IMC-553 - VOLKTEK SPE media converter
- Switches and Wi-Fi
- Media converters
- SPE Converters
- IMC-553 - VOLKTEK SPE media converter
IMC-553 - VOLKTEK SPE media converter
SPE media converter
1× RJ45 / 10 Mbit/s; 1× 10BASE-T1L / Terminal block. Connects standard 10BASE-T Ethernet to 10BASE-T1L Single Pair Ethernet. Transmission at 10 Mbit/s over one wire pair connects a remote SPE device; the design must account for cable characteristics.
Reach of up to 1000 m depends on suitable cabling and installation conditions. Existing wire pairs must meet 10BASE-T1L requirements. Power the converter separately; power delivery over the SPE link is not offered here.

We will select a media converter for your application
We advise on interfaces, optics, power and accessories for your application. We will check current availability, price and possible delivery time before ordering.
Applications and device connections
Connects standard 10BASE-T Ethernet to 10BASE-T1L Single Pair Ethernet. Transmission at 10 Mbit/s over one wire pair connects a remote SPE device; the design must account for cable characteristics.
Technical specifications
| Order code | VOLKTEK IMC-553 |
|---|---|
| Data interface | 1× RJ45 / 10 Mbit/s |
| SPE | 1× 10BASE-T1L / Terminal block |
| Power supply | 12-48 V DC |
| Power consumption | 3 W |
| Settings and controls | Two DIP switches select automatic or manual SPE mode and the Master/Slave role. Manual mode requires a Master at one end and a Slave at the other. Disconnect and reconnect power to apply changes. |
| Protection rating | IP30 |
| Operating temperature | -40…+75 °C |
| Storage temperature | -40…+85 °C |
| Dimensions (W × H × D) | 86.2 × 23.4 × 59.4 mm |
| Weight | 205.5 g |
| Mounting | DIN rail |
Selecting the link and optics
Reach of up to 1000 m depends on suitable cabling and installation conditions. Existing wire pairs must meet 10BASE-T1L requirements. Power the converter separately; power delivery over the SPE link is not offered here.
Settings and controls
Two DIP switches select automatic or manual SPE mode and the Master/Slave role. Manual mode requires a Master at one end and a Slave at the other. Disconnect and reconnect power to apply changes.
Power supply
12-48 V DC. Select a power supply separately according to input voltage, consumption and operating temperature.
Interfaces and mounting






Install in a suitable cabinet or protected location. IP30 provides no protection against water. Allow airflow, suitable temperature and access to connectors. Wire with power disconnected and follow the installation guide.
Package contents
- 1× VOLKTEK IMC-553
- 1× DIN-rail mounting kit
- 2× Terminal block
- 1× RJ45 cap
- 1× Quick installation guide
Select a power supply separately according to input voltage, consumption and operating temperature.
Downloads
Original VOLKTEK documentation in English. Files are also available in the Downloads tab.
VOLKTEK videos
Official video from VOLKTEK.
Frequently asked questions
Which interfaces does the converter connect?
1× RJ45 / 10 Mbit/s; 1× 10BASE-T1L / Terminal block. Connects standard 10BASE-T Ethernet to 10BASE-T1L Single Pair Ethernet. Transmission at 10 Mbit/s over one wire pair connects a remote SPE device; the design must account for cable characteristics.
Which conditions apply to SPE cabling?
Reach of up to 1000 m depends on suitable cabling and installation conditions. Existing wire pairs must meet 10BASE-T1L requirements. Power the converter separately; power delivery over the SPE link is not offered here.
How is the converter configured?
Two DIP switches select automatic or manual SPE mode and the Master/Slave role. Manual mode requires a Master at one end and a Slave at the other. Disconnect and reconnect power to apply changes.
Which power supply do I need?
12-48 V DC. Select a power supply separately according to input voltage, consumption and operating temperature.
What is included in the standard package?
1× VOLKTEK IMC-553; 1× DIN-rail mounting kit; 2× Terminal block; 1× RJ45 cap; 1× Quick installation guide.
Will you check the version and availability?
We are a VOLKTEK distributor. We supply new original products with warranty and technical support. We will check current availability, price and possible delivery time before ordering.
Why buy from FOXON
We are a VOLKTEK distributor. We supply new original products with warranty and technical support.
New products with warranty
New original product with warranty. Availability and delivery time confirmed on enquiry.
Technical support
We advise on interfaces, optics, power and accessories for your application.
Availability and delivery
We will check current availability, price and possible delivery time before ordering.
Pre-purchase consultation
Send the quantity, connected devices, power supply, cable type and link distance. We will help select a suitable version and prepare a quotation.
Enquiry and technical consultation
Send the quantity, connected devices, power supply, cable type and link distance. We will help select a suitable version and prepare a quotation.
We will select a media converter for your application
We advise on interfaces, optics, power and accessories for your application. We will check current availability, price and possible delivery time before ordering.
| Number of SFP slots | 0 |
|---|
Technical specifications
| Order code | VOLKTEK IMC-553 |
|---|---|
| Data interface | 1× RJ45 / 10 Mbit/s |
| SPE | 1× 10BASE-T1L / Terminal block |
| Power supply | 12-48 V DC |
| Power consumption | 3 W |
| Settings and controls | Two DIP switches select automatic or manual SPE mode and the Master/Slave role. Manual mode requires a Master at one end and a Slave at the other. Disconnect and reconnect power to apply changes. |
| Protection rating | IP30 |
| Operating temperature | -40…+75 °C |
| Storage temperature | -40…+85 °C |
| Dimensions (W × H × D) | 86.2 × 23.4 × 59.4 mm |
| Weight | 205.5 g |
| Mounting | DIN rail |
Selecting the link and optics
Reach of up to 1000 m depends on suitable cabling and installation conditions. Existing wire pairs must meet 10BASE-T1L requirements. Power the converter separately; power delivery over the SPE link is not offered here.
Frequently asked questions
Which interfaces does the converter connect?
1× RJ45 / 10 Mbit/s; 1× 10BASE-T1L / Terminal block. Connects standard 10BASE-T Ethernet to 10BASE-T1L Single Pair Ethernet. Transmission at 10 Mbit/s over one wire pair connects a remote SPE device; the design must account for cable characteristics.
Which conditions apply to SPE cabling?
Reach of up to 1000 m depends on suitable cabling and installation conditions. Existing wire pairs must meet 10BASE-T1L requirements. Power the converter separately; power delivery over the SPE link is not offered here.
How is the converter configured?
Two DIP switches select automatic or manual SPE mode and the Master/Slave role. Manual mode requires a Master at one end and a Slave at the other. Disconnect and reconnect power to apply changes.
Which power supply do I need?
12-48 V DC. Select a power supply separately according to input voltage, consumption and operating temperature.
What is included in the standard package?
1× VOLKTEK IMC-553; 1× DIN-rail mounting kit; 2× Terminal block; 1× RJ45 cap; 1× Quick installation guide.
Will you check the version and availability?
We are a VOLKTEK distributor. We supply new original products with warranty and technical support. We will check current availability, price and possible delivery time before ordering.