Battery V200H-3ME for Mitsubishi PLC MR-S11 and MR-S12
Backup lithium battery 3,6V; 200mAh; dimensions: 88 x 25 x 9mm. Replacement battery for 3/V200H, 3GB170-F, 3GB280-F, 3GP320-F, C0307, C0307-1, C0308, GP150H-3F, GB250-3FB2, GP250H-3F, 63-000367-00, 781526, THD-0004, THD-004 and CP300H-3ME. More
Code: V200H-3ME
Backup lithium battery 3,6V; 200mAh; dimensions: 88 x 25 x 9mm. Replacement battery for 3/V200H, 3GB170-F, 3GB280-F, 3GP320-F, C0307, C0307-1, C0308, GP150H-3F, GB250-3FB2, GP250H-3F, 63-000367-00, 781526, THD-0004, THD-004 and CP300H-3ME. More
Code: V200H-3ME
V200H-3ME – rechargeable NiMH battery pack, 3.6 V / 200 mAh
V200H-3ME is a rechargeable NiMH battery for suitable industrial equipment. The nominal voltage is 3.6 V. The listed capacity is 200 mAh.
Need to confirm the correct battery configuration?
Please send a photograph of the battery, the connector and the device label. We will confirm availability and the delivery date.
Battery application
This battery is offered for equipment Mitsubishi MR-S11 and MR-S12. Verify the exact replacement against the original battery designation, the specific unit and its documentation.
Technical specifications
| Product code | V200H-3ME |
|---|---|
| Rated voltage | 3.6 V |
| Listed capacity | 200 mAh |
| Listed dimensions | 88 × 25 × 9 mm |
| Connections | Depending on the version supplied; check the contacts and polarity |
| Chemistry | NiMH; rechargeable |
Replacements and other designations
The designations are used to identify the replacement being sought. Before ordering, compare the electrical parameters, dimensions and contacts; this list does not confirm automatic interchangeability in all devices.
3/V200H3GB170-F3GB280-F3GP320-FC0307C0307-1C0308GP150H-3FGB250-3FB2GP250H-3F63-000367-00781526THD-0004THD-004CP300H-3MEConfiguration and replacement selection
This is a NiMH rechargeable battery pack for the corresponding Mitsubishi MR-S11 / MR-S12 devices. Do not replace it with a primary lithium cell solely on the basis of matching voltage. Compare the connector, polarity, mounting and the prescribed charging method.
Scope of delivery
One battery in the relevant version. The device, holder and other modules are not included in the scope of supply unless expressly stated in the quotation.
Frequently asked questions about batteries
What is this battery assembly used for?
The charging unit for the relevant device ensures power supply to the backed-up circuits. Check the exact function and scope of the backup for the specific Mitsubishi MR-S11 / MR-S12 device. This is not a power source for normal engine operation.
Is the battery rechargeable?
Yes. Charge it only using a charging system designed for the specific device and this type of battery. A non-rechargeable lithium cell is not a suitable replacement.
How often is replacement recommended?
Follow the equipment manufacturer’s instructions. Monitor the battery’s age, runtime per charge, casing condition and diagnostics. For rechargeable batteries, wear and tear also depends on the number of charge cycles and the charging method. There is no universal replacement interval applicable to all configurations.
How can I tell if a battery is worn out or faulty?
Depending on the device, this may manifest as a reduced operating time, an inability to charge properly or a diagnostic message. Do not continue to use a damaged or deformed battery pack; follow the device’s service instructions.
How does the cold affect a battery?
Low temperatures limit the available power and usable capacity. The temperature inside the device and the limits of the entire assembly are decisive. The operating range differs from the charging range; observe both sets of manufacturer’s specifications.
Does high temperature shorten service life?
Higher temperatures accelerate battery ageing. Take into account both operating and storage conditions, and do not leave a spare battery in an overheated area. Adhere to the temperature limits for both the equipment and the battery pack.
Is the battery replaced whilst the device is switched on or off?
Follow the procedure for the specific type of equipment. Before disconnecting the battery pack, ensure that the machine and equipment are in the required state. Do not regard replacement whilst the system is live or maintaining operation during replacement as a generally supported function.
What should be checked before and after replacement?
Compare the order number, voltage, technology, dimensions, contacts and mechanical mounting. Check the condition of the equipment and its diagnostics. After replacement, verify correct installation, signalling and operation in accordance with the manufacturer’s instructions; record the date of replacement in the maintenance log.
Is the same voltage sufficient for selection?
No. The chemical system, charging conditions, contacts, polarity, mechanical design and equipment requirements must also match. Identical size or voltage alone do not constitute confirmation of a suitable replacement.
How should a spare battery be stored?
Comply with the manufacturer’s specifications regarding temperature, state of charge and storage duration. Protect the contacts from short circuits, moisture and mechanical damage. The storage methods for primary batteries and rechargeable batteries differ.
Why buy a backup battery from FOXON?
Batteries for industrial equipment in one place
In one e-shop, we offer backup batteries for well-known PLCs, HMI panels, robots and other industrial equipment. Order batteries for different machines from one supplier, without searching several e-shops.
Standard batteries and custom assemblies
We supply standard batteries and custom assemblies. If you cannot find the battery in our e-shop, send a photo of the original battery or its order number. We will clarify the required specifications and arrange production of the appropriate configuration.
Help with selecting a replacement
We compare the battery designation, electrical specifications, dimensions, connector and polarity. Using a photo of the battery and device nameplate, we help identify the configuration required.
Availability and delivery date
We check current battery availability and confirm the expected delivery date before you place an order.
Battery versions available for purchase
Please enquire about a new battery in the appropriate version. We distinguish between a compatible assembly and the original part from the equipment manufacturer; we will confirm the exact version in our quotation.
Automation spare parts and repairs
Do you also need a PLC, HMI panel or drive component for the same machine? FOXON supplies spare parts and arranges repairs of industrial electronics. Sales and repairs of automation parts.
Send us the battery designation
Please provide the quantity, a photograph of the connector and a photograph of the device label. We will verify the model, price and availability.
Request a battery or confirm the configurationHighlighted items are mandatory.