Ethernet IO remote digital inputs outputs 230V: 1xDI, 1xDO relay, Modbus TCP, REST, MQTT, OPC UA
Industrial module for remote control and monitoring of digital signals 1x DI 230V a 1x DO 230V via TCP/IP Ethernet, OPC UA, Modbus TCP, MQTT, REST or Web server. Alarm system with email notification, automatic control of outputs according to input, power supply 230 VAC, DIN mounting. More
Code: 57732
Industrial module for remote control and monitoring of digital signals 1x DI 230V a 1x DO 230V via TCP/IP Ethernet, OPC UA, Modbus TCP, MQTT, REST or Web server. Alarm system with email notification, automatic control of outputs according to input, power supply 230 VAC, DIN mounting. More
Code: 57732
Monitoring and switching of 230 V signals via Ethernet
The W&T 57732 connects a 230 V digital input and a relay output to a 10/100BaseT Ethernet network. It enables monitoring and control via a web interface, as well as integration using OPC UA, MQTT, REST or Modbus TCP.
Do you need to select or order W&T 57732?
Please send us the required quantity and a description of the wiring configuration. We will check availability and suitable accessories.
Usage
The module is used for collecting status signals, fault reporting and remote control within industrial or technical infrastructure. Statuses can be displayed in a browser, transferred to a visualisation system or used in pre-defined actions.
Technical specifications for W&T 57732
| Digital output | 1 x potential-free contact, max. 16 A |
|---|---|
| Digital input | 1 x digital input, Max. input voltage 250 V AC Switching threshold 80 V Integrated 32-bit event counter |
| Network interface | Automatic 10/100BaseT detection |
| Power supply | 230 V AC (approximately 15 mA at 230 V) |
| Galvanic isolation | Digital output – network: min. 1000 V Digital input – network: min. 2000 V Digital input – output: min. 1000 V |
| Connectors and terminal blocks | 1 x 6-way screw-type terminal block for power supply and inputs/outputs 1 x RJ45 for network connection |
| Signalling | Status LEDs for the network 2 LEDs for digital status indicators |
| Protocols and services | HTTP and HTTPS TCP and UDP sockets, client and server MQTT – Publishing and Subscribing REST SNMP V1, V2, V3, including traps Sending emails via the SMTP protocol OPC server Modbus TCP Inventory and device group management |
| Response times | Data and switching operation: typically 12 ms |
| Housing and mounting | Plastic housing for DIN rail mounting 90 × 45 × 56 mm (d × w × h) |
| Degree of protection | IP20 |
| Weight | approx. 140 g |
| Storage temperature | -25 to +70 °C |
| Operating temperature | 0 to +40 °C |
| Permissible relative humidity | 5 to 95 per cent RH, non-condensing |
| Contents of the delivery | 1 x Web-IO 4.0 Digital, 1 x 230 V input, 1 x relay output 1× quick start guide Additional accessories must be ordered separately |
Signals, communication and events
- The input is designed for an AC mains signal with a maximum voltage of 250 V AC and a switching threshold of 80 V. The potential-free relay contact switches a current of up to 16 A; load parameters must be assessed according to the circuit configuration.
- The web interface supports HTTP/HTTPS. OPC UA, MQTT Publish/Subscribe, REST and Modbus TCP are available for integration; individual services and the necessary permissions are configured on the device.
- Up to 30 actions can be configured, such as an email, an SNMP trap, an output switch or an HTTP request. SNMP supports versions V1, V2 and V3.
- Box-to-Box mode transfers switching states between suitably configured Web-IO devices over the network. Correct mapping of inputs and outputs is part of the configuration.
- The inputs support 32-bit event counters. The parameters for input voltage, switching threshold and current consumption are governed by the table for this model.
Commissioning and accessories
230 V equipment and network circuits must be connected by a person with the appropriate electrical engineering qualifications. Check the type of connection, fuse protection and load characteristics. Once the power supply has been connected, set the IP address, access rights and the required protocol.
Contents of the delivery
- 1 x Web-IO 4.0 Digital, 1 x 230 V input, 1 x relay output
- 1× quick start guide
- Additional accessories must be ordered separately
Frequently Asked Questions
How many physical channels does this model have?
The input is designed for an AC mains signal with a maximum voltage of 250 V AC and a switching threshold of 80 V. The potential-free relay contact switches a current of up to 16 A; load parameters must be assessed according to the circuit configuration.
Do I need a special programme to operate it?
A web interface is available for basic monitoring and control. A supported protocol and its access rights are configured for the host system.
Does ‘Box-to-Box’ refer to a fixed response time?
No. The typical response times shown in the table do not guarantee the overall response of the entire network. The result also depends on network communication and the configuration of both devices.
Why order from FOXON?
Before placing an order, we will check the current availability of the part and confirm the estimated delivery date. We will assist you in selecting the equipment and necessary accessories based on the wiring configuration and required communication. We will confirm the warranty terms and the scope of any diagnostics or repairs for the specific quotation.
Documentation and technical consultancy
Technical data and documentation W&T 57732
Manuals, firmware and tools for this model can also be found in the Downloads tab. For service enquiries, please use sale and repair of FOXON industrial parts.
Do you need to select or order W&T 57732?
Please send us the required quantity and a description of the wiring configuration. We will check availability and suitable accessories.
Diagrams and illustrations
Further related links
Technical specifications for W&T 57732
| Digital output | 1 x potential-free contact, max. 16 A |
|---|---|
| Digital input | 1 x digital input, Max. input voltage 250 V AC Switching threshold 80 V Integrated 32-bit event counter |
| Network interface | Automatic 10/100BaseT detection |
| Power supply | 230 V AC (approximately 15 mA at 230 V) |
| Galvanic isolation | Digital output – network: min. 1000 V Digital input – network: min. 2000 V Digital input – output: min. 1000 V |
| Connectors and terminal blocks | 1 x 6-way screw-type terminal block for power supply and inputs/outputs 1 x RJ45 for network connection |
| Signalling | Status LEDs for the network 2 LEDs for digital status indicators |
| Protocols and services | HTTP and HTTPS TCP and UDP sockets, client and server MQTT – Publishing and Subscribing REST SNMP V1, V2, V3, including traps Sending emails via the SMTP protocol OPC server Modbus TCP Inventory and device group management |
| Response times | Data and switching operation: typically 12 ms |
| Housing and mounting | Plastic housing for DIN rail mounting 90 × 45 × 56 mm (d × w × h) |
| Degree of protection | IP20 |
| Weight | approx. 140 g |
| Storage temperature | -25 to +70 °C |
| Operating temperature | 0 to +40 °C |
| Permissible relative humidity | 5 to 95 per cent RH, non-condensing |
| Contents of the delivery | 1 x Web-IO 4.0 Digital, 1 x 230 V input, 1 x relay output 1× quick start guide Additional accessories must be ordered separately |
VIDEO: Easily Collect Machine Data via OPC UA & MQTT
At the beginning of 2024 we introduced a new product from the German manufacturer of industrial modules W&T to the Czech market. Check out our short videos to see how easy it is to set up and use W&T sensors and digital and analogue inputs and outputs for data acquisition using OPC UA and MQTT communications.
Highlighted items are mandatory.
96 W 24 VDC / 4 A Bicker UPS backup power supply, supercapacitor
307,34 EUR Incl. VAT
144 W 24 VDC / 6 A UPS backup power supply Bicker, LiFePO4 battery
398,09 EUR Incl. VAT
TOP 30 OPC UA and OT/IT Data converters in a Single OPC Router License
2 407,90 EUR Incl. VAT
Accessories3
96 W 24 VDC / 4 A Bicker UPS backup power supply, supercapacitor
307,34 EUR Incl. VAT
144 W 24 VDC / 6 A UPS backup power supply Bicker, LiFePO4 battery
398,09 EUR Incl. VAT
TOP 30 OPC UA and OT/IT Data converters in a Single OPC Router License
2 407,90 EUR Incl. VAT