8; standard and up to 12 at 24 V DC encoder inputs as digital inputsDigital inputs / Number of digital inputs
600 m; shielded cable recommended if filtering set in 1.6 ms frame.Digital inputs / Cable length / Cable length, shielded, max.
Application and selection
Compare the complete order number and specifications below with the original part and machine wiring. Check the design, interfaces, supply voltage or connection method as applicable to this product.
Technical specifications
Manufacturer
Siemens
Order number
6ES7352-5AH10-0AE0
Product type designation
SIMATIC S7-300 module
Supply voltages / Rated value / DC 24 V
Yes
Voltages and currents / Load voltage L+ / Rated value (DC)
24 V
Voltages and currents / Load voltage L+ / reverse polarity protection
Yes
Voltages and currents / Load voltage L+ / permissible range, lower limit (DC)
20.4 V
Voltages and currents / Load voltage L+ / permissible range, upper limit (DC)
28.8 V
Current consumption / from load voltage1L+, max.
150 mA; typ. 60 mA
Current consumption / from load voltage 2L+ (without load), max.
200 mA; typ. 60 mA, DI/DO supply
Current consumption / from load voltage 3L+ (with encoder), max.
600 mA; typ. 80 mA plus encoder supply
Current consumption / from load voltage 3L+ (without encoder), max.
200 mA; typ. 80 mA
Current consumption / from backplane bus DC 5 V, max.
1100 mA; typically
Current consumption / Power loss, typ.
6.5 W
Memory / Memory Card, RAM
128 KByte; required for operation, MMC
Interfaces / Updating time
PLC interface: 5ms (2.6 ms typ)
Connection point / required front connectors
1 x 40-pin
CPU/programming / Program cycle time (scan)
1 µs
Digital inputs / Number of digital inputs
8; standard and up to 12 at 24 V DC encoder inputs as digital inputs
Digital inputs / Cable length / Cable length, shielded, max.
600 m; shielded cable recommended if filtering set in 1.6 ms frame.
Digital inputs / Cable length / Cable length unshielded, max.
100 m
Digital inputs / Input voltage / Rated value, DC
24 V
Digital inputs / Input voltage / for signal "0"
30 V to 5 V
Digital inputs / Input voltage / for signal "1"
11 to 30 V
Digital inputs / Input current / for signal "0", max. (permissible quiescent current)
1.5 mA
Digital inputs / Input current / for signal "1", typ.
3.8 mA
Input delay (for rated value of input voltage) / Input frequency (with 0.1 ms delay), max.
200 kHz
Input delay (for rated value of input voltage) / Programmable digital filter delay
None, 5µs, 10µs, 15µs, 20µs, 50µs, 1.5ms
Input delay (for rated value of input voltage) / Minimum pulse width for program reactions
1µs, 5µs, 10µs, 15µs, 20µs, 50µs, 1.6ms
Input delay (for rated value of input voltage) / for standard inputs / at "0" to "1", max.
3 µs; typ. 1.5 µs
Digital outputs / Number of digital outputs
8
Digital outputs / P-switching
Yes
Digital outputs / Cable length, shielded, max.
600 m
Digital outputs / Cable length unshielded, max.
100 m
Digital outputs / Short-circuit protection of the output
Yes; Overvoltage protection, thermal protection
Digital outputs / Response threshold, typ.
1.7 A to 3.5 A
Digital outputs / Limitation of inductive shutdown voltage to
2M +45 V typ, (40 to 55 V) Note: no protection against inductive kickback >55mJ
Digital outputs / Lamp load, max.
5 W
Digital outputs / Controlling a digital input
No
Digital outputs / Output voltage / Rated value (DC)
24 V
Digital outputs / Output voltage / for signal "0" (DC), max.
28.8 V
Digital outputs / Output voltage / for signal "1" (DC), max.
0.5 V
Digital outputs / Output current / for signal "1" rated value
0.5 A; at 60 °C
Digital outputs / Output current / for signal "1" permissible range for 0 to 60 °C, min.
5 mA
Digital outputs / Output current / for signal "1" permissible range for 0 to 60 °C, max.
600 mA
Digital outputs / Output current / for signal "0" residual current, max.
1 mA
Digital outputs / Output delay with resistive load / "0" to "1", max.
1 µs; 0.6 µs 50 mA / 1.0 µs 0.5 Amp
Digital outputs / Output delay with resistive load / "1" to "0", max.
1.5 µs; 1.7µs 50 mA / 1.5µs 0.5 Amp
Digital outputs / Parallel switching of 2 outputs / for increased power
Yes; 2
Switching frequency / with resistive load, max.
100 kHz; 20 kHz at 0.5 A; 100 kHz at 0.25 A
Switching frequency / with inductive load, max.
2 Hz; 2 Hz at 0.5 A with external commutator diodes; 0.5 Hz at 0.5 A without external commutator diodes
Switching frequency / on lamp load, max.
10 Hz
Encoder supply / 5 V encoder supply / 5 V
Yes
Encoder supply / 5 V encoder supply / Short-circuit protection
Yes; Electronic overload. No protection on applying a normal or counter voltage.
Encoder supply / 24 V encoder supply / Short-circuit protection
Yes; Overvoltage and overheating protection if overloaded. Diagnostics if output reaches temperature limit. No protection when setting up a normal or counter voltage
Encoder signal evaluation / Counting direction, forward
Yes
Encoder signal evaluation / Counting direction, backward
Yes
Reaction times / Input and output reaction timet
5V input to 24V output, 0-filter: 1 to 4µs (typ.); 24V input to 24V output, 0-filter: 2 to 6µs (typ.)
Counters / Counting range, Description
Counter range (16-bit counter): - 32768 to 32767 (user-specific within this range); counter range (32-bit counter): - 2,147,483,648 to 2,147,483,647 (user-specific within this range)
Status information/ alarms/diagnostics / Alarms / Process alarm
Yes; 8 available; for generation by user program
Status information/ alarms/diagnostics / Diagnoses / Wire break in signal encoder cable
Yes
Status information/ alarms/diagnostics / Diagnoses / Overflow/underflow
Yes
Status information/ alarms/diagnostics / Diagnoses / missing load voltage
Yes
Isolation / between 1L and 2L and 3L
Yes; 75 V DC / 60 V AC
Isolation / between digital I/O & 2L and encoder I/O & 3L
Yes (75 V DC, 60 V AC)
Isolation / between backplane bus and digital & encoder I/O & 1L & 2L & 3L
Yes (75 V DC, 60 V AC)
Isolation / Galvanic isolation, digital inputs / galvanic isolation, digital inputs
Yes
Dimensions and weight / Width
80 mm
Dimensions and weight / Height
125 mm
Dimensions and weight / Depth
120 mm
Weights / Weight, approx.
434 g
Connections and conditions of use
Interfaces / Updating time: PLC interface: 5ms (2.6 ms typ)
Connection point / required front connectors: 1 x 40-pin
Digital inputs / Input voltage / for signal "0": 30 V to 5 V
Digital inputs / Input voltage / for signal "1": 11 to 30 V
Digital inputs / Input current / for signal "0", max. (permissible quiescent current): 1.5 mA
Digital inputs / Input current / for signal "1", typ.: 3.8 mA
Digital outputs / Output voltage / for signal "0" (DC), max.: 28.8 V
Digital outputs / Output voltage / for signal "1" (DC), max.: 0.5 V
Scope of supply
We will confirm the exact version, package contents and related accessories before ordering. Package information in the technical table applies to the stated order number.
Frequently asked questions
Is the same product family enough to identify a replacement?
The complete order number is essential. If the type changes, compare the electrical and mechanical design, connections and requirements of the original application.
What information is needed to check connections and accessories?
Send a nameplate photo, the designations of related modules and connectors and, where needed, a wiring diagram. We will check the specific version for your application.
Can you assess a faulty part?
Yes. Send the complete order number and a description of the fault. We will check the diagnostic and professional repair options for your specific unit.
Why buy from FOXON
1
Replacement part availability
We will check current part availability and confirm the possible delivery date before you order.
2
New original and refurbished parts
We will specify the available version and condition of the particular unit in the quotation.
3
Parts with a warranty
We will confirm the warranty period according to the part condition and specific quotation.
4
Diagnostics and repairs
For a faulty unit, we will check the options for diagnostics and professional repair.
More than 3,500customers
We deliver tomore than 100 countries
Express delivery?We will check. Contact us now.
Part conditions available for sale
Part conditions and warranty
New, sealed (NC): Brand-new, unused part in unopened original packaging. 12-month warranty.
New, opened (NO): Brand-new and unused part, but the original packaging has been opened. 12-month warranty.
New, without packaging (NW): Brand-new and unused part, supplied without original packaging. 12-month warranty.
New (N): New and unused part, typically smaller components supplied in multi-packs in one original package. 12-month warranty.
Refurbished (R): Part has been removed from service, cleaned, inspected and tested to meet original functionality and quality. 12-month warranty.
Used, tested (T): Functional used part that has passed full testing. 6-month warranty.
Used (U): Functional used part. 3-month warranty.
Sales, repairs and buyback of automation parts
We supply replacement parts for industrial automation and assess faulty units for diagnostics and repair. We also buy surplus parts. Send the exact designation and required quantity.
