9015-8GT-I - VOLKTEK industrial managed switch, 8× Gigabit RJ45

9015-8GT-I - VOLKTEK industrial managed switch, 8× Gigabit RJ45

New

Industrial managed VOLKTEK 9015-8GT-I switch, 8× RJ45 / 10/100/1000 Mbit/s. VLAN, LACP, ERPS, SNMPv3 and Modbus TCP. Two 24-48 V DC inputs, relay alarm, IP40, operation -40 to +75 °C. More

Manufacturer: VOLKTEK Code: 9015-8GT-I

Rezervace termínu

Get a quote

Industrial managed VOLKTEK 9015-8GT-I switch, 8× RJ45 / 10/100/1000 Mbit/s. VLAN, LACP, ERPS, SNMPv3 and Modbus TCP. Two 24-48 V DC inputs, relay alarm, IP40, operation -40 to +75 °C. More

Manufacturer: VOLKTEK Code: 9015-8GT-I

VOLKTEK 9015-8GT-I

Eight Gigabit ports.
Management and software monitoring

Industrial managed switch with eight Gigabit RJ45 ports. It provides web and CLI management, VLAN, QinQ, LACP and Modbus TCP. SSH, HTTPS, SNMPv3 and TACACS+ enable management access control. Two 24-48 V DC inputs, IP40 housing and operation from -40 to +75 °C.

8× RJ45 / 10/100/1000 Mbit/sManaged switch2× 24-48 V DC power inputsIP40 / DIN rail

2 DIP switches for power alarms.
Enable monitoring of the primary PWR and redundant RPS inputs separately. Configure ports, VLANs and other network functions through the web interface or CLI.

VOLKTEK 9015-8GT-I - front view, 8× RJ45
Front view of 9015-8GT-I. Click to enlarge the photo.

We’ll select a switch for your industrial network
We can help you choose the right model and power supply. We will confirm the price, current stock availability and delivery date.

Request a VOLKTEK solution
8× Gigabit EthernetAutomatic speed selection of 10/100/1000 Mbit/s on each port
VLAN / LACP / ERPSTraffic management, link aggregation and network redundancy
-40 to +75 °CMetal IP40 housing and DIN rail mounting

Managed Ethernet for machines and control cabinets

9015-8GT-I connects PLCs, HMIs and industrial computers. Adapt VLANs, communication priorities and redundant network paths to the application. All eight RJ45 ports automatically adapt their speed to the connected devices.

Topology map

Topology Map shows connected devices and network connections. It helps operators understand the network layout.

Web and CLI management

Configure the switch in a web browser or through the command line. Use HTTPS and SSH for secure access.

Technical specifications

Order referenceVOLKTEK 9015-8GT-I
ModelIndustrial managed switch
Copper ports8× 10/100/1000BASE-T, RJ45 connector
Optical interfaceNo optical ports or SFP slots
Automatic adaptationAuto-negotiation and Auto MDI/MDI-X on all copper ports
Switching capacity16 Gbit/s
MAC address table8K entries
Jumbo frames10 Kbytes
Management and monitoringWeb interface, CLI, SSH, HTTPS, SNMP v1/v2c/v3, Syslog, LLDP, Modbus TCP
ConfigurationConfiguration backup and restore; firmware updates; remote reboot; port settings
VLANIEEE 802.1Q VLAN, Management VLAN, port isolation, MAC-based VLAN, QinQ
Network redundancySTP/RSTP, ERPS v1/v2, Dual Homing
Link aggregationLACP, Static Trunk
Traffic controlQoS, Flow Control, Storm Control, IGMP Snooping, rate limiting
Access securityIEEE 802.1X, TACACS+, ACL, Port Security, DHCP Snooping
DHCP servicesDHCP Client, Relay and Option 82
Power supplyTwo inputs: primary PWR and redundant RPS, each 24-48 V DC
Power connection6-pole PWR/RPS/ALM terminal block
Power consumptionMax. 10 W
Alarm output1 relay contact, rated at 1 A at 24 V DC
DIP switches2 switches to enable or disable PWR and RPS alarms
Topology mapTopology Map
SignallingPWR, RPS, ALM, 1000 and LNK/ACT
Housing and installationIP40 metal housing; DIN rail mounting
Operating temperature-40 to +75 °C
Storage temperature-40 to +85 °C
Relative humidity5-95 %, non-condensing
Dimensions (width × height × depth)50 × 116 × 100 mm
Weight550 g

Management, network functions and security

VLAN and QinQ

IEEE 802.1Q VLAN and port isolation organize communication within the network. QinQ supports frames with nested VLAN tags.

Network redundancy

STP/RSTP, ERPS and Dual Homing support redundant network paths. Adapt the settings to the topology and other devices.

LACP link aggregation

Combine multiple physical links into one logical group. Configure the aggregation settings on the remote device as well.

Authentication and access control

Use SSH, HTTPS and SNMPv3 for management. IEEE 802.1X, TACACS+, ACL and DHCP Snooping help control access and protect communication.

IGMP Snooping

Limit multicast forwarding to interested ports. This helps reduce load on other links.

Monitoring and configuration

SNMP, Syslog and Modbus TCP provide switch status information to supervisory systems. Configuration can be backed up and restored; DHCP Relay and Option 82 are also supported.

Power supply, alarm and DIP switches

PWR and RPS each accept 24-48 V DC. If one power supply fails, the other powers the switch. The relay alarm can signal a monitored power supply fault in the control cabinet.

Main input monitoring

DIP switch 1 enables or disables the main PWR supply alarm.

Redundant input monitoring

DIP switch 2 enables or disables the redundant RPS supply alarm.

The alarm contact is rated at 1 A at 24 V DC and opens when a monitored fault occurs. The two power inputs do not store energy; use a separate backed-up supply to bridge a complete mains power failure.

Interfaces and installation

VOLKTEK 9015-8GT-I - overview of interfaces, connectors and status indicators
Interface overview of 9015-8GT-I. Original manufacturer diagram with English labels. Click to enlarge.
VOLKTEK 9015-8GT-I - dimensional drawing 50 × 116 × 100 mm
Body dimensions 50 × 116 × 100 mm (W × H × D). Click to open full resolution.

IP40 does not protect against water. Use a 24-48 V DC SELV supply, grounding and Category 5e or higher Ethernet cabling. Leave at least 50 mm at the sides and between switches for ventilation.

Contents of the package

  • 1× VOLKTEK 9015-8GT-I industrial switch
  • 1× DIN rail mounting kit
  • 1× brief installation guide

The power supply is ordered separately.

Documents to download

Original manufacturer documentation in English. All files are also available in the Downloads tab.

9015-8GT-I Technical Data SheetSpecifications, functions and dimensions / ENOpen the technical data sheet
Quick installation guidePower supply, connections and mounting / ENOpen the installation guide
User manualWeb management, network functions and configuration / ENOpen the user manual

Industrial Ethernet videos

Official VOLKTEK videos explain Ethernet principles, DHCP and the industrial networking portfolio. These are general demonstrations; functions and interfaces vary by model. The videos are in English.

Ethernet switches and their applications

DHCP in an Ethernet network

DHCP principles and functions

VOLKTEK’s industrial portfolio

VOLKTEK products and their purpose

Frequently Asked Questions

Which management functions does the switch offer?

Configure the network through the web interface or CLI. VLAN, QinQ, QoS, STP/RSTP, ERPS and LACP link aggregation are available. Use SNMP and Modbus TCP for monitoring; access can be controlled through 802.1X, TACACS+ and ACL.

How do I start configuration?

Connect a computer to an Ethernet port and open the default address 192.168.0.254. Set the addressing for your network and change the default login credentials. Prepare VLAN, redundancy and access permissions before connecting to the production network.

What is Modbus TCP used for?

After the service is enabled, the switch provides operating and status data via Modbus TCP for a monitoring system. The user manual contains the register overview and communication settings.

How do the backup power supply and alarm work?

Connect two 24-48 V DC supplies to PWR and RPS. If one fails, the switch remains powered by the other. The DIP switches independently enable each input alarm. A monitored fault opens the 1 A / 24 V DC relay contact. Use a separate backup supply to bridge a complete mains outage.

Does the switch have optical ports or PoE?

9015-8GT-I has eight Gigabit copper RJ45 ports. This model has no optical ports or SFP slots, and its ports do not supply PoE power. We can help select another model if you need these functions.

What’s included in the pack, and can you help me choose accessories?

The package contains one 9015-8GT-I switch, a DIN rail mounting kit and a quick installation guide. The power supply is selected separately. We advise on power, wiring and initial setup for your application.

Why buy from FOXON?

We are a VOLKTEK distributor. We supply new, genuine products and assist with their selection and use in industrial networks.

New products with a warranty

We supply the 9015-8GT-I as a new, genuine VOLKTEK switch with a warranty and manufacturer documentation.

Technical support

We can advise you on selecting a switch, power supply and accessories. We will discuss the wiring and requirements of your application.

Stock availability and delivery

We will check current stock availability and confirm the price and estimated delivery date before you place your order.

Pre-purchase consultation

We help select a model based on device count, transfer speed, power supply and operating conditions. We will discuss network management, VLAN and traffic monitoring requirements.

More than 3,500customers
We supply tomore than 100 countries worldwide
Express delivery?We’ll look into it; please contact us immediately.

Delivery of the 9015-8GT-I switch

A new, original VOLKTEK product. This offer is for model 9015-8GT-I. Price, current stock availability and accessories are confirmed on enquiry.

Industrial networking consultancy

Please describe the connected devices, the number of ports required and the desired communication speed. We will discuss power supply, the control cabinet environment and network management requirements. We will help you select a suitable VOLKTEK switch and the necessary accessories.

Enquiry for 9015-8GT-I

Send us the required quantity, connected devices, power supply and network management requirements. We will prepare a quotation for a new switch and help select the accessories.

We’ll select a switch for your industrial network
We can help you choose the right model and power supply. We will confirm the price, current stock availability and delivery date.

Request a VOLKTEK solution
Parameters
Switch management Managed
Number of copper ports 8
Number of fixed fiber ports 0
Number of SFP slots 0
Number of SFP+ slots 0
Copper port speed 1 Gbit/s

Technical specifications of the 9015-8GT-I

Order referenceVOLKTEK 9015-8GT-I
ModelIndustrial managed switch
Copper ports8× 10/100/1000BASE-T, RJ45 connector
Optical interfaceNo optical ports or SFP slots
Automatic adaptationAuto-negotiation and Auto MDI/MDI-X on all copper ports
Switching capacity16 Gbit/s
MAC address table8K entries
Jumbo frames10 Kbytes
Management and monitoringWeb interface, CLI, SSH, HTTPS, SNMP v1/v2c/v3, Syslog, LLDP, Modbus TCP
ConfigurationConfiguration backup and restore; firmware updates; remote reboot; port settings
VLANIEEE 802.1Q VLAN, Management VLAN, port isolation, MAC-based VLAN, QinQ
Network redundancySTP/RSTP, ERPS v1/v2, Dual Homing
Link aggregationLACP, Static Trunk
Traffic controlQoS, Flow Control, Storm Control, IGMP Snooping, rate limiting
Access securityIEEE 802.1X, TACACS+, ACL, Port Security, DHCP Snooping
DHCP servicesDHCP Client, Relay and Option 82
Power supplyTwo inputs: primary PWR and redundant RPS, each 24-48 V DC
Power connection6-pole PWR/RPS/ALM terminal block
Power consumptionMax. 10 W
Alarm output1 relay contact, rated at 1 A at 24 V DC
DIP switches2 switches to enable or disable PWR and RPS alarms
Topology mapTopology Map
SignallingPWR, RPS, ALM, 1000 and LNK/ACT
Housing and installationIP40 metal housing; DIN rail mounting
Operating temperature-40 to +75 °C
Storage temperature-40 to +85 °C
Relative humidity5-95 %, non-condensing
Dimensions (width × height × depth)50 × 116 × 100 mm
Weight550 g
VOLKTEK 9015-8GT-I - dimensional drawing 50 × 116 × 100 mm
Manufacturer’s dimensional drawing. Housing dimensions: 50 × 116 × 100 mm (W × H × D). Click to view full resolution.

Frequently asked questions about the 9015-8GT-I

Which management functions does the switch offer?

Configure the network through the web interface or CLI. VLAN, QinQ, QoS, STP/RSTP, ERPS and LACP link aggregation are available. Use SNMP and Modbus TCP for monitoring; access can be controlled through 802.1X, TACACS+ and ACL.

How do I start configuration?

Connect a computer to an Ethernet port and open the default address 192.168.0.254. Set the addressing for your network and change the default login credentials. Prepare VLAN, redundancy and access permissions before connecting to the production network.

What is Modbus TCP used for?

After the service is enabled, the switch provides operating and status data via Modbus TCP for a monitoring system. The user manual contains the register overview and communication settings.

How do the backup power supply and alarm work?

Connect two 24-48 V DC supplies to PWR and RPS. If one fails, the switch remains powered by the other. The DIP switches independently enable each input alarm. A monitored fault opens the 1 A / 24 V DC relay contact. Use a separate backup supply to bridge a complete mains outage.

Does the switch have optical ports or PoE?

9015-8GT-I has eight Gigabit copper RJ45 ports. This model has no optical ports or SFP slots, and its ports do not supply PoE power. We can help select another model if you need these functions.

What’s included in the pack, and can you help me choose accessories?

The package contains one 9015-8GT-I switch, a DIN rail mounting kit and a quick installation guide. The power supply is selected separately. We advise on power, wiring and initial setup for your application.