SIMATIC S7-300, counter module fm 350-2, 8 channels, 20 kHz, 24V encoder for counting, measuring frequencies, speed measurement, period duration measurement and proportioning incl. config. package and electronic docu on CD More
Code: 6ES7350-2AH00-0AE0
1
from141 EUR
excl. VAT (170,61 EUR Incl. VAT)
Total in stock: 11 pcs
FOXON 4 pcs
·
External stock 7 pcs
SIMATIC S7-300, counter module fm 350-2, 8 channels, 20 kHz, 24V encoder for counting, measuring frequencies, speed measurement, period duration measurement and proportioning incl. config. package and electronic docu on CD More
3 to 5 VDigital inputs / Input voltage / for signal "0"
Application and selection
Compare the complete order number and specifications below with the original part and machine wiring. Check the design, interfaces, supply voltage or connection method as applicable to this product.
Technical specifications
Manufacturer
Siemens
Order number
6ES7350-2AH00-0AE0
Product type designation
FM 350-2
Voltages and currents / Aux. voltage 1L+, load voltage 2 L+ / Rated value (DC)
24 V
Voltages and currents / Aux. voltage 1L+, load voltage 2 L+ / permissible range, lower limit (DC)
20.4 V
Voltages and currents / Aux. voltage 1L+, load voltage 2 L+ / permissible range, upper limit (DC)
28.8 V
Current consumption / from load voltage L+ (without load), max.
150 mA
Current consumption / from backplane bus DC 5 V, max.
100 mA
Current consumption / Power loss, typ.
10 W
Connection point / required front connectors
1 x 40-pin
Digital inputs / Number of digital inputs
8
Digital inputs / Functions
1 each for gate start/ gate stop
Digital inputs / Cable length / Cable length, shielded, max.
100 m
Digital inputs / Input voltage / for signal "0"
3 to 5 V
Digital inputs / Input voltage / for signal "1"
11 to 30.2 V
Digital inputs / Input current / for signal "0", max. (permissible quiescent current)
2 mA
Digital inputs / Input current / for signal "1", typ.
9 mA
Digital inputs / Input delay (for rated value of input voltage) / for standard inputs / at "0" to "1", max.
50 µs
Digital outputs / Number of digital outputs
8
Digital outputs / Cable length, shielded, max.
600 m
Digital outputs / Cable length unshielded, max.
100 m
Digital outputs / Short-circuit protection of the output
Yes
Digital outputs / Limitation of inductive shutdown voltage to
L+ (-40 V)
Digital outputs / Output voltage / for signal "1", min.
L+ (-0,8 V)
Digital outputs / Output current / for signal "1" rated value
0.5 A
Digital outputs / Output current / for signal "0" residual current, max.
0.5 mA
Digital outputs / Output delay with resistive load / "0" to "1", max.
300 µs
Digital outputs / Switching frequency / with resistive load, max.
500 Hz
Digital outputs / Switching frequency / with inductive load, max.
0.5 Hz
Digital outputs / Aggregate current of the outputs (per group) / horizontal installation / up to 40 °C, max.
4 A
Digital outputs / Aggregate current of the outputs (per group) / horizontal installation / up to 60 °C, max.
2 A
Digital outputs / Aggregate current of the outputs (per group) / all other mounting positions / up to 40 °C, max.
Counters / Counter input 24 V / Input voltage, for signal "0"
3 to 5 V
Counters / Counter input 24 V / Input voltage, for signal "1"
11 V to 30.2 V
Counters / Counter input 24 V / Input current, for signal "0", max.. (permissible idle current)
2 mA
Counters / Counter input 24 V / Input current, for signal "1", typ.
9 mA
Counters / Counter input 24 V / Input delay, max.,
50 µs
Counter frequency, max.
20 kHz; 24 V incremental encoder: 10 kHz,; 24 V directional element: 20 kHz,; 24 V initiator: 20 kHz,; NAMUR sensor: 20 kHz
Cable length, max.
100 m
Status information/ alarms/diagnostics / Alarms / Diagnostic alarm
Yes; parameterizable
Status information/ alarms/diagnostics / Alarms / Process alarm
Yes; parameterizable
Status information/ alarms/diagnostics / Diagnoses / Diagnostic functions
Yes; Diagnostic information readable
Isolation / Isolation, digital outputs / between the channels and the backplane bus
Yes; and shielding
Isolation / Galvanic isolation, digital inputs / between the channels and the backplane bus
Yes; and shielding
Isolation / Galvanic isolation, digital inputs / between the channels and the backplane bus (NAMUR)
Yes, against backplane bus and shielding
Isolation / Isolation counter / between the channels and the backplane bus
Yes; and shielding
Dimensions and weight / Width
80 mm
Dimensions and weight / Height
125 mm
Dimensions and weight / Depth
120 mm
Weights / Weight, approx.
460 g
Connections and conditions of use
Connection point / required front connectors: 1 x 40-pin
Digital inputs / Input voltage / for signal "0": 3 to 5 V
Digital inputs / Input voltage / for signal "1": 11 to 30.2 V
Digital inputs / Input current / for signal "0", max. (permissible quiescent current): 2 mA
Digital inputs / Input current / for signal "1", typ.: 9 mA
Digital outputs / Output voltage / for signal "1", min.: L+ (-0,8 V)
Digital outputs / Output current / for signal "1" rated value: 0.5 A
Digital outputs / Output current / for signal "0" residual current, max.: 0.5 mA
Scope of supply
We will confirm the exact version, package contents and related accessories before ordering. Package information in the technical table applies to the stated order number.
Frequently asked questions
Is the same product family enough to identify a replacement?
The complete order number is essential. If the type changes, compare the electrical and mechanical design, connections and requirements of the original application.
What information is needed to check connections and accessories?
Send a nameplate photo, the designations of related modules and connectors and, where needed, a wiring diagram. We will check the specific version for your application.
Can you assess a faulty part?
Yes. Send the complete order number and a description of the fault. We will check the diagnostic and professional repair options for your specific unit.
Why buy from FOXON
1
Replacement part availability
We will check current part availability and confirm the possible delivery date before you order.
2
New original and refurbished parts
We will specify the available version and condition of the particular unit in the quotation.
3
Parts with a warranty
We will confirm the warranty period according to the part condition and specific quotation.
4
Diagnostics and repairs
For a faulty unit, we will check the options for diagnostics and professional repair.
More than 3,500customers
We deliver tomore than 100 countries
Express delivery?We will check. Contact us now.
Part conditions available for sale
Part conditions and warranty
New, sealed (NC): Brand-new, unused part in unopened original packaging. 12-month warranty.
New, opened (NO): Brand-new and unused part, but the original packaging has been opened. 12-month warranty.
New, without packaging (NW): Brand-new and unused part, supplied without original packaging. 12-month warranty.
New (N): New and unused part, typically smaller components supplied in multi-packs in one original package. 12-month warranty.
Refurbished (R): Part has been removed from service, cleaned, inspected and tested to meet original functionality and quality. 12-month warranty.
Used, tested (T): Functional used part that has passed full testing. 6-month warranty.
Used (U): Functional used part. 3-month warranty.
Sales, repairs and buyback of automation parts
We supply replacement parts for industrial automation and assess faulty units for diagnostics and repair. We also buy surplus parts. Send the exact designation and required quantity.
