7015-4P2T-T1L - VOLKTEK Industrial Single Pair Ethernet switch / SPoE
- Switches and Wi-Fi
- Industrial PoE Switches
- SPoE Switches
- 7015-4P2T-T1L - VOLKTEK Industrial Single Pair Ethernet switch / SPoE
7015-4P2T-T1L - VOLKTEK Industrial Single Pair Ethernet switch / SPoE
VOLKTEK 7015-4P2T-T1L: 2× RJ45 / 10/100 Mbit/s; 4× 10BASE-T1L / SPoE / 10 Mbit/s. Unmanaged; SPoE / 132W. 20-30 V DC / class 10-12; 50-58 V DC / class 13-14; IP40; -40…+70 °C. More
Code: 7015-4P2T-T1L
VOLKTEK 7015-4P2T-T1L: 2× RJ45 / 10/100 Mbit/s; 4× 10BASE-T1L / SPoE / 10 Mbit/s. Unmanaged; SPoE / 132W. 20-30 V DC / class 10-12; 50-58 V DC / class 13-14; IP40; -40…+70 °C. More
Code: 7015-4P2T-T1L
Industrial Single Pair Ethernet switch / SPoE
Four 10BASE-T1L ports connect Single Pair Ethernet devices and carry data and SPoE power over one wire pair. Two RJ45 ports connect to a standard 10/100 Mbit/s Ethernet network.
DIP switch configuration: SPoE / Class / Auto / Master / Slave

We will select a switch for your network
We will review endpoints, ports and power, then confirm price, current availability and delivery time for a new product.
Applications and device connections
Single Pair Ethernet connects remote sensors and other compatible endpoints. Reach up to 1000 m depends on suitable cabling and installation conditions. SPoE power requires a matching PD and correctly selected power class.
Connect without configuration
The device operates without web management or a switch IP address setting. Once power and Ethernet cables are connected, it interconnects the end devices. Set PLC, HMI and other device addresses on those devices.
Endpoint power supply
This model does not supply PoE through its RJ45 ports. SPoE is available on four 10BASE-T1L ports. Use 20-30 V DC for classes 10-12 and 50-58 V DC for classes 13-14. The per-port maximum is 14 W at 24 V or 33 W at 55 V; the total budget is 132 W.
Power supply and alarm
20-30 V DC / class 10-12; 50-58 V DC / class 13-14. Follow input voltage, polarity and specified wiring. Select the supply for switch consumption, endpoint power and operating reserve.
DIP switch configuration
DIP switches enable SPoE, select the power class and set automatic/manual operation and Master/Slave roles per port. The class must match the connected PD. Use opposite Master and Slave roles in manual mode. Power-cycle the device to apply changes.
Set switch positions according to device labels and the supplied installation guide.
Technical specifications
| Order code | VOLKTEK 7015-4P2T-T1L |
|---|---|
| Management | Unmanaged |
| Data interface | 2× RJ45 / 10/100 Mbit/s |
| Optical interface | 4× 10BASE-T1L / SPoE / 10 Mbit/s |
| Power supply | 20-30 V DC / class 10-12; 50-58 V DC / class 13-14 |
| Power consumption | 4 W |
| Network power standard | IEEE 802.3cg / 10BASE-T1L / SPoE |
| PoE port count | 4× SPoE / 10BASE-T1L |
| Maximum port power | 14 W @ 24 V / 33 W @ 55 V |
| Power budget | 132W |
| DIP | DIP switches enable SPoE, select the power class and set automatic/manual operation and Master/Slave roles per port. The class must match the connected PD. Use opposite Master and Slave roles in manual mode. Power-cycle the device to apply changes. |
| Protection rating | IP40 |
| Mounting | DIN rail |
| Operating temperature | -40…+70 °C |
| Dimensions (W × H × D) | 31 × 136 × 105 mm |
| Weight | 525 g |
Interfaces and mounting




Install in a suitable cabinet or protective enclosure. Provide grounding, free airflow and access to connectors. Neither IP30 nor IP40 provides protection against water. Wire with power disconnected and follow the installation guide.
Package contents
The standard set contains the switch and mounting accessories for the selected version. Power supply, fibre modules and data cabling are selected separately. We will confirm the complete delivery contents in the quotation.
Downloads
Original VOLKTEK documentation in English. Files are also available in the Downloads tab.
VOLKTEK videos
Official VOLKTEK video about the technology or product range. The video is in English; see the table and documents above for exact model specifications.
Frequently asked questions
Does this switch support management?
Unmanaged. The device operates without web management or a switch IP address setting. Once power and Ethernet cables are connected, it interconnects the end devices. Set PLC, HMI and other device addresses on those devices.
Which power supply do I need?
20-30 V DC / class 10-12; 50-58 V DC / class 13-14. Follow input voltage, polarity and specified wiring. Select the supply for switch consumption, endpoint power and operating reserve.
What do the DIP switches configure?
DIP switches enable SPoE, select the power class and set automatic/manual operation and Master/Slave roles per port. The class must match the connected PD. Use opposite Master and Slave roles in manual mode. Power-cycle the device to apply changes. Set switch positions according to device labels and the supplied installation guide.
How do I select the right optics?
This model has no fibre slots. See the technical table for interfaces.
What power does it supply to endpoints?
This model does not supply PoE through its RJ45 ports. SPoE is available on four 10BASE-T1L ports. Use 20-30 V DC for classes 10-12 and 50-58 V DC for classes 13-14. The per-port maximum is 14 W at 24 V or 33 W at 55 V; the total budget is 132 W.
Will you check model suitability and availability?
We supply new original VOLKTEK products with warranty. We help select the switch, supply, optics and accessories. Before ordering, we check price, current stock availability and delivery time.
Why buy from FOXON
We are a VOLKTEK distributor. We supply new original products with warranty and technical support.
New products with warranty
New original product with warranty. Availability and delivery time confirmed on enquiry.
Technical support
We advise on interfaces, optics, power and accessories for your application.
Availability and delivery
We will check current availability, price and possible delivery time before ordering.
Pre-purchase consultation
We will review endpoints, ports and power, then confirm price, current availability and delivery time for a new product.
Enquiry and technical consultation
Send the quantity, connected devices, power supply, cable type and link distance. We will help select a suitable version and prepare a quotation.
We will select a switch for your network
We will review endpoints, ports and power, then confirm price, current availability and delivery time for a new product.
Technical specifications
| Order code | VOLKTEK 7015-4P2T-T1L |
|---|---|
| Management | Unmanaged |
| Data interface | 2× RJ45 / 10/100 Mbit/s |
| Optical interface | 4× 10BASE-T1L / SPoE / 10 Mbit/s |
| Power supply | 20-30 V DC / class 10-12; 50-58 V DC / class 13-14 |
| Power consumption | 4 W |
| Network power standard | IEEE 802.3cg / 10BASE-T1L / SPoE |
| PoE port count | 4× SPoE / 10BASE-T1L |
| Maximum port power | 14 W @ 24 V / 33 W @ 55 V |
| Power budget | 132W |
| DIP | DIP switches enable SPoE, select the power class and set automatic/manual operation and Master/Slave roles per port. The class must match the connected PD. Use opposite Master and Slave roles in manual mode. Power-cycle the device to apply changes. |
| Protection rating | IP40 |
| Mounting | DIN rail |
| Operating temperature | -40…+70 °C |
| Dimensions (W × H × D) | 31 × 136 × 105 mm |
| Weight | 525 g |
Endpoint power supply
This model does not supply PoE through its RJ45 ports. SPoE is available on four 10BASE-T1L ports. Use 20-30 V DC for classes 10-12 and 50-58 V DC for classes 13-14. The per-port maximum is 14 W at 24 V or 33 W at 55 V; the total budget is 132 W.
DIP switch configuration
DIP switches enable SPoE, select the power class and set automatic/manual operation and Master/Slave roles per port. The class must match the connected PD. Use opposite Master and Slave roles in manual mode. Power-cycle the device to apply changes.
Set switch positions according to device labels and the supplied installation guide.
Frequently asked questions
Does this switch support management?
Unmanaged. The device operates without web management or a switch IP address setting. Once power and Ethernet cables are connected, it interconnects the end devices. Set PLC, HMI and other device addresses on those devices.
Which power supply do I need?
20-30 V DC / class 10-12; 50-58 V DC / class 13-14. Follow input voltage, polarity and specified wiring. Select the supply for switch consumption, endpoint power and operating reserve.
What do the DIP switches configure?
DIP switches enable SPoE, select the power class and set automatic/manual operation and Master/Slave roles per port. The class must match the connected PD. Use opposite Master and Slave roles in manual mode. Power-cycle the device to apply changes. Set switch positions according to device labels and the supplied installation guide.
How do I select the right optics?
This model has no fibre slots. See the technical table for interfaces.
What power does it supply to endpoints?
This model does not supply PoE through its RJ45 ports. SPoE is available on four 10BASE-T1L ports. Use 20-30 V DC for classes 10-12 and 50-58 V DC for classes 13-14. The per-port maximum is 14 W at 24 V or 33 W at 55 V; the total budget is 132 W.
Will you check model suitability and availability?
We supply new original VOLKTEK products with warranty. We help select the switch, supply, optics and accessories. Before ordering, we check price, current stock availability and delivery time.