28.8 to 5 VDigital inputs / Input voltage / for signal "0"
+11 to +28.8 VDigital inputs / Input voltage / for signal "1"
Application and selection
Compare the complete order number and specifications below with the original part and machine wiring. Check the design, interfaces, supply voltage or connection method as applicable to this product.
Technical specifications
Manufacturer
Siemens
Order number
6ES7450-1AP00-0AE0
Product type
FM 450-1
Voltages and currents / Aux. voltage 1L+, load voltage 2 L+ / Rated value (DC)
24 V
Voltages and currents / Aux. voltage 1L+, load voltage 2 L+ / permissible range, lower limit (DC)
20.4 V; dynamic 18.5 V
Voltages and currents / Aux. voltage 1L+, load voltage 2 L+ / permissible range, upper limit (DC)
28.8 V; dynamic 30.2 V
Voltages and currents / Aux. voltage 1L+, load voltage 2 L+ / non-periodic skip / Duration
500 ms
Voltages and currents / Aux. voltage 1L+, load voltage 2 L+ / non-periodic skip / Recovery time
50 s
Voltages and currents / Aux. voltage 1L+, load voltage 2 L+ / non-periodic skip / Value
35 V
Voltages and currents / Load voltage 1L+ / Reverse polarity protection
Yes
Voltages and currents / Load voltage 2L+ / Reverse polarity protection
Yes
Current consumption / from load voltage 1L+ (without load), max.
40 mA
Current consumption / from backplane bus DC 5 V, max.
450 mA
Current consumption / Power loss, typ.
9 W
Connection point / required front connectors
1 x 48-pin
Digital inputs / Number of digital inputs
6
Digital inputs / Functions
1 for gate start, 1 for gate stop, 1 for setting the counter
Digital inputs / Input voltage / for signal "0"
28.8 to 5 V
Digital inputs / Input voltage / for signal "1"
+11 to +28.8 V
Digital inputs / Input current / for signal "1", typ.
9 mA
Input delay (for rated value of input voltage) / Input frequency (with 0.1 ms delay), max.
200 kHz
Input delay (for rated value of input voltage) / for standard inputs / programmable
Yes
Input delay (for rated value of input voltage) / for standard inputs / at "0" to "1", max.
2.5 µs; >= 2.5 µs (200 kHz); <= 25 µs (20 kHz)
Digital outputs / Number of digital outputs
6
Digital outputs / Short-circuit protection of the output
Yes; clocked electronically
Digital outputs / Limitation of inductive shutdown voltage to
2L+ (-39 V)
Digital outputs / Output voltage / for signal "0" (DC), max.
3 V
Digital outputs / Output voltage / for signal "1", min.
2L+ (-1.5 V)
Digital outputs / Output current / for signal "1" rated value
0,5 A
Digital outputs / Output current / for signal "1" permissible range for 0 to 60 °C, min.
5 mA
Digital outputs / Output current / for signal "1" permissible range for 0 to 60 °C, max.
0.6 A
Digital outputs / Output delay with resistive load / "0" to "1", max.
300 µs
Encoder supply / 5 V encoder supply / 5 V
Yes; 5.2 V +/-2%
Encoder supply / 5 V encoder supply / Short-circuit protection
Encoder / Connectable encoders / 24 V directional element
Yes; 1 pulse train, 1 direction level
Counters / Number of counter inputs
2; 32 bit or +/-31 bit
Counters / Counter input 5 V / Type
RS 422
Counters / Counter input 5 V / Terminating resistor
220 Ω
Counters / Counter input 5 V / Differential input voltage
min. 0.5 V
Counters / Counter input 5 V / Counter frequency, max.
500 kHz
Counters / Counter input 24 V / Input voltage, for signal "0"
30 to +5V
Counters / Counter input 24 V / Input voltage, for signal "1"
+11 to +30 V
Counters / Counter input 24 V / Input current, for signal "1", typ.
9 mA
Counters / Counter input 24 V / Counter frequency, max.
200 kHz
Parameter / Remark
Occupied binary addresses: 64 byte/64 byte
Isolation / Isolation checked with
500 V
Isolation / Isolation, digital outputs / between the channels and the backplane bus
Yes; Optocoupler
Isolation / Galvanic isolation, digital inputs / between the channels and the backplane bus
Yes; Optocoupler
Isolation / Isolation counter / between the channels and the backplane bus
Yes; Optocoupler
Permissible potential difference / between different circuits
DC 75 V / AC 60 V
Dimensions and weight / Width
25 mm
Dimensions and weight / Height
290 mm
Dimensions and weight / Depth
210 mm
Weights / Weight, approx.
650 g
Connections and conditions of use
Connection point / required front connectors: 1 x 48-pin
Digital inputs / Input voltage / for signal "0": 28.8 to 5 V
Digital inputs / Input voltage / for signal "1": +11 to +28.8 V
Digital inputs / Input current / for signal "1", typ.: 9 mA
Digital outputs / Output voltage / for signal "0" (DC), max.: 3 V
Digital outputs / Output voltage / for signal "1", min.: 2L+ (-1.5 V)
Digital outputs / Output current / for signal "1" rated value: 0,5 A
Digital outputs / Output current / for signal "1" permissible range for 0 to 60 °C, min.: 5 mA
Scope of supply
We will confirm the exact version, package contents and related accessories before ordering. Package information in the technical table applies to the stated order number.
Frequently asked questions
Is the same product family enough to identify a replacement?
The complete order number is essential. If the type changes, compare the electrical and mechanical design, connections and requirements of the original application.
What information is needed to check connections and accessories?
Send a nameplate photo, the designations of related modules and connectors and, where needed, a wiring diagram. We will check the specific version for your application.
Can you assess a faulty part?
Yes. Send the complete order number and a description of the fault. We will check the diagnostic and professional repair options for your specific unit.
Why buy from FOXON
1
Replacement part availability
We will check current part availability and confirm the possible delivery date before you order.
2
New original and refurbished parts
We will specify the available version and condition of the particular unit in the quotation.
3
Parts with a warranty
We will confirm the warranty period according to the part condition and specific quotation.
4
Diagnostics and repairs
For a faulty unit, we will check the options for diagnostics and professional repair.
More than 3,500customers
We deliver tomore than 100 countries
Express delivery?We will check. Contact us now.
Part conditions available for sale
Part conditions and warranty
New, sealed (NC): Brand-new, unused part in unopened original packaging. 12-month warranty.
New, opened (NO): Brand-new and unused part, but the original packaging has been opened. 12-month warranty.
New, without packaging (NW): Brand-new and unused part, supplied without original packaging. 12-month warranty.
New (N): New and unused part, typically smaller components supplied in multi-packs in one original package. 12-month warranty.
Refurbished (R): Part has been removed from service, cleaned, inspected and tested to meet original functionality and quality. 12-month warranty.
Used, tested (T): Functional used part that has passed full testing. 6-month warranty.
Used (U): Functional used part. 3-month warranty.
Sales, repairs and buyback of automation parts
We supply replacement parts for industrial automation and assess faulty units for diagnostics and repair. We also buy surplus parts. Send the exact designation and required quantity.
