24 VSupply voltage / Load voltage L+ / Rated value (DC)
Application and selection
Compare the complete order number and specifications below with the original part and machine wiring. Check the design, interfaces, supply voltage or connection method as applicable to this product.
Technical specifications
Manufacturer
Siemens
Order number
6ES7222-1HD22-0XA0
Supply voltage / Load voltage L+ / Rated value (DC)
24 V
Supply voltage / Load voltage L+ / permissible range, lower limit (DC)
12 V
Supply voltage / Load voltage L+ / permissible range, upper limit (DC)
30 V
Supply voltage / Load voltage L1 / Rated value (AC)
24 V; 24V AC to 230V AC
Supply voltage / Load voltage L1 / permissible range, lower limit (AC)
12 V
Supply voltage / Load voltage L1 / permissible range, upper limit (AC)
250 V
Input current / from backplane bus 5 V DC, max.
30 mA
Input current / Digital outputs / from load voltage L+, max.
80 mA; 20 mA per switched output
Power loss / Power loss, typ.
4 W
Digital outputs / Number of digital outputs
4; Relays
Digital outputs / Short-circuit protection
No
Digital outputs / Limitation of inductive shutdown voltage to
to be provided externally (see manual package "Setting up an S7-200")
Digital outputs / Output current / for signal "1" rated value
10 A
Digital outputs / Output current / for signal "1" permissible range for 0 to 55 °C, max.
10 A
Digital outputs / Output current / for signal "0" residual current, max.
0 mA
Digital outputs / Total current of the outputs (per group) / all mounting positions / up to 40 °C, max.
40 A
Digital outputs / Total current of the outputs (per group) / all mounting positions / Current per conductor/group, max.
10 A
Digital outputs / Total current of the outputs (per group) / horizontal installation / up to 55 °C, max.
20 A
Digital outputs / Relay outputs / Number of operating cycles, max.
30 000 000; mechanically 30 million, at rated load voltage 30,000
Digital outputs / Relay outputs / Switching capacity of contacts / with inductive load, max.
3 A; 2 A (DC), 3 A (AC)
Digital outputs / Relay outputs / Switching capacity of contacts / on lamp load, max.
1 000 W; 100/1 000 W (DC/AC)
Digital outputs / Relay outputs / Switching capacity of contacts / with resistive load, max.
10 A
Digital outputs / Cable length / shielded, max.
500 m
Digital outputs / Cable length / unshielded, max.
150 m
Potential separation / Potential separation digital outputs / Potential separation digital outputs
Yes; Relays
Potential separation / Potential separation digital outputs / between the channels, in groups of
1; 4 groups
Connection method / Plug-in I/O terminals
Yes
Dimensions / Width
45 mm
Dimensions / Height
80 mm
Dimensions / Depth
62 mm
Weights / Weight, approx.
150 g
Product description
SIMATIC S7-200, digital output EM 222, only for S7-22X CPU, 4 DQ (relay)
Manufacturer specification
10 A, 5-30 V DC or 5-250 V AC
Connections and conditions of use
Supply voltage / Load voltage L+ / Rated value (DC): 24 V
Supply voltage / Load voltage L+ / permissible range, lower limit (DC): 12 V
Supply voltage / Load voltage L+ / permissible range, upper limit (DC): 30 V
Supply voltage / Load voltage L1 / Rated value (AC): 24 V; 24V AC to 230V AC
Supply voltage / Load voltage L1 / permissible range, lower limit (AC): 12 V
Supply voltage / Load voltage L1 / permissible range, upper limit (AC): 250 V
Input current / from backplane bus 5 V DC, max.: 30 mA
Input current / Digital outputs / from load voltage L+, max.: 80 mA; 20 mA per switched output
Scope of supply
We will confirm the exact version, package contents and related accessories before ordering. Package information in the technical table applies to the stated order number.
Frequently asked questions
Is the same product family enough to identify a replacement?
The complete order number is essential. If the type changes, compare the electrical and mechanical design, connections and requirements of the original application.
What information is needed to check connections and accessories?
Send a nameplate photo, the designations of related modules and connectors and, where needed, a wiring diagram. We will check the specific version for your application.
Can you assess a faulty part?
Yes. Send the complete order number and a description of the fault. We will check the diagnostic and professional repair options for your specific unit.
Why buy from FOXON
1
Replacement part availability
We will check current part availability and confirm the possible delivery date before you order.
2
New original and refurbished parts
We will specify the available version and condition of the particular unit in the quotation.
3
Parts with a warranty
We will confirm the warranty period according to the part condition and specific quotation.
4
Diagnostics and repairs
For a faulty unit, we will check the options for diagnostics and professional repair.
More than 3,500customers
We deliver tomore than 100 countries
Express delivery?We will check. Contact us now.
Part conditions available for sale
Part conditions and warranty
New, sealed (NC): Brand-new, unused part in unopened original packaging. 12-month warranty.
New, opened (NO): Brand-new and unused part, but the original packaging has been opened. 12-month warranty.
New, without packaging (NW): Brand-new and unused part, supplied without original packaging. 12-month warranty.
New (N): New and unused part, typically smaller components supplied in multi-packs in one original package. 12-month warranty.
Refurbished (R): Part has been removed from service, cleaned, inspected and tested to meet original functionality and quality. 12-month warranty.
Used, tested (T): Functional used part that has passed full testing. 6-month warranty.
Used (U): Functional used part. 3-month warranty.
Sales, repairs and buyback of automation parts
We supply replacement parts for industrial automation and assess faulty units for diagnostics and repair. We also buy surplus parts. Send the exact designation and required quantity.
