Converter EtherNet/IP Master / Modbus RTU Slave RS485 - HD67669-485-A1
Converter EtherNet/IP Master / Modbus RTU Slave RS485 - HD67669-485-A1
The ADFweb HD67669-485-A1 is an industrial EtherNet/IP Master / Modbus RTU Slave RS485 converter. It connects both communication sides through a configured data map. More
Code: HD67669-485-A1
The ADFweb HD67669-485-A1 is an industrial EtherNet/IP Master / Modbus RTU Slave RS485 converter. It connects both communication sides through a configured data map. More
Code: HD67669-485-A1
ADFweb HD67669-485-A1
EtherNet/IP Master / Modbus RTU Slave RS485
The ADFweb HD67669-485-A1 is an industrial EtherNet/IP Master / Modbus RTU Slave RS485 converter. It connects both communication sides through a configured data map.
We will check your selection and prepare a quotation
Send us the device models, required connection and quantity.
Converter applications
Connect EtherNet/IP Slave devices to a supervisory Modbus RTU Master system over RS485. Data from the managed devices is available in the converter Modbus Slave registers.
Technical specifications HD67669-485-A1
| Order code | HD67669-485-A1 |
|---|---|
| Protocol connection | EtherNet/IP Master / Modbus RTU Slave RS485 |
| Converter roles | EtherNet/IP Master; Modbus RTU Slave RS485 |
| Interfaces | RS485; Ethernet RJ45 |
| Converter power supply | 8-24 V AC / 12-35 V DC |
| Consumption at 24 V DC | 3.5 W |
| Operating temperature | -40 °C to +85 °C |
| Mounting | 35 mm DIN rail |
| Dimensions of the supplied version | To be confirmed for the hardware version before ordering |
| Device weight | approximately 200 g |
| Configuration software | SW67669 |
For an older device, check the hardware version and connections against its label.
Communication and configuration
Prepare the configuration in SW67669. Configure connected EtherNet/IP device addresses, their data areas and mappings to the second communication side. On RS485, configure the Modbus Slave address, baud rate and parity, and agree the data map with the supervisory Master.
Prepare exact EtherNet/IP device models, their IP addresses and descriptions of input/output data. The converter operates as an EtherNet/IP Master and accesses configured subordinate devices. We will confirm data sizes, access parameters and timing requirements for the actual installation.
Supply and accessories
Please provide the complete order code. If you need a power supply, connection cables or help with configuration, include them in your enquiry. We will confirm the scope of supply and required accessories for your installation in the quotation.
Documentation and software
Diagrams and hardware version
The images help identify the hardware version. When replacing an older unit, compare its label, connectors and dimensions; we will confirm the version to be supplied in the quotation.
Frequently asked questions
Is knowing the two protocols enough?
The device roles, physical interfaces and data to be transferred must also be checked. Prepare exact EtherNet/IP device models, their IP addresses and descriptions of input/output data. The converter operates as an EtherNet/IP Master and accesses configured subordinate devices. We will confirm data sizes, access parameters and timing requirements for the actual installation.
How is this converter configured?
Prepare the configuration in SW67669. Configure connected EtherNet/IP device addresses, their data areas and mappings to the second communication side. On RS485, configure the Modbus Slave address, baud rate and parity, and agree the data map with the supervisory Master.
What information should I send to check the selection?
Send the exact device models at both ends, the protocols and communication roles, the number of devices and the required values. For a PLC, include the firmware and method of accessing its data.
FOXON support with selection and ordering
Selection based on your devices
We will review the specific connection, communication roles and required data.
Availability check
Before you place an order, we will confirm current availability and the possible delivery date.
Documentation for the exact order code
We select the documentation and configuration tool using the complete order code.
Accessories for your installation
We will include the requested accessories in the quotation to suit the connection arrangement.
Choosing the correct version
Two devices with the same protocols can have different functions. Check the gateway role on each side, the connectors and the complete order code.
Prepare exact EtherNet/IP device models, their IP addresses and descriptions of input/output data. The converter operates as an EtherNet/IP Master and accesses configured subordinate devices. We will confirm data sizes, access parameters and timing requirements for the actual installation.
Converter enquiry HD67669-485-A1
Provide the order code, quantity and the devices you need to connect. We will check the suitable version and prepare a quotation.
Request the converterTechnical specifications HD67669-485-A1
| Order code | HD67669-485-A1 |
|---|---|
| Protocol connection | EtherNet/IP Master / Modbus RTU Slave RS485 |
| Converter roles | EtherNet/IP Master; Modbus RTU Slave RS485 |
| Interfaces | RS485; Ethernet RJ45 |
| Converter power supply | 8-24 V AC / 12-35 V DC |
| Consumption at 24 V DC | 3.5 W |
| Operating temperature | -40 °C to +85 °C |
| Mounting | 35 mm DIN rail |
| Dimensions of the supplied version | To be confirmed for the hardware version before ordering |
| Device weight | approximately 200 g |
| Configuration software | SW67669 |
For an older device, check the hardware version and connections against its label.