Converter Modbus RTU Slave RS485 / SNMP Manager - HD67175-485-A1
Converter Modbus RTU Slave RS485 / SNMP Manager - HD67175-485-A1
The ADFweb HD67175-485-A1 connects Modbus RTU Slave RS485 and SNMP Manager communication. It transfers configured values between an industrial system and network supervision according to a prepared data map. More
Code: HD67175-485-A1
The ADFweb HD67175-485-A1 connects Modbus RTU Slave RS485 and SNMP Manager communication. It transfers configured values between an industrial system and network supervision according to a prepared data map. More
Code: HD67175-485-A1
ADFweb HD67175-485-A1
Modbus RTU Slave RS485 / SNMP Manager
The ADFweb HD67175-485-A1 connects Modbus RTU Slave RS485 and SNMP Manager communication. It transfers configured values between an industrial system and network supervision according to a prepared data map.
We will check your selection and prepare a quotation
Send us the device models, required connection and quantity.
Converter applications
Transfer data from SNMP agents to a serial Modbus RTU RS485 line. A supervisory Modbus RTU Master reads and writes the converter configured registers.
Technical specifications HD67175-485-A1
| Order code | HD67175-485-A1 |
|---|---|
| Protocol connection | Modbus RTU Slave RS485 / SNMP Manager |
| SNMP role | SNMP Manager |
| Interfaces | RS485; Ethernet RJ45 for SNMP and configuration |
| SNMP versions | SNMPv1, SNMPv2, SNMPv3 |
| Data capacity | 2000 bytes for reading and the same number for writing |
| Modbus RTU data rate | up to 115 200 bit/s |
| Converter power supply | 8-24 V AC / 12-35 V DC |
| Consumption at 24 V DC | 3.5 W |
| Operating temperature | -40 °C to +85 °C |
| Mounting | 35 mm DIN rail |
| Dimensions of the supplied version | To be confirmed for the hardware version before ordering |
| Device weight | approximately 200 g |
| Configuration software | SW67175 |
For an older device, check the hardware version and connections against its label.
Communication and configuration
Use SW67175 to prepare the converter configuration. Select the RS485 variant and configure the baud rate, parity and Modbus Slave address. Define SNMP requests and their register mapping. RS485 wiring and termination must match the actual line.
Prepare exact device types, required SNMP OIDs, data types and read/write permissions. Availability of specific values depends on the connected device MIB and access rights. SNMP support alone does not guarantee access to all device functions.
Supply and accessories
Please provide the complete order code. If you need a power supply, connection cables or help with configuration, include them in your enquiry. We will confirm the scope of supply and required accessories for your installation in the quotation.
Documentation and software
Diagrams and hardware version
The images help identify the hardware version. When replacing an older unit, compare its label, connectors and dimensions; we will confirm the version to be supplied in the quotation.
Frequently asked questions
Is knowing the two protocols enough?
The device roles, physical interfaces and data to be transferred must also be checked. Prepare exact device types, required SNMP OIDs, data types and read/write permissions. Availability of specific values depends on the connected device MIB and access rights. SNMP support alone does not guarantee access to all device functions.
How is this converter configured?
Use SW67175 to prepare the converter configuration. Select the RS485 variant and configure the baud rate, parity and Modbus Slave address. Define SNMP requests and their register mapping. RS485 wiring and termination must match the actual line.
What information should I send to check the selection?
Send the exact device models at both ends, the protocols and communication roles, the number of devices and the required values. For a PLC, include the firmware and method of accessing its data.
FOXON support with selection and ordering
Selection based on your devices
We will review the specific connection, communication roles and required data.
Availability check
Before you place an order, we will confirm current availability and the possible delivery date.
Documentation for the exact order code
We select the documentation and configuration tool using the complete order code.
Accessories for your installation
We will include the requested accessories in the quotation to suit the connection arrangement.
Choosing the correct version
Two devices with the same protocols can have different functions. Check the gateway role on each side, the connectors and the complete order code.
Prepare exact device types, required SNMP OIDs, data types and read/write permissions. Availability of specific values depends on the connected device MIB and access rights. SNMP support alone does not guarantee access to all device functions.
Converter enquiry HD67175-485-A1
Provide the order code, quantity and the devices you need to connect. We will check the suitable version and prepare a quotation.
Request the converterTechnical specifications HD67175-485-A1
| Order code | HD67175-485-A1 |
|---|---|
| Protocol connection | Modbus RTU Slave RS485 / SNMP Manager |
| SNMP role | SNMP Manager |
| Interfaces | RS485; Ethernet RJ45 for SNMP and configuration |
| SNMP versions | SNMPv1, SNMPv2, SNMPv3 |
| Data capacity | 2000 bytes for reading and the same number for writing |
| Modbus RTU data rate | up to 115 200 bit/s |
| Converter power supply | 8-24 V AC / 12-35 V DC |
| Consumption at 24 V DC | 3.5 W |
| Operating temperature | -40 °C to +85 °C |
| Mounting | 35 mm DIN rail |
| Dimensions of the supplied version | To be confirmed for the hardware version before ordering |
| Device weight | approximately 200 g |
| Configuration software | SW67175 |
For an older device, check the hardware version and connections against its label.