Converter Modbus RTU Slave / IO-Link Master - HD67861-A1-4A
Converter Modbus RTU Slave / IO-Link Master - HD67861-A1-4A
The ADFweb HD67861-A1-4A connects four IO-Link Class A devices to Modbus RTU Slave communication. It operates as an IO-Link Master with four separate ports. More
Code: HD67861-A1-4A
The ADFweb HD67861-A1-4A connects four IO-Link Class A devices to Modbus RTU Slave communication. It operates as an IO-Link Master with four separate ports. More
Code: HD67861-A1-4A
ADFweb HD67861-A1-4A
Modbus RTU Slave / IO-Link Master
The ADFweb HD67861-A1-4A connects four IO-Link Class A devices to Modbus RTU Slave communication. It operates as an IO-Link Master with four separate ports.
We will check your selection and prepare a quotation
Send us the device models, required connection and quantity.
Converter applications
Access IO-Link data from a serial Modbus RTU Master over RS485. The supervisory device reads values and writes commands to configured registers.
Technical specifications HD67861-A1-4A
| Order code | HD67861-A1-4A |
|---|---|
| Protocol connection | Modbus RTU Slave / IO-Link Master |
| Communication roles | IO-Link Master, 4 × Class A; Modbus RTU Slave |
| IO-Link ports | 4 × IO-Link Class A |
| Other interfaces | RS485; Ethernet RJ45 for configuration |
| Data capacity | 1500 bytes in each direction |
| Converter power supply | We will confirm the range against the label and hardware version before ordering |
| Consumption at 24 V DC without connected IO-Link devices | 4 W |
| Operating temperature | -40 °C to +85 °C |
| Mounting | 35 mm DIN rail |
| Dimensions of the version shown (D × W × H) | 120 × 23 × 107 mm |
| Device weight | approximately 200 g |
| Configuration software | SW67861 |
| IO-Link configuration data | Connected device IODD files and process data map |
We will confirm the supply range for this model against the specific hardware version. Always check the device label before connecting the power supply.
Communication and configuration
In SW67861, configure the Modbus RTU Slave baud rate, parity, address and register map. The Ethernet port is used for configuration and updates. In the configurator, assign device IODD files to individual channels and configure process value reading and writing.
Prepare the IODD file and process data length and meaning for each connected device. The -4A version has four Class A ports; check connected device current requirements and the available power supply when designing the installation.
Supply and accessories
Please provide the complete order code. If you need a power supply, connection cables or help with configuration, include them in your enquiry. We will confirm the scope of supply and required accessories for your installation in the quotation.
Documentation and software
Diagrams and hardware version
The images help identify the hardware version. When replacing an older unit, compare its label, connectors and dimensions; we will confirm the version to be supplied in the quotation.
Frequently asked questions
Is knowing the two protocols enough?
The device roles, physical interfaces and data to be transferred must also be checked. Prepare the IODD file and process data length and meaning for each connected device. The -4A version has four Class A ports; check connected device current requirements and the available power supply when designing the installation.
How is this converter configured?
In SW67861, configure the Modbus RTU Slave baud rate, parity, address and register map. The Ethernet port is used for configuration and updates. In the configurator, assign device IODD files to individual channels and configure process value reading and writing.
What information should I send to check the selection?
Send the exact device models at both ends, the protocols and communication roles, the number of devices and the required values. For a PLC, include the firmware and method of accessing its data.
FOXON support with selection and ordering
Selection based on your devices
We will review the specific connection, communication roles and required data.
Availability check
Before you place an order, we will confirm current availability and the possible delivery date.
Documentation for the exact order code
We select the documentation and configuration tool using the complete order code.
Accessories for your installation
We will include the requested accessories in the quotation to suit the connection arrangement.
Choosing the correct version
Two devices with the same protocols can have different functions. Check the gateway role on each side, the connectors and the complete order code.
Prepare the IODD file and process data length and meaning for each connected device. The -4A version has four Class A ports; check connected device current requirements and the available power supply when designing the installation.
Converter enquiry HD67861-A1-4A
Provide the order code, quantity and the devices you need to connect. We will check the suitable version and prepare a quotation.
Request the converterTechnical specifications HD67861-A1-4A
| Order code | HD67861-A1-4A |
|---|---|
| Protocol connection | Modbus RTU Slave / IO-Link Master |
| Communication roles | IO-Link Master, 4 × Class A; Modbus RTU Slave |
| IO-Link ports | 4 × IO-Link Class A |
| Other interfaces | RS485; Ethernet RJ45 for configuration |
| Data capacity | 1500 bytes in each direction |
| Converter power supply | We will confirm the range against the label and hardware version before ordering |
| Consumption at 24 V DC without connected IO-Link devices | 4 W |
| Operating temperature | -40 °C to +85 °C |
| Mounting | 35 mm DIN rail |
| Dimensions of the version shown (D × W × H) | 120 × 23 × 107 mm |
| Device weight | approximately 200 g |
| Configuration software | SW67861 |
| IO-Link configuration data | Connected device IODD files and process data map |
We will confirm the supply range for this model against the specific hardware version. Always check the device label before connecting the power supply.