Compare the complete order number and specifications below with the original part and machine wiring. Check the design, interfaces, supply voltage or connection method as applicable to this product.
Technical specifications
Manufacturer
Siemens
Order number
6EP1333-2BA01
Rated output current
5 A
Rated output voltage
24 V DC
Rated input voltage
120 / 230 V AC
Input
Single-phase AC
Rated voltage U in rated
120/230 V AC set via change-over switch
Voltage range
85 V to 132 V AC/170 V to 264 V AC
Overvoltage strength
2.3 x U 1.3 ms in rated,
Line buffering at I out rated
> 20 ms at U = 93/187 V in
Rated line frequency; rated line-frequency range
50/60 Hz; 47 Hz to 63 Hz
Rated current I in rated
2.1/1.15 A
Switch-on current limit (+25°C)
< 32 A, typ. 3 ms
I2t
< 0.8 A2s
Built-in line-side fuse
T 3.15 A/250 V (inaccessible)
Output
Controlled, isolated DC voltage
Rated voltage U out rated
24 V DC
Total tolerance
± 3 %
Static line smoothing
Approx. 0.1%
Static load smoothing
Approx. 0.5%
Adjustment range
22.8 V to 28.0 V
Operation indicator
24 V OK = green LED
Response on activation/deactivation
Overshoot of U approx. 4% out
Startup delay/voltage rise
< 0.1 s at 230 V AC/typ. 50 ms
Rated current I out rated
5 A
Current range / Up to +45°C
0 A to 6 A
Current range / Up to +60°C
0 A to 5 A
Dynamic U/I at / Power-up on short-circuit
Typically 17 A for 100 ms
Dynamic U/I at / Short-circuit during operation
Typically 17 A for 200 ms
Dynamic U/I at / Parallel switching for enhanced performance
Yes, 2
Efficiency / Efficiency at U I out rated, out rated
Approx. 87%
Efficiency / Heat loss at U I out rated, out rated
Approx. 17 W
Control / Dynamic line smoothing (U rated ±15%) in
± 0,3 % U out
Control / Dynamic load smoothing (I : 50/100/50%) out
± 1 % U out
Load-step settling time / 50 at 100%
Typically 0.2 ms
Load-step settling time / 100 at 50%
Typically 0.2 ms
Protection and monitoring / Output overvoltage protection
Yes, acc. to EN 60950 (typ. < 45 V)
Protection and monitoring / Current limit
Typically 6.4 A to 6.6 A, overload capability 150% I up to 5 s/min out rated
Protection and monitoring / Short-circuit protection
Protection and monitoring / Sustained-short-circuit-current rms value
Approx. 10 A
Protection and monitoring / Overload/short-circuit indicator
LED off = overload/short-circuit
Security / Primary/secondary galvanic isolation
Yes, safety extra-low output voltage U to EN out 60950
Security / Leakage current
< 3.5 mA (typ. 0.4 mA)
Operating data / Ambient temperature range
0°C to +60°C with natural convection
Operating data / Transport/storage temperature range
-40°C to +85°C
Operating data / Humidity class
Climate class 3K3 to EN 60721, no condensation
Connections / Supply input L, N, PE
Solid/finely-stranded per screw-type terminal for 0.5 to 2.5 mm²
Connections / Output L+
2 screw-type terminals for 0.5 to 2.5 mm²
Connections / Output M
2 screw-type terminals for 0.5 to 2.5 mm²
Connections / Dimensions (W x H x D) in mm
50 x 125 x 125
Connections / Weight, approx.
0.5 kg
Connections / Mounting
Snaps onto DIN rail DIN EN 50022-35x15/7.5
Product description
Siemens SITOP power supply.
Connections and conditions of use
Rated output current: 5 A
Rated output voltage: 24 V DC
Rated input voltage: 120 / 230 V AC
Rated voltage U in rated: 120/230 V AC set via change-over switch
Voltage range: 85 V to 132 V AC/170 V to 264 V AC
Overvoltage strength: 2.3 x U 1.3 ms in rated,
Rated current I in rated: 2.1/1.15 A
Switch-on current limit (+25°C): < 32 A, typ. 3 ms
Scope of supply
We will confirm the exact version, package contents and related accessories before ordering. Package information in the technical table applies to the stated order number.
Frequently asked questions
Is the same product family enough to identify a replacement?
The complete order number is essential. If the type changes, compare the electrical and mechanical design, connections and requirements of the original application.
What information is needed to check connections and accessories?
Send a nameplate photo, the designations of related modules and connectors and, where needed, a wiring diagram. We will check the specific version for your application.
Can you assess a faulty part?
Yes. Send the complete order number and a description of the fault. We will check the diagnostic and professional repair options for your specific unit.
Why buy from FOXON
1
Replacement part availability
We will check current part availability and confirm the possible delivery date before you order.
2
New original and refurbished parts
We will specify the available version and condition of the particular unit in the quotation.
3
Parts with a warranty
We will confirm the warranty period according to the part condition and specific quotation.
4
Diagnostics and repairs
For a faulty unit, we will check the options for diagnostics and professional repair.
More than 3,500customers
We deliver tomore than 100 countries
Express delivery?We will check. Contact us now.
Part conditions available for sale
Part conditions and warranty
New, sealed (NC): Brand-new, unused part in unopened original packaging. 12-month warranty.
New, opened (NO): Brand-new and unused part, but the original packaging has been opened. 12-month warranty.
New, without packaging (NW): Brand-new and unused part, supplied without original packaging. 12-month warranty.
New (N): New and unused part, typically smaller components supplied in multi-packs in one original package. 12-month warranty.
Refurbished (R): Part has been removed from service, cleaned, inspected and tested to meet original functionality and quality. 12-month warranty.
Used, tested (T): Functional used part that has passed full testing. 6-month warranty.
Used (U): Functional used part. 3-month warranty.
Sales, repairs and buyback of automation parts
We supply replacement parts for industrial automation and assess faulty units for diagnostics and repair. We also buy surplus parts. Send the exact designation and required quantity.
