PWR and RPS alarms |
| Signalling | PWR, RPS, ALM, SFP, 1000 and LNK/ACT |
| Housing and installation | IP40 metal housing; DIN rail mounting |
| Operating temperature | -40 to +75 °C; UL-certified range: -40 to +70 °C |
| Storage temperature | -40 to +85 °C |
| Relative humidity | 5-95 %, non-condensing |
| Dimensions (width × height × depth) | 50 × 116 × 100 mm |
| Weight | 550 g |

Frequently asked questions about the 8015-8GT2GS-I
What does Lite Managed mean?
The switch offers LAMUNGAN web management with a setup wizard, topology map and traffic overview. Configure VLANs, traffic priority, ports and access permissions, and use STP/RSTP or ERPS network redundancy.
How do I start configuration?
Connect a computer to an Ethernet port and open the default address 192.168.0.254. The Wizard helps configure network access and the user account. During commissioning, change the default login credentials and adapt the addressing to your network.
What is Modbus TCP used for?
After the service is enabled, the switch provides operating and status data via Modbus TCP for a monitoring system. The user manual contains the register overview and communication settings.
How do the backup power supply and alarm work?
Connect two 24-48 V DC supplies to PWR and RPS. If one fails, the switch remains powered by the other. The DIP switches independently enable each input alarm. A monitored fault opens the 1 A / 24 V DC relay contact. Use a separate backup supply to bridge a complete mains outage.
Are SFP modules included?
The slots support SFP modules for 100BASE-FX and Gigabit Ethernet. SFP modules are selected separately according to the remote device, fiber type, distance and operating temperature. The RJ45 ports do not provide PoE power.
What’s included in the pack, and can you help me choose accessories?
The package contains one 8015-8GT2GS-I switch, a DIN rail mounting kit and a quick installation guide. The power supply and SFP modules are selected separately. We advise on power, wiring and initial setup for your application.
