Industrial Ethernet FC TP Standard cable, GP 2x2 (PROFINET Type A), TP installation cable for connection to IE FC RJ45 2x2, for universal use, 4-core, shielded CAT 5E, sold by the meter, delivery unit max. 4000 m minimum order quantity 20 m. More
Industrial Ethernet FC TP Standard cable, GP 2x2 (PROFINET Type A), TP installation cable for connection to IE FC RJ45 2x2, for universal use, 4-core, shielded CAT 5E, sold by the meter, delivery unit max. 4000 m minimum order quantity 20 m. More
6XV1840-2AH10 – IE FC TP Standard Cable GP 2x2 (Type A)
Industrial Ethernet FC TP Standard cable, GP 2x2 (PROFINET Type A), TP installation cable for connection to IE FC RJ45 2x2, for universal use, 4-core, shielded CAT 5E, sold by the meter, delivery unit max. 4000 m minimum order quantity 20 m.
Need to buy or repair this part? We will check replacement part availability and the options for diagnosing and repairing your faulty unit.
0.052 dB/melectrical data / attenuation factor per length / at 10 MHz / maximum
0.195 dB/melectrical data / attenuation factor per length / at 100 MHz / maximum
Application and selection
Compare the complete order number and specifications below with the original part and machine wiring. Check the design, interfaces, supply voltage or connection method as applicable to this product.
Technical specifications
Manufacturer
Siemens
Order number
6XV1840-2AH10
product type designation
IE FC TP Standard Cable GP 2x2 (Type A)
suitability for use
Standard cable with rigid cores for fast installation
cable designation
SF/UTP, 2YY (ST) CY 2x2x0,64/1,5-100 GN
wire length
sold by the meter
electrical data / attenuation factor per length / at 10 MHz / maximum
0.052 dB/m
electrical data / attenuation factor per length / at 100 MHz / maximum
0.195 dB/m
electrical data / impedance / at 1 MHz ... 100 MHz
100 Ω
electrical data / relative symmetrical tolerance / of the characteristic impedance at 1 MHz … 100 MHz
15 %
electrical data / near-end crosstalk per length / at 1 MHz ... 100 MHz
0.5 dB/m
electrical data / transfer impedance per length / at 10 MHz
10 mΩ/m
electrical data / loop resistance per length / maximum
115 mΩ/m
electrical data / operating voltage / RMS value
80 V
electrical data / NVP value in percent
69 %
mechanical data / number of electrical cores
4
mechanical data / design of the shield
SF/UTP, overlapped aluminum-clad foil, sheathed in a protective braided shield of tinned copper wires
mechanical data / type of electrical connection / FastConnect
Yes
mechanical data / core diameter / of AWG22 insulated conductor
0.64 mm
mechanical data / outer diameter / of inner conductor
0.64 mm
mechanical data / outer diameter / of the wire insulation
1.5 mm
mechanical data / outer diameter / of the inner sheath of the cable
3.9 mm
mechanical data / outer diameter / of cable sheath
6.5 mm
mechanical data / symmetrical tolerance of the outer diameter / of cable sheath
0.2 mm
mechanical data / material / of the wire insulation
polyethylene (PE)
mechanical data / material / of the inner sheath of the cable
PVC
mechanical data / material / of cable sheath
PVC
mechanical data / color / of the insulation of data wires
white/yellow/blue/orange
mechanical data / color / of cable sheath
green
mechanical data / bending radius / with single bend / minimum permissible
19.5 mm
mechanical data / bending radius / with multiple bends / minimum permissible
49 mm
mechanical data / tensile load / maximum
150 N
mechanical data / weight per length
61 kg/km
ambient conditions / ambient temperature / during operation
-40 ... +75 °C
ambient conditions / ambient temperature / during storage
-40 ... +75 °C
ambient conditions / ambient temperature / during transport
-40 ... +75 °C
ambient conditions / ambient temperature / during installation
-40 ... +60 °C
ambient conditions / ambient temperature / note
electrical properties measured at 20 °C
ambient conditions / fire behavior
flame resistant according to IEC 60332-3-24 (Category C) and UL 1685 (CSA FT 4)
ambient conditions / class of burning behaviour / according to EN 13501-6
Eca
ambient conditions / chemical resistance / to mineral oil
oil resistant according to IEC 60811-2-1 (4 h / 70°C)
ambient conditions / chemical resistance / to grease
Conditional resistance
ambient conditions / chemical resistance / to water
conditional resistance
ambient conditions / radiological resistance / to UV radiation
product features, product functions, product components / general / wire length / for Industrial Ethernet / with 100BaseTX
100 m
product features, product functions, product components / general / test voltage / at AC / core-to-core
2000 V
product features, product functions, product components / general / test voltage / at AC / core shield
2000 V
Connections and conditions of use
mechanical data / type of electrical connection / FastConnect: Yes
Scope of supply
We will confirm the exact version, package contents and related accessories before ordering. Package information in the technical table applies to the stated order number.
Frequently asked questions
Is the same product family enough to identify a replacement?
The complete order number is essential. If the type changes, compare the electrical and mechanical design, connections and requirements of the original application.
What information is needed to check connections and accessories?
Send a nameplate photo, the designations of related modules and connectors and, where needed, a wiring diagram. We will check the specific version for your application.
Can you assess a faulty part?
Yes. Send the complete order number and a description of the fault. We will check the diagnostic and professional repair options for your specific unit.
Why buy from FOXON
1
Replacement part availability
We will check current part availability and confirm the possible delivery date before you order.
2
New original and refurbished parts
We will specify the available version and condition of the particular unit in the quotation.
3
Parts with a warranty
We will confirm the warranty period according to the part condition and specific quotation.
4
Diagnostics and repairs
For a faulty unit, we will check the options for diagnostics and professional repair.
More than 3,500customers
We deliver tomore than 100 countries
Express delivery?We will check. Contact us now.
Part conditions available for sale
Part conditions and warranty
New, sealed (NC): Brand-new, unused part in unopened original packaging. 12-month warranty.
New, opened (NO): Brand-new and unused part, but the original packaging has been opened. 12-month warranty.
New, without packaging (NW): Brand-new and unused part, supplied without original packaging. 12-month warranty.
New (N): New and unused part, typically smaller components supplied in multi-packs in one original package. 12-month warranty.
Refurbished (R): Part has been removed from service, cleaned, inspected and tested to meet original functionality and quality. 12-month warranty.
Used, tested (T): Functional used part that has passed full testing. 6-month warranty.
Used (U): Functional used part. 3-month warranty.
Sales, repairs and buyback of automation parts
We supply replacement parts for industrial automation and assess faulty units for diagnostics and repair. We also buy surplus parts. Send the exact designation and required quantity.
