Converter Modbus RTU Master / J1939 - HD67050
Converter Modbus RTU Master / J1939 - HD67050
The ADFweb HD67050 reads serial Modbus RTU Slave devices and makes their values available in a J1939 network. More
Code: HD67050
The ADFweb HD67050 reads serial Modbus RTU Slave devices and makes their values available in a J1939 network. More
Code: HD67050
ADFweb HD67050
Modbus RTU Master / J1939
The ADFweb HD67050 reads serial Modbus RTU Slave devices and makes their values available in a J1939 network.
We will check your selection and prepare a quotation
Send us the device models, required connection and quantity.
Converter applications
Use it to integrate serial meter and controller registers into J1939 communication. The converter sends configured requests to the Modbus Slave units itself.
Technical specifications HD67050
| Order code | HD67050 |
|---|---|
| Protocol connection | Modbus RTU Master / J1939 |
| Interfaces and ports | J1939 (CAN); RS232; RS485 |
| Power supply | 8-19 V AC / 8-35 V DC |
| Consumption at 24 V DC | 4 W |
| Operating temperature | -40 °C to +85 °C |
| Mounting | 35 mm DIN rail |
| Dimensions of the version shown (D × W × H) | 120 × 23 × 107 mm |
| Device weight | approximately 200 g |
| Configuration software | SW67050 |
For an older device, check the hardware version and connections against its label.
Communication and configuration
In SW67050, configure serial line parameters, Modbus Slave addresses, registers to read and J1939 messages.
This is the HD67050 version. The HD67050M housing version has a separate order code. Check the serial interface, addresses and meter data formats before wiring. For configuration, prepare PGNs, device addresses, transfer direction and data positions in received and transmitted J1939 messages. Check value meanings, units and any scaling against the connected device documentation.
Supply and accessories
Please provide the complete order code. If you need a power supply, connection cables or help with configuration, include them in your enquiry. We will confirm the scope of supply and required accessories for your installation in the quotation.
Documentation and software
Diagrams and hardware version
The images help identify the hardware version. When replacing an older unit, compare its label, connectors and dimensions; we will confirm the version to be supplied in the quotation.
Frequently asked questions
Is knowing the two protocols enough?
The device roles, physical interfaces and data to be transferred must also be checked. This is the HD67050 version. The HD67050M housing version has a separate order code. Check the serial interface, addresses and meter data formats before wiring. For configuration, prepare PGNs, device addresses, transfer direction and data positions in received and transmitted J1939 messages. Check value meanings, units and any scaling against the connected device documentation.
How is this converter configured?
In SW67050, configure serial line parameters, Modbus Slave addresses, registers to read and J1939 messages.
What information should I send to check the selection?
Send the exact device models at both ends, the protocols and communication roles, the number of devices and the required values. For a PLC, include the firmware and method of accessing its data.
FOXON support with selection and ordering
Selection based on your devices
We will review the specific connection, communication roles and required data.
Availability check
Before you place an order, we will confirm current availability and the possible delivery date.
Documentation for the exact order code
We select the documentation and configuration tool using the complete order code.
Accessories for your installation
We will include the requested accessories in the quotation to suit the connection arrangement.
Choosing the correct version
Two devices with the same protocols can have different functions. Check the gateway role on each side, the connectors and the complete order code.
This is the HD67050 version. The HD67050M housing version has a separate order code. Check the serial interface, addresses and meter data formats before wiring. For configuration, prepare PGNs, device addresses, transfer direction and data positions in received and transmitted J1939 messages. Check value meanings, units and any scaling against the connected device documentation.
Converter enquiry HD67050
Provide the order code, quantity and the devices you need to connect. We will check the suitable version and prepare a quotation.
Request the converterTechnical specifications HD67050
| Order code | HD67050 |
|---|---|
| Protocol connection | Modbus RTU Master / J1939 |
| Interfaces and ports | J1939 (CAN); RS232; RS485 |
| Power supply | 8-19 V AC / 8-35 V DC |
| Consumption at 24 V DC | 4 W |
| Operating temperature | -40 °C to +85 °C |
| Mounting | 35 mm DIN rail |
| Dimensions of the version shown (D × W × H) | 120 × 23 × 107 mm |
| Device weight | approximately 200 g |
| Configuration software | SW67050 |
For an older device, check the hardware version and connections against its label.