SEN-9428P-24V-RW - VOLKTEK Industrial unmanaged switch / PoE+

SEN-9428P-24V-RW - VOLKTEK Industrial unmanaged switch / PoE+


VOLKTEK

VOLKTEK SEN-9428P-24V-RW: 8× RJ45 / 10/100/1000 Mbit/s; 2× SFP / 100M / 1G. Unmanaged; PoE+ / 124W @ 24V DC 240W @ 48V DC. 24-57 V DC; IP30; -40…+75 °C. More

Code: SEN-9428P-24V-RW

Rezervace termínu

Get a quote
VOLKTEK

VOLKTEK SEN-9428P-24V-RW: 8× RJ45 / 10/100/1000 Mbit/s; 2× SFP / 100M / 1G. Unmanaged; PoE+ / 124W @ 24V DC 240W @ 48V DC. 24-57 V DC; IP30; -40…+75 °C. More

Code: SEN-9428P-24V-RW

VOLKTEK SEN-9428P-24V-RW

Industrial unmanaged switch / PoE+

Carries data and power to compatible cameras, access points and other devices over one Ethernet cable. The powered port count and shared power budget determine the endpoint configuration.

8× RJ45 / 10/100/1000 Mbit/s2× SFP / 100M / 1GUnmanaged24-57 V DC

DIP switch configuration: PWR / RPS · Storm Control · QoS P1/P2 · SFP 100M / 1G

VOLKTEK SEN-9428P-24V-RW - Overall device view
Overall device view. Click to enlarge the image.

We will select a switch for your network
We will review endpoints, ports and power, then confirm price, current availability and delivery time for a new product.

Enquire about a VOLKTEK solution
8× PoE+30 W PSE
UnmanagedConnect without configuration
-40…+75 °CIP30 / DIN rail

Applications and device connections

For IP surveillance, wireless access points and network devices in production or transport infrastructure. Each endpoint must match the PoE standard of its port. For outdoor applications, install the switch in a suitable protected enclosure.

Connect without configuration

The device operates without web management or a switch IP address setting. Once power and Ethernet cables are connected, it interconnects the end devices. Set PLC, HMI and other device addresses on those devices.

Endpoint power supply

8× PoE+ / IEEE 802.3af / 802.3at. Maximum port power: 30 W PSE. Power budget: 124W @ 24V DC 240W @ 48V DC. Per-port PSE limits and the shared power budget apply together. Ports cannot all receive their maximum allocation if the total exceeds the switch budget. Cable losses also reduce power available to the PD.

Power supply and alarm

24-57 V DC. Two power inputs allow connection of primary and redundant supplies. A separate backed-up supply is needed to bridge simultaneous failure of both sources. Follow input voltage, polarity and specified wiring. Select the supply for switch consumption, endpoint power and operating reserve.

DIP switch configuration

Enable or disable PWR / RPS input monitoring. Limit broadcast traffic with Storm Control. QoS priority for ports 1 and 2. Select fibre port speed: 100 Mbit/s or 1 Gbit/s.

Set switch positions according to device labels and the supplied installation guide.

Applications and approval conditions

EN 50155 / EN 50121-4

For railway applications requiring EN 50155 and EN 50121-4. Before ordering, check the required approval, power supply, temperature conditions and exact installation location.

Technical specifications

Order codeVOLKTEK SEN-9428P-24V-RW
ManagementUnmanaged
Data interface8× RJ45 / 10/100/1000 Mbit/s
Optical interface2× SFP / 100M / 1G
Power supply24-57 V DC
Power consumption10 W
Network power standardIEEE 802.3af / 802.3at
PoE port count8
Maximum port power30 W PSE
Power budget124W @ 24V DC 240W @ 48V DC
Relay alarm1 A / 24 V DC
DIPEnable or disable PWR / RPS input monitoring. Limit broadcast traffic with Storm Control. QoS priority for ports 1 and 2. Select fibre port speed: 100 Mbit/s or 1 Gbit/s.
Protection ratingIP30
MountingDIN rail
Operating temperature-40…+75 °C
Approvals and application standardsEN 50155 / EN 50121-4
Dimensions (W × H × D)50 × 161.5 × 119.9 mm
Weight930 g

Interfaces and mounting

Select the SFP module separately. It must match the slot speed, fibre type, connector, wavelength and remote device. Reach depends on the selected optics and link attenuation.

VOLKTEK SEN-9428P-24V-RW - Interface diagram
Interface diagram. Original manufacturer diagram with English labels. Click to enlarge the image.
VOLKTEK SEN-9428P-24V-RW - Dimensional drawing
Dimensional drawing. Click to enlarge the image.

Install in a suitable cabinet or protective enclosure. Provide grounding, free airflow and access to connectors. Neither IP30 nor IP40 provides protection against water. Wire with power disconnected and follow the installation guide.

Package contents

The standard set contains the switch and mounting accessories for the selected version. Power supply, fibre modules and data cabling are selected separately. We will confirm the complete delivery contents in the quotation.

Downloads

Original VOLKTEK documentation in English. Files are also available in the Downloads tab.

VOLKTEK SEN-9428P-24V-RW - Datasheet (EN)VOLKTEK / ENOpen PDF
VOLKTEK SEN-9428P-24V-RW - Quick installation guide (EN)VOLKTEK / ENOpen PDF

VOLKTEK videos

Official VOLKTEK video about the technology or product range. The video is in English; see the table and documents above for exact model specifications.

VOLKTEK technology and solutions

Frequently asked questions

Does this switch support management?

Unmanaged. The device operates without web management or a switch IP address setting. Once power and Ethernet cables are connected, it interconnects the end devices. Set PLC, HMI and other device addresses on those devices.

Which power supply do I need?

24-57 V DC. Two power inputs allow connection of primary and redundant supplies. A separate backed-up supply is needed to bridge simultaneous failure of both sources. Follow input voltage, polarity and specified wiring. Select the supply for switch consumption, endpoint power and operating reserve.

What do the DIP switches configure?

Enable or disable PWR / RPS input monitoring. Limit broadcast traffic with Storm Control. QoS priority for ports 1 and 2. Select fibre port speed: 100 Mbit/s or 1 Gbit/s. Set switch positions according to device labels and the supplied installation guide.

How do I select the right optics?

2× SFP / 100M / 1G. Select the SFP module separately. It must match the slot speed, fibre type, connector, wavelength and remote device. Reach depends on the selected optics and link attenuation.

What power does it supply to endpoints?

8× PoE+ / IEEE 802.3af / 802.3at. Maximum port power: 30 W PSE. Power budget: 124W @ 24V DC 240W @ 48V DC. Per-port PSE limits and the shared power budget apply together. Ports cannot all receive their maximum allocation if the total exceeds the switch budget. Cable losses also reduce power available to the PD.

Will you check model suitability and availability?

We supply new original VOLKTEK products with warranty. We help select the switch, supply, optics and accessories. Before ordering, we check price, current stock availability and delivery time.

Why buy from FOXON

We are a VOLKTEK distributor. We supply new original products with warranty and technical support.

New products with warranty

New original product with warranty. Availability and delivery time confirmed on enquiry.

Technical support

We advise on interfaces, optics, power and accessories for your application.

Availability and delivery

We will check current availability, price and possible delivery time before ordering.

Pre-purchase consultation

We will review endpoints, ports and power, then confirm price, current availability and delivery time for a new product.

More than 3,500customers
We supply tomore than 100 countries worldwide
Express delivery?We’ll look into it; please contact us immediately.

Enquiry and technical consultation

Send the quantity, connected devices, power supply, cable type and link distance. We will help select a suitable version and prepare a quotation.

We will select a switch for your network
We will review endpoints, ports and power, then confirm price, current availability and delivery time for a new product.

Enquire about a VOLKTEK solution

Technical specifications

Order codeVOLKTEK SEN-9428P-24V-RW
ManagementUnmanaged
Data interface8× RJ45 / 10/100/1000 Mbit/s
Optical interface2× SFP / 100M / 1G
Power supply24-57 V DC
Power consumption10 W
Network power standardIEEE 802.3af / 802.3at
PoE port count8
Maximum port power30 W PSE
Power budget124W @ 24V DC 240W @ 48V DC
Relay alarm1 A / 24 V DC
DIPEnable or disable PWR / RPS input monitoring. Limit broadcast traffic with Storm Control. QoS priority for ports 1 and 2. Select fibre port speed: 100 Mbit/s or 1 Gbit/s.
Protection ratingIP30
MountingDIN rail
Operating temperature-40…+75 °C
Approvals and application standardsEN 50155 / EN 50121-4
Dimensions (W × H × D)50 × 161.5 × 119.9 mm
Weight930 g

Endpoint power supply

8× PoE+ / IEEE 802.3af / 802.3at. Maximum port power: 30 W PSE. Power budget: 124W @ 24V DC 240W @ 48V DC. Per-port PSE limits and the shared power budget apply together. Ports cannot all receive their maximum allocation if the total exceeds the switch budget. Cable losses also reduce power available to the PD.

DIP switch configuration

Enable or disable PWR / RPS input monitoring. Limit broadcast traffic with Storm Control. QoS priority for ports 1 and 2. Select fibre port speed: 100 Mbit/s or 1 Gbit/s.

Set switch positions according to device labels and the supplied installation guide.

Applications and approval conditions

EN 50155 / EN 50121-4

For railway applications requiring EN 50155 and EN 50121-4. Before ordering, check the required approval, power supply, temperature conditions and exact installation location.

Frequently asked questions

Does this switch support management?

Unmanaged. The device operates without web management or a switch IP address setting. Once power and Ethernet cables are connected, it interconnects the end devices. Set PLC, HMI and other device addresses on those devices.

Which power supply do I need?

24-57 V DC. Two power inputs allow connection of primary and redundant supplies. A separate backed-up supply is needed to bridge simultaneous failure of both sources. Follow input voltage, polarity and specified wiring. Select the supply for switch consumption, endpoint power and operating reserve.

What do the DIP switches configure?

Enable or disable PWR / RPS input monitoring. Limit broadcast traffic with Storm Control. QoS priority for ports 1 and 2. Select fibre port speed: 100 Mbit/s or 1 Gbit/s. Set switch positions according to device labels and the supplied installation guide.

How do I select the right optics?

2× SFP / 100M / 1G. Select the SFP module separately. It must match the slot speed, fibre type, connector, wavelength and remote device. Reach depends on the selected optics and link attenuation.

What power does it supply to endpoints?

8× PoE+ / IEEE 802.3af / 802.3at. Maximum port power: 30 W PSE. Power budget: 124W @ 24V DC 240W @ 48V DC. Per-port PSE limits and the shared power budget apply together. Ports cannot all receive their maximum allocation if the total exceeds the switch budget. Cable losses also reduce power available to the PD.

Will you check model suitability and availability?

We supply new original VOLKTEK products with warranty. We help select the switch, supply, optics and accessories. Before ordering, we check price, current stock availability and delivery time.