IEN-9425-SS - VOLKTEK Industrial unmanaged switch
- Switches and Wi-Fi
- Substation Ethernet Switches
- IEN-9425-SS - VOLKTEK Industrial unmanaged switch
IEN-9425-SS - VOLKTEK Industrial unmanaged switch
VOLKTEK IEN-9425-SS: 5× RJ45 / 10/100/1000 Mbit/s; 2× SFP / 1G. Unmanaged. 20-60 V DC; IP30; -40…+75 °C. More
Code: IEN-9425-SS
VOLKTEK IEN-9425-SS: 5× RJ45 / 10/100/1000 Mbit/s; 2× SFP / 1G. Unmanaged. 20-60 V DC; IP30; -40…+75 °C. More
Code: IEN-9425-SS
Industrial unmanaged switch
Connects Ethernet devices in an industrial network. Copper ports connect endpoints; fibre slots allow links between cabinets or to an upstream network.
DIP switch configuration: PWR / RPS

We will select a switch for your network
We will review endpoints, ports and power, then confirm price, current availability and delivery time for a new product.
Applications and device connections
For connecting PLCs, HMIs, industrial PCs and other Ethernet devices. Design topology, speeds and fibre modules around distances, communication availability requirements and installation conditions.
Connect without configuration
The device operates without web management or a switch IP address setting. Once power and Ethernet cables are connected, it interconnects the end devices. Set PLC, HMI and other device addresses on those devices.
Power supply and alarm
20-60 V DC. Two power inputs allow connection of primary and redundant supplies. A separate backed-up supply is needed to bridge simultaneous failure of both sources. Follow input voltage, polarity and specified wiring. Select the supply for switch consumption, endpoint power and operating reserve.
DIP switch configuration
Enable or disable PWR / RPS input monitoring.
Set switch positions according to device labels and the supplied installation guide.
Applications and approval conditions
IEC 61850-3 / IEEE 1613
For industrial communication in substations and power facilities requiring IEC 61850-3 and IEEE 1613. Approval concerns switch operating conditions; verify endpoint protocols and functions separately.
Technical specifications
| Order code | VOLKTEK IEN-9425-SS |
|---|---|
| Management | Unmanaged |
| Data interface | 5× RJ45 / 10/100/1000 Mbit/s |
| Optical interface | 2× SFP / 1G |
| Power supply | 20-60 V DC |
| Power consumption | 13 W |
| Relay alarm | 1 A / 24 V DC |
| DIP | Enable or disable PWR / RPS input monitoring. |
| Protection rating | IP30 |
| Mounting | DIN rail |
| Operating temperature | -40…+75 °C |
| Approvals and application standards | IEC 61850-3 / IEEE 1613 |
| Dimensions (W × H × D) | 50 × 161.5 × 119.9 mm |
| Weight | 869 g |
Interfaces and mounting
Select the SFP module separately. It must match the slot speed, fibre type, connector, wavelength and remote device. Reach depends on the selected optics and link attenuation.




Install in a suitable cabinet or protective enclosure. Provide grounding, free airflow and access to connectors. Neither IP30 nor IP40 provides protection against water. Wire with power disconnected and follow the installation guide.
Package contents
The standard set contains the switch and mounting accessories for the selected version. Power supply, fibre modules and data cabling are selected separately. We will confirm the complete delivery contents in the quotation.
Downloads
Original VOLKTEK documentation in English. Files are also available in the Downloads tab.
VOLKTEK videos
Official VOLKTEK video about the technology or product range. The video is in English; see the table and documents above for exact model specifications.
Frequently asked questions
Does this switch support management?
Unmanaged. The device operates without web management or a switch IP address setting. Once power and Ethernet cables are connected, it interconnects the end devices. Set PLC, HMI and other device addresses on those devices.
Which power supply do I need?
20-60 V DC. Two power inputs allow connection of primary and redundant supplies. A separate backed-up supply is needed to bridge simultaneous failure of both sources. Follow input voltage, polarity and specified wiring. Select the supply for switch consumption, endpoint power and operating reserve.
What do the DIP switches configure?
Enable or disable PWR / RPS input monitoring. Set switch positions according to device labels and the supplied installation guide.
How do I select the right optics?
2× SFP / 1G. Select the SFP module separately. It must match the slot speed, fibre type, connector, wavelength and remote device. Reach depends on the selected optics and link attenuation.
Applications and approval conditions
For industrial communication in substations and power facilities requiring IEC 61850-3 and IEEE 1613. Approval concerns switch operating conditions; verify endpoint protocols and functions separately.
Will you check model suitability and availability?
We supply new original VOLKTEK products with warranty. We help select the switch, supply, optics and accessories. Before ordering, we check price, current stock availability and delivery time.
Why buy from FOXON
We are a VOLKTEK distributor. We supply new original products with warranty and technical support.
New products with warranty
New original product with warranty. Availability and delivery time confirmed on enquiry.
Technical support
We advise on interfaces, optics, power and accessories for your application.
Availability and delivery
We will check current availability, price and possible delivery time before ordering.
Pre-purchase consultation
We will review endpoints, ports and power, then confirm price, current availability and delivery time for a new product.
Enquiry and technical consultation
Send the quantity, connected devices, power supply, cable type and link distance. We will help select a suitable version and prepare a quotation.
We will select a switch for your network
We will review endpoints, ports and power, then confirm price, current availability and delivery time for a new product.
Technical specifications
| Order code | VOLKTEK IEN-9425-SS |
|---|---|
| Management | Unmanaged |
| Data interface | 5× RJ45 / 10/100/1000 Mbit/s |
| Optical interface | 2× SFP / 1G |
| Power supply | 20-60 V DC |
| Power consumption | 13 W |
| Relay alarm | 1 A / 24 V DC |
| DIP | Enable or disable PWR / RPS input monitoring. |
| Protection rating | IP30 |
| Mounting | DIN rail |
| Operating temperature | -40…+75 °C |
| Approvals and application standards | IEC 61850-3 / IEEE 1613 |
| Dimensions (W × H × D) | 50 × 161.5 × 119.9 mm |
| Weight | 869 g |
DIP switch configuration
Enable or disable PWR / RPS input monitoring.
Set switch positions according to device labels and the supplied installation guide.
Applications and approval conditions
IEC 61850-3 / IEEE 1613
For industrial communication in substations and power facilities requiring IEC 61850-3 and IEEE 1613. Approval concerns switch operating conditions; verify endpoint protocols and functions separately.
Frequently asked questions
Does this switch support management?
Unmanaged. The device operates without web management or a switch IP address setting. Once power and Ethernet cables are connected, it interconnects the end devices. Set PLC, HMI and other device addresses on those devices.
Which power supply do I need?
20-60 V DC. Two power inputs allow connection of primary and redundant supplies. A separate backed-up supply is needed to bridge simultaneous failure of both sources. Follow input voltage, polarity and specified wiring. Select the supply for switch consumption, endpoint power and operating reserve.
What do the DIP switches configure?
Enable or disable PWR / RPS input monitoring. Set switch positions according to device labels and the supplied installation guide.
How do I select the right optics?
2× SFP / 1G. Select the SFP module separately. It must match the slot speed, fibre type, connector, wavelength and remote device. Reach depends on the selected optics and link attenuation.
Applications and approval conditions
For industrial communication in substations and power facilities requiring IEC 61850-3 and IEEE 1613. Approval concerns switch operating conditions; verify endpoint protocols and functions separately.
Will you check model suitability and availability?
We supply new original VOLKTEK products with warranty. We help select the switch, supply, optics and accessories. Before ordering, we check price, current stock availability and delivery time.