Industrial TRIO power supply, single-phase, 12 V DC, 10 A, 120 W

Industrial TRIO power supply, single-phase, 12 V DC, 10 A, 120 W


PHOENIX CONTACT

Single-phase PHOENIX CONTACT TRIO POWER switching power supply, 12 V DC / 10 A / 120 W. Input 85 to 264 V AC, DIN rail mounting, screw terminals and IP20. Width 40 mm. More

Code: 2866488

162 EUR excl. VAT (196,02 EUR Incl. VAT)
In stock
pcs
(2 pcs In stock)

Rezervace termínu

Get a quote
PHOENIX CONTACT

Single-phase PHOENIX CONTACT TRIO POWER switching power supply, 12 V DC / 10 A / 120 W. Input 85 to 264 V AC, DIN rail mounting, screw terminals and IP20. Width 40 mm. More

Code: 2866488

PHOENIX CONTACT · TRIO POWER

2866488 - TRIO-PS/1AC/12DC/10

PHOENIX CONTACT TRIO-PS/1AC/12DC/10 is a single-phase switching power supply with a 12 V DC output, 10 A current and 120 W power. Output voltage is adjustable from 10 to 18 V DC. Its metal housing, screw terminals and 40 mm width suit industrial control cabinets.

Replacement power supply or repair
Send the part number and power requirements. We will check a suitable replacement and options for diagnosing and repairing a faulty unit.

Request a purchase or repair quote
12 V DC / 10 AOutput power: 120 W
10 to 18 V DCOutput voltage adjustment
Metal housingIP20 · 40 mm wide

Power supply applications

TRIO supplies devices and machine components requiring 12 V DC. Output adjustment helps match the load voltage or compensate for cable voltage drop. Above 12 V, current is limited by constant power; increasing the voltage does not permit a 10 A load throughout the adjustment range.

Technical specifications

ManufacturerPHOENIX CONTACT
Part number / type2866488 / TRIO-PS/1AC/12DC/10
Rated input, number of phases100 to 240 V AC; 1 phase
Input voltage range85 to 264 V AC
Input frequency45 to 65 Hz
Rated output voltage12 V DC ±1 %
Output voltage adjustment10 to 18 V DC; constant-power limitation above 12 V
Rated output current10 A at -25 to +55 °C
Output power120 W
Efficiency>86 % at 230 V AC and nominal values
Residual ripple<20 mV peak-to-peak
Mains buffering time>20 ms at 120 V AC; >86 ms at 230 V AC
Input current consumption1.7 A at 120 V AC; 0.9 A at 230 V AC
Inrush current<15 A
Power factor0.63
No-load losses1.1 W
Losses at rated load18 W
Short circuit and overloadU/I characteristic; short-circuit current limited to approximately 12 A
Output overvoltage protection<25 V DC
SignallingGreen DC OK LED; flashes at output <0.9 × rated voltage
Operating temperature-25 to +70 °C
Load deratingAbove +55 °C: 2.5 %/K
Storage / transport-40 to +85 °C
Operating humidity≤95 % at 25 °C, non-condensing
Degree of protection / protection classIP20 / I with PE connection
HousingMetal; zinc-plated sheet steel and aluminium
Dimensions (W × H × D)40 × 130 × 115 mm
Weight without / with packaging600 g / 780.5 g
MountingHorizontal NS 35 DIN rail, EN 60715
Clearance above / below the unit50 mm / 50 mm
Connection and conductor cross-sectionScrew terminals; solid and flexible conductors 0.2 to 2.5 mm²
Stripping length / thread9 mm / M2.5
Tightening torque, input / output0.4 to 0.5 Nm / 0.4 to 0.5 Nm
EAN / GTIN4046356287807

Protection, signalling and installation

The U/I output characteristic limits current to approximately 12 A during overload or short circuit and reduces voltage. The green DC OK LED indicates output status and flashes below 0.9 times the rated voltage. Load derating is required below an input of 90 V AC.

Above +55 °C, reduce the load by 2.5 % for each additional 1 K. The range up to +70 °C does not mean that full rated current is available throughout the temperature range.

Mount the unit on a horizontal DIN rail and connect the protective earth conductor PE. Leave 50 mm above and below for cooling. The metal housing is rated IP20; install it in a suitable cabinet with unobstructed airflow.

Scope of delivery

TRIO-PS/1AC/12DC/10 (2866488). Power supply in the stated version. Select the DIN rail, wiring and associated protection separately to suit the installation. We will confirm accessories and the exact scope of delivery in the quotation.

Frequently asked questions

Can it deliver 10 A when set to 18 V?

No. Above the rated 12 V, the constant-power limit of 120 W applies. Current must be reduced accordingly as voltage is increased.

Does it deliver full power at +70 °C?

No. Full rated current applies up to +55 °C. Above this temperature, reduce the load by 2.5 % for each additional 1 K and maintain the specified installation clearances.

Does it provide backup during a mains failure?

The millisecond buffering time covers a brief input interruption. Longer battery-powered operation requires a separate backup system or UPS.

Can several power supplies be connected in parallel?

Yes, when wired according to the manufacturer instructions. For redundant supply, use suitable output decoupling or a redundancy module. Use matching types and observe current-sharing requirements; connecting the outputs alone does not ensure redundancy.

How do I check a replacement for the original power supply?

Compare load voltage and current, input supply, dimensions, terminal positions and protective earth requirements. When changing the type, check the wiring and operating conditions of the complete supply circuit.

Can I request diagnosis or repair?

Yes. Send a photo of the nameplate, a description of the fault and the conditions in which it occurs. We will check diagnosis and repair options as well as a suitable replacement.

Available product conditions

The product is offered as a new power supply. When selecting a replacement, always compare the full part number, output voltage and current, available installation space and terminal arrangement.

Sales, repairs and purchase of surplus automation parts

FOXON supplies industrial automation parts and assesses diagnosis and repair options for faulty parts. For each power supply, we first determine the appropriate approach.

More about FOXON parts and repairs

Documentation and connections

The technical data sheet covers wiring, installation, operating characteristics and recommendations for parallel operation. Installation and wiring must be carried out by a qualified electrician.

Data sheet and installation instructions (EN, PDF)

Phoenix Contact product and further documentation

Request a power supply quote 2866488

State the quantity, required delivery date and load parameters. For diagnosis or repair enquiries, include a photo of the nameplate and a description of the fault.

Request a purchase or repair quote
ManufacturerPHOENIX CONTACT
Part number / type2866488 / TRIO-PS/1AC/12DC/10
Rated input, number of phases100 to 240 V AC; 1 phase
Input voltage range85 to 264 V AC
Input frequency45 to 65 Hz
Rated output voltage12 V DC ±1 %
Output voltage adjustment10 to 18 V DC; constant-power limitation above 12 V
Rated output current10 A at -25 to +55 °C
Output power120 W
Efficiency>86 % at 230 V AC and nominal values
Residual ripple<20 mV peak-to-peak
Mains buffering time>20 ms at 120 V AC; >86 ms at 230 V AC
Input current consumption1.7 A at 120 V AC; 0.9 A at 230 V AC
Inrush current<15 A
Power factor0.63
No-load losses1.1 W
Losses at rated load18 W
Short circuit and overloadU/I characteristic; short-circuit current limited to approximately 12 A
Output overvoltage protection<25 V DC
SignallingGreen DC OK LED; flashes at output <0.9 × rated voltage
Operating temperature-25 to +70 °C
Load deratingAbove +55 °C: 2.5 %/K
Storage / transport-40 to +85 °C
Operating humidity≤95 % at 25 °C, non-condensing
Degree of protection / protection classIP20 / I with PE connection
HousingMetal; zinc-plated sheet steel and aluminium
Dimensions (W × H × D)40 × 130 × 115 mm
Weight without / with packaging600 g / 780.5 g
MountingHorizontal NS 35 DIN rail, EN 60715
Clearance above / below the unit50 mm / 50 mm
Connection and conductor cross-sectionScrew terminals; solid and flexible conductors 0.2 to 2.5 mm²
Stripping length / thread9 mm / M2.5
Tightening torque, input / output0.4 to 0.5 Nm / 0.4 to 0.5 Nm
EAN / GTIN4046356287807