from 94,38 EUR Incl. VAT
- PROFINET, PROFIBUS...
- PROFIBUS
- Cables PROFIBUS
- SIEMENS 6GK1905-6AA00 - PROFIBUS FastConnect stripping tool
SIEMENS 6GK1905-6AA00 - PROFIBUS FastConnect stripping tool
SIEMENS 6GK1905-6AA00 - manual, pre-set tool for preparing PROFIBUS FastConnect cables. Stripping length depends on the connector; interchangeable blade cartridges 6GK1905-6AB00. More
Code: 6GK1905-6AA00
SIEMENS 6GK1905-6AA00 - manual, pre-set tool for preparing PROFIBUS FastConnect cables. Stripping length depends on the connector; interchangeable blade cartridges 6GK1905-6AB00. More
Code: 6GK1905-6AA00
Part Sales 2
| Condition | Code | Warranty | Availability |
Delivery Express? | Price excl. VAT | |
|---|---|---|---|---|---|---|
| New in sealed box (NC) | 6GK1905-6AA00 NC | 12/24 months | In stock FOXON 6 pcs |
78 EUR
|
||
| New in sealed box (N) | 6GK1905-6AA00 N | 12/24 months | In stock FOXON 6 pcs |
78 EUR
|
PROFIBUS FastConnect Stripping Tool
Preparing the cable for connector fitting
The SIEMENS 6GK1905-6AA00 PB FastConnect Stripping Tool is a pre-set manual tool for the rapid preparation of PROFIBUS FastConnect cables. It helps to consistently prepare the cable end according to the type of connector being fitted and minimises unnecessary damage to the shielding during manual cutting.
Please let us know the type of cable and connector. We will check the appropriate preparation procedure and accessories.
Use during the installation and maintenance of the network
You can use this tool when installing new networks and when replacing connectors in existing cabling. Select the cutting length according to the specific connector and its installation instructions. The correct cutting setting also depends on the cable’s construction.
Compatibility with FastConnect cables
This tool is designed for PROFIBUS FastConnect cables. The FastConnect design has been confirmed for the standard Siemens 6XV1830-0EU10 cable. The LAPP 2170222 is not a FastConnect cable; therefore, the 8 mm diameter alone does not confirm its suitability for this tool. For other cables, first check their construction and the approved method of stripping.

Preparing the cable for a specific connector
Select the correct length for the connector in question, insert the cable and follow the installation instructions. After stripping the insulation, check that the conductors are undamaged, that the shielding is the correct length and that the cut is clean. Cut off any damaged end and prepare it again; do not insert it into the connector.
When connecting, ensure that the stripped lengths and connection method comply with the specifications for the selected connector. In a standard PROFIBUS DP connection, A is the green wire and B is the red wire. The shield must make proper contact with the connector or the designated shielding element. After installation, check the wiring and network communication.
Blade cartridge and cut control
If the cut is uneven or the tool is damaging the cable, check the condition of the blade cartridge and ensure the correct cable has been selected. Replacement cartridges for this tool have the order number 6GK1905-6AB00; the manufacturer’s pack contains 5 cartridges. The tool and replacement cartridges are sold separately.
Technical specifications for 6GK1905-6AA00
| Manufacturer | SIEMENS |
|---|---|
| Order number | 6GK1905-6AA00 |
| Series | SIMATIC NET / PROFIBUS FastConnect |
| Model designation | PB FastConnect Stripping Tool |
| Purpose | Stripping and preparing PROFIBUS FastConnect cables |
| Design | Manual, preset |
| Selecting the length | Depending on the type of connector and its fitting instructions |
| Replacement blade cartridges | 6GK1905-6AB00 |
| Pack of replacement cartridges | 5 items, separate item |
| Net catalogue weight | 65 g |
| Sales unit | Piece |
| Scope of supply | We will confirm the tool and accessories in accordance with the quotation and the specific variant |
Tool and related accessories
We will supply the 6GK1905-6AA00 stripping tool in the selected variant from those on offer. We will confirm the specific condition, packaging and included accessories in the quotation. We select the cable, connectors and replacement cartridges as separate items.
Selection and correct use
What sort of cables is the tool designed for?
This tool is designed for PROFIBUS FastConnect cables. The FastConnect design has been confirmed for the standard Siemens 6XV1830-0EU10 cable. The LAPP 2170222 is not a FastConnect cable; therefore, the 8 mm diameter alone does not confirm its suitability for this tool. For other cables, first check their construction and the approved method of stripping.
Can it be used to prepare LAPP 2170222?
This tool is designed for PROFIBUS FastConnect cables. The FastConnect design has been confirmed for the standard Siemens 6XV1830-0EU10 cable. The LAPP 2170222 is not a FastConnect cable; therefore, the 8 mm diameter alone does not confirm its suitability for this tool. For other cables, first check their construction and the approved method of stripping.
How do you choose the length of the stripped section?
Select the correct length for the connector in question, insert the cable and follow the installation instructions. After stripping the insulation, check that the conductors are undamaged, that the shielding is the correct length and that the cut is clean. Cut off any damaged end and prepare it again; do not insert it into the connector.
Is the preparation length the same for all connectors?
No. Connectors differ in design and required cable preparation length. Use the length marking and procedure specified for the particular connector. Do not choose the length solely from the cable diameter.
Can worn blades be replaced?
If the cut is uneven or the tool is damaging the cable, check the condition of the blade cartridge and ensure the correct cable has been selected. Replacement cartridges for this tool have the order number 6GK1905-6AB00; the manufacturer’s pack contains 5 cartridges. The tool and replacement cartridges are sold separately.
Why order from FOXON
We can help you select the cabling and accessories to suit your specific PROFIBUS installation. Please send us a layout diagram, a list of device designations and a description of the environment.
Selection for a specific route
We will review the cable routing, movement, temperature and requirements of the installation.
Cable and connectors
We will check the compatibility of the conductors, the shielding, the dimensions and the method of installation.
Preparing the cabling
We’ll help you choose the right tool and procedure for your specific connector.
PROFIBUS Diagnostics
We can help with signal measurement, termination and identifying the causes of communication failures.
Czech technical support
We will discuss the topology, environment and cable replacement procedure with regard to the machine operating conditions.
Delivery Confirmation
Before placing an order, we will confirm the specifications, quantity and delivery date.
Technical data sheets and installation documentation
In the ‘Downloads’ tab, you will find the current technical data sheet for the exact order number 6GK1905-6AA00. Technical data sheets are available in EN, DE and ES, along with the PROFIBUS connector handbook and the Siemens cabling selection guide.
Open downloadsTechnical specifications 6GK1905-6AA00
PB FastConnect Stripping Tool
Identification and use
| Manufacturer | SIEMENS |
|---|---|
| Order number | 6GK1905-6AA00 |
| Series | SIMATIC NET / PROFIBUS FastConnect |
| Model designation | PB FastConnect Stripping Tool |
| Purpose | Stripping and preparing PROFIBUS FastConnect cables |
| Design | Manual, preset |
| Selecting the length | Depending on the type of connector and its fitting instructions |
Accessories and contents of the pack
| Replacement blade cartridges | 6GK1905-6AB00 |
|---|---|
| Pack of replacement cartridges | 5 items, separate item |
| Net catalogue weight | 65 g |
| Sales unit | Piece |
| Scope of supply | We will confirm the tool and accessories in accordance with the quotation and the specific variant |
Compatibility and preparation
This tool is designed for PROFIBUS FastConnect cables. The FastConnect design has been confirmed for the standard Siemens 6XV1830-0EU10 cable. The LAPP 2170222 is not a FastConnect cable; therefore, the 8 mm diameter alone does not confirm its suitability for this tool. For other cables, first check their construction and the approved method of stripping.
Select the correct length for the connector in question, insert the cable and follow the installation instructions. After stripping the insulation, check that the conductors are undamaged, that the shielding is the correct length and that the cut is clean. Cut off any damaged end and prepare it again; do not insert it into the connector.
Use and delivery
If the cut is uneven or the tool is damaging the cable, check the condition of the blade cartridge and ensure the correct cable has been selected. Replacement cartridges for this tool have the order number 6GK1905-6AB00; the manufacturer’s pack contains 5 cartridges. The tool and replacement cartridges are sold separately.
We will confirm the scope of delivery and accessories based on the selected option.
Choosing the right model
What sort of cables is the tool designed for?
This tool is designed for PROFIBUS FastConnect cables. The FastConnect design has been confirmed for the standard Siemens 6XV1830-0EU10 cable. The LAPP 2170222 is not a FastConnect cable; therefore, the 8 mm diameter alone does not confirm its suitability for this tool. For other cables, first check their construction and the approved method of stripping.
Can it be used to prepare LAPP 2170222?
This tool is designed for PROFIBUS FastConnect cables. The FastConnect design has been confirmed for the standard Siemens 6XV1830-0EU10 cable. The LAPP 2170222 is not a FastConnect cable; therefore, the 8 mm diameter alone does not confirm its suitability for this tool. For other cables, first check their construction and the approved method of stripping.
How do you choose the length of the stripped section?
Select the correct length for the connector in question, insert the cable and follow the installation instructions. After stripping the insulation, check that the conductors are undamaged, that the shielding is the correct length and that the cut is clean. Cut off any damaged end and prepare it again; do not insert it into the connector.
Installation and use
Is the preparation length the same for all connectors?
No. Connectors differ in design and required cable preparation length. Use the length marking and procedure specified for the particular connector. Do not choose the length solely from the cable diameter.
Can worn blades be replaced?
If the cut is uneven or the tool is damaging the cable, check the condition of the blade cartridge and ensure the correct cable has been selected. Replacement cartridges for this tool have the order number 6GK1905-6AB00; the manufacturer’s pack contains 5 cartridges. The tool and replacement cartridges are sold separately.
Does the pack contain 5 complete instruments?
No. 6GK1905-6AA00 refers to a stripping tool. The pack of 5 refers to a separate item: the 6GK1905-6AB00 replacement blade cartridges.
Will the tool prepare the cable without any further checks?
No. After each stripping operation, check the conductors, the shielding and the length of the stripped section. The tool speeds up the work, but it is no substitute for checking the assembled connector and measuring the finished cable assembly.
Operations and technical consultancy
Is it also suitable for PROFINET cables or fibre-optic cables?
This order code is for PROFIBUS FastConnect. For other cable types, select the appropriate tool according to the cable and connector manufacturer. A matching outer diameter does not guarantee a suitable cutting depth.
Are connectors or replacement cartridges included in the delivery?
Connectors, cables and replacement cartridges are sold separately. We will confirm the exact contents of the tool package in the quotation for the selected variant.
What information should I provide to verify correct usage?
Please send us the full order number for the cable and connector, a photograph of the cable labelling, and a description of the required assembly. We will check the appropriate method of preparation and the necessary accessories.

PROFIBUS: 3 Sins and 10 Tips
The PROFIBUS industrial bus is highly tolerant and will forgive many faults. But if a critical fault occurs—or several small ones accumulate—you will definitely notice. That’s why this aging industrial network deserves attention. Even if faults on your network are still rare, they will gradually accumulate. What do our technicians recommend? What are their 10 tips for maintaining PROFIBUS?
Highlighted items are mandatory.





