Converter EtherNet/IP Slave / HART Master - HD67906-A1
Converter EtherNet/IP Slave / HART Master - HD67906-A1
The ADFweb HD67906-A1 connects HART instruments to EtherNet/IP Slave communication. It operates as a HART Master and transfers configured digital values and commands. More
Code: HD67906-A1
The ADFweb HD67906-A1 connects HART instruments to EtherNet/IP Slave communication. It operates as a HART Master and transfers configured digital values and commands. More
Code: HD67906-A1
ADFweb HD67906-A1
EtherNet/IP Slave / HART Master
The ADFweb HD67906-A1 connects HART instruments to EtherNet/IP Slave communication. It operates as a HART Master and transfers configured digital values and commands.
We will check your selection and prepare a quotation
Send us the device models, required connection and quantity.
Converter applications
As an EtherNet/IP Slave, it transfers HART values to a supervisory EtherNet/IP Master and receives configured commands. Use it to integrate HART field instruments into PLC control.
Technical specifications HD67906-A1
| Order code | HD67906-A1 |
|---|---|
| Protocol connection | EtherNet/IP Slave / HART Master |
| HART role | HART FSK Master |
| Interfaces and ports | HART; Ethernet RJ45 |
| HART data rate | 1 200 bit/s |
| Converter power supply | 8-24 V AC / 12-35 V DC |
| Converter consumption at 24 V DC | 3.5 W |
| HART device supply connection | Separate 24 V DC connection; use according to loop wiring |
| HART load resistance | Select and connect according to the specific model diagram |
| Operating temperature | -40 °C to +85 °C |
| Mounting | 35 mm DIN rail |
| Dimensions of the supplied version | To be confirmed for the hardware version before ordering |
| Device weight | approximately 200 g |
| Configuration software | SW67906 |
| Configuration data | HART addresses and commands, variable list and data map |
For an older device, check the hardware version and connections against its label.
Communication and configuration
In SW67906, configure EtherNet/IP, data area sizes and the HART variable or command list. PLC settings must match the converter data map.
Prepare HART instrument types, addresses, supported commands and required variables. The converter supply and the supply connection for HART devices are separate connection points. Select the HART loop source, current requirements, load resistance and switch positions according to the actual installation and the specific model connection diagram.
Supply and accessories
Please provide the complete order code. If you need a power supply, connection cables or help with configuration, include them in your enquiry. We will confirm the scope of supply and required accessories for your installation in the quotation.
Documentation and software
Diagrams and hardware version
The images help identify the hardware version. When replacing an older unit, compare its label, connectors and dimensions; we will confirm the version to be supplied in the quotation.
Frequently asked questions
Is knowing the two protocols enough?
The device roles, physical interfaces and data to be transferred must also be checked. Prepare HART instrument types, addresses, supported commands and required variables. The converter supply and the supply connection for HART devices are separate connection points. Select the HART loop source, current requirements, load resistance and switch positions according to the actual installation and the specific model connection diagram.
How is this converter configured?
In SW67906, configure EtherNet/IP, data area sizes and the HART variable or command list. PLC settings must match the converter data map.
What information should I send to check the selection?
Send the exact device models at both ends, the protocols and communication roles, the number of devices and the required values. For a PLC, include the firmware and method of accessing its data.
FOXON support with selection and ordering
Selection based on your devices
We will review the specific connection, communication roles and required data.
Availability check
Before you place an order, we will confirm current availability and the possible delivery date.
Documentation for the exact order code
We select the documentation and configuration tool using the complete order code.
Accessories for your installation
We will include the requested accessories in the quotation to suit the connection arrangement.
Choosing the correct version
Two devices with the same protocols can have different functions. Check the gateway role on each side, the connectors and the complete order code.
Prepare HART instrument types, addresses, supported commands and required variables. The converter supply and the supply connection for HART devices are separate connection points. Select the HART loop source, current requirements, load resistance and switch positions according to the actual installation and the specific model connection diagram.
Converter enquiry HD67906-A1
Provide the order code, quantity and the devices you need to connect. We will check the suitable version and prepare a quotation.
Request the converterTechnical specifications HD67906-A1
| Order code | HD67906-A1 |
|---|---|
| Protocol connection | EtherNet/IP Slave / HART Master |
| HART role | HART FSK Master |
| Interfaces and ports | HART; Ethernet RJ45 |
| HART data rate | 1 200 bit/s |
| Converter power supply | 8-24 V AC / 12-35 V DC |
| Converter consumption at 24 V DC | 3.5 W |
| HART device supply connection | Separate 24 V DC connection; use according to loop wiring |
| HART load resistance | Select and connect according to the specific model diagram |
| Operating temperature | -40 °C to +85 °C |
| Mounting | 35 mm DIN rail |
| Dimensions of the supplied version | To be confirmed for the hardware version before ordering |
| Device weight | approximately 200 g |
| Configuration software | SW67906 |
| Configuration data | HART addresses and commands, variable list and data map |
For an older device, check the hardware version and connections against its label.