20.4 VSupply voltage / permissible range, lower limit (DC)
28.8 VSupply voltage / permissible range, upper limit (DC)
Application and selection
Compare the complete order number and specifications below with the original part and machine wiring. Check the design, interfaces, supply voltage or connection method as applicable to this product.
Technical specifications
Manufacturer
Siemens
Order number
6ES7353-1AH01-0AE0
Supply voltage / Rated value (DC)
24 V
Supply voltage / permissible range, lower limit (DC)
20.4 V
Supply voltage / permissible range, upper limit (DC)
28.8 V
Input current / Current consumption, max.
300 mA
Power loss / Power loss, typ.
7 W
Digital inputs / Number of digital inputs
4; + 1 input for message signal
Digital inputs / Functions
Reference cams, flying actual value setting, flying measurement, start/stop positioning, external block change
Digital inputs / Input voltage / Rated value (DC)
24 V
Digital inputs / Input voltage / for signal "0"
-3 to +5V
Digital inputs / Input voltage / for signal "1"
+11 to +30V
Digital inputs / Input current / for signal "0", max. (permissible quiescent current)
2 mA
Digital inputs / Input current / for signal "1", typ.
6 mA; 6 to 15 mA
Digital outputs / Number of digital outputs
4
Digital outputs / Functions
Position reached: stop, axis travels forward, axis travels back, change M- function M97, change M-function M98, start enable, direct output via data record
Digital outputs / Short-circuit protection
Yes
Digital outputs / Output voltage / Rated value (DC)
24 V
Digital outputs / Output voltage / for signal "1", min.
UP -3 V
Digital outputs / Output current / for signal "1" permissible range for 0 to 55 °C, max.
0.6 A; with UPmax
Digital outputs / Output current / for signal "0" residual current, max.
2 mA
Drive interface / Signal Input / Function
"Power section ready"
Drive interface / Stepper drive / Differential output voltage, min.
2 V; RL = 100 Ohm
Drive interface / Stepper drive / Differential output voltage for signal "0", max.
1 V; Io = 20 mA
Drive interface / Stepper drive / Differential output voltage for signal "1", min.
Potential separation / Potential separation digital inputs / Potential separation digital inputs
No
Potential separation / Potential separation digital outputs / Potential separation digital outputs
No
Ambient conditions / Ambient temperature during operation / min.
0 °C
Ambient conditions / Ambient temperature during operation / max.
55 °C
Ambient conditions / Ambient temperature during storage/transportation / min.
-40 °C
Ambient conditions / Ambient temperature during storage/transportation / max.
70 °C
Connection method / required front connector
1x 20-pin
Dimensions / Width
80 mm
Dimensions / Height
125 mm
Dimensions / Depth
118 mm
Weights / Weight, approx.
500 g
Product type designation
FM 353
Connections and conditions of use
Digital inputs / Input voltage / for signal "0": -3 to +5V
Digital inputs / Input voltage / for signal "1": +11 to +30V
Digital inputs / Input current / for signal "0", max. (permissible quiescent current): 2 mA
Digital inputs / Input current / for signal "1", typ.: 6 mA; 6 to 15 mA
Digital outputs / Output voltage / for signal "1", min.: UP -3 V
Digital outputs / Output current / for signal "1" permissible range for 0 to 55 °C, max.: 0.6 A; with UPmax
Digital outputs / Output current / for signal "0" residual current, max.: 2 mA
Drive interface / Signal Input / Function: "Power section ready"
Scope of supply
We will confirm the exact version, package contents and related accessories before ordering. Package information in the technical table applies to the stated order number.
Frequently asked questions
Is the same product family enough to identify a replacement?
The complete order number is essential. If the type changes, compare the electrical and mechanical design, connections and requirements of the original application.
What information is needed to check connections and accessories?
Send a nameplate photo, the designations of related modules and connectors and, where needed, a wiring diagram. We will check the specific version for your application.
Can you assess a faulty part?
Yes. Send the complete order number and a description of the fault. We will check the diagnostic and professional repair options for your specific unit.
Why buy from FOXON
1
Replacement part availability
We will check current part availability and confirm the possible delivery date before you order.
2
New original and refurbished parts
We will specify the available version and condition of the particular unit in the quotation.
3
Parts with a warranty
We will confirm the warranty period according to the part condition and specific quotation.
4
Diagnostics and repairs
For a faulty unit, we will check the options for diagnostics and professional repair.
More than 3,500customers
We deliver tomore than 100 countries
Express delivery?We will check. Contact us now.
Part conditions available for sale
Part conditions and warranty
New, sealed (NC): Brand-new, unused part in unopened original packaging. 12-month warranty.
New, opened (NO): Brand-new and unused part, but the original packaging has been opened. 12-month warranty.
New, without packaging (NW): Brand-new and unused part, supplied without original packaging. 12-month warranty.
New (N): New and unused part, typically smaller components supplied in multi-packs in one original package. 12-month warranty.
Refurbished (R): Part has been removed from service, cleaned, inspected and tested to meet original functionality and quality. 12-month warranty.
Used, tested (T): Functional used part that has passed full testing. 6-month warranty.
Used (U): Functional used part. 3-month warranty.
Sales, repairs and buyback of automation parts
We supply replacement parts for industrial automation and assess faulty units for diagnostics and repair. We also buy surplus parts. Send the exact designation and required quantity.
