- PROFINET, PROFIBUS...
- PROFINET
- Cables PROFINET
- Euroconnection AS-PLPE010/69MM - Ready-made PROFINET cable with RJ45, length 1 m
Euroconnection AS-PLPE010/69MM - Ready-made PROFINET cable with RJ45, length 1 m
Euroconnection AS-PLPE010/69MM - a ready-made 1 m PROFINET cable with an RJ45 connector at both ends. For connecting industrial devices without the need to fit connectors on site. Sold individually. More
Code: AS-PLPE010/69MM
Euroconnection AS-PLPE010/69MM - a ready-made 1 m PROFINET cable with an RJ45 connector at both ends. For connecting industrial devices without the need to fit connectors on site. Sold individually. More
Code: AS-PLPE010/69MM
Ready-made PROFINET cable with RJ45 connector, 1 m long
2 RJ45 connectors · ready-to-connect assembly
The Euroconnection AS-PLPE010/69MM is a ready-made 1 m PROFINET patch cable with an RJ45 connector at both ends. It is suitable for connecting devices within an industrial control cabinet or between devices with compatible Ethernet ports. The connectors are already fitted.
Send the required length, device type and cable installation method. We will check the suitable version.
Use during the installation and maintenance of the network
The 1-metre length allows you to connect ports without having to make a cable on site. When choosing a cable, take into account the entire route, the bending radius and the space required for the connectors. Once connected, the cable should not be taut or put strain on the device’s socket.
Ordering a ready-made cable
This item refers to 1 ready-made cable, 1 m in length. Enter the number of cables in the ‘Quantity’ field. We also offer lengths of 0.5 m, 1 m, 2 m, 3 m, 5 m, 7 m and 10 m as separate items. We will confirm any other lengths and the minimum order quantity for custom assemblies in our quotation.
Connections and the area around the ports
There is an RJ45 connector at both ends. Before ordering, check the available space around the ports, the space required to secure the connector, and the device’s cabling requirements. The RJ45 connector itself does not guarantee a specific data transfer rate, PoE power supply or suitability for wet environments.
Route the cable in accordance with the specified bending radius and clearance from power lines. Ensure strain relief, proper shielding contact and protection against damage. After installation, check the wiring connections and the quality of the completed transmission route.
Movement and environmental conditions
The flexible design makes routing easier. For continuous movement in a drag chain, torsion or a robotic application, the exact complete assembly, bend radius and operating conditions must be confirmed. Send the travel length, speed, temperature and required number of cycles.
Cable and connector design
The photographs show the cable and details of the connectors in this product range. The exact code and length specified in the specifications are essential for placing an order.







Technical specifications for AS-PLPE010/69MM
| Manufacturer | Euroconnection |
|---|---|
| Order number | AS-PLPE010/69MM |
| Cable assembly length | 1 m |
| Uses | Connecting PROFINET devices via RJ45 ports |
| Connector on side A | RJ45 |
| Connector on side B | RJ45 |
| Design | A ready-made cable with connectors fitted |
| Cable colour | Green |
| Sales unit | Piece |
| Cable installation | Depending on the specific route and mechanical stress |
| Continuous movement and torsion | Must be confirmed for the exact cable assembly |
| PoE power supply | Must be confirmed for the exact cable assembly and devices |
| Water resistance | Verify for the complete cable assembly and connection |
| Contents of the delivery | 1 cable of the selected length, with RJ45 connectors at both ends |
Contents of the delivery
1 ready-made AS-PLPE010/69MM cable, 1 m long, with RJ45 connectors at both ends.
Selection and correct use
What length will I get with this code?
Order number AS-PLPE010/69MM refers to a 1-metre cable with an RJ45 connector at both ends. For a different length, please select a separate item or send an enquiry.
Is it ordered by the metre or by the piece?
This item refers to 1 ready-made cable, 1 m in length. Enter the number of cables in the ‘Quantity’ field. We also offer lengths of 0.5 m, 1 m, 2 m, 3 m, 5 m, 7 m and 10 m as separate items. We will confirm any other lengths and the minimum order quantity for custom assemblies in our quotation.
Do the connectors need to be fitted?
No. The cable is supplied with RJ45 connectors at both ends. Check the space around the ports before connection and route the cable without strain on the connectors.
Is it suitable for a drag chain?
The flexible design makes routing easier. For continuous movement in a drag chain, torsion or a robotic application, the exact complete assembly, bend radius and operating conditions must be confirmed. Send the travel length, speed, temperature and required number of cycles.
Can it be connected to any RJ45 port?
There is an RJ45 connector at both ends. Before ordering, check the available space around the ports, the space required to secure the connector, and the device’s cabling requirements. The RJ45 connector itself does not guarantee a specific data transfer rate, PoE power supply or suitability for wet environments.
Why order from FOXON
We can help you select the cabling and accessories to suit your specific PROFINET installation. Please send us a routing diagram, a list of devices and a description of the environment.
Selection for a specific route
We will review the cable routing, movement, temperature and requirements of the installation.
Cable and connectors
We will check the compatibility of the conductors, the shielding, the dimensions and the method of installation.
Preparing the cabling
We’ll help you choose the right tool and procedure for your specific connector.
PROFINET Diagnostics
We can help with cable testing and identifying the causes of communication failures.
Czech technical support
We will discuss the topology, environment and cable replacement procedure with regard to the machine operating conditions.
Delivery Confirmation
Before placing an order, we will confirm the specifications, quantity and delivery date.
Technical data sheets and installation documentation
In the ‘Downloads’ tab, you will find the Euroconnection cable assembly catalogue, featuring a selection of PROFINET / EtherCAT configurations. We will confirm the specific version for a demanding motion application based on the exact order number.
Open downloadsTechnical specifications of the AS-PLPE010/69MM
PROFINET RJ45 to RJ45 patch cable
Identification of the assembly
| Manufacturer | Euroconnection |
|---|---|
| Order number | AS-PLPE010/69MM |
| Cable assembly length | 1 m |
| Uses | Connecting PROFINET devices via RJ45 ports |
| Connector on side A | RJ45 |
| Connector on side B | RJ45 |
| Design | A ready-made cable with connectors fitted |
| Cable colour | Green |
| Sales unit | Piece |
Selection by application
| Cable installation | Depending on the specific route and mechanical stress |
|---|---|
| Continuous movement and torsion | Must be confirmed for the exact cable assembly |
| PoE power supply | Must be confirmed for the exact cable assembly and devices |
| Water resistance | Verify for the complete cable assembly and connection |
| Contents of the delivery | 1 cable of the selected length, with RJ45 connectors at both ends |
Compatibility and installation
There is an RJ45 connector at both ends. Before ordering, check the available space around the ports, the space required to secure the connector, and the device’s cabling requirements. The RJ45 connector itself does not guarantee a specific data transfer rate, PoE power supply or suitability for wet environments.
Route the cable in accordance with the specified bending radius and clearance from power lines. Ensure strain relief, proper shielding contact and protection against damage. After installation, check the wiring connections and the quality of the completed transmission route.
Use and delivery
The flexible design makes routing easier. For continuous movement in a drag chain, torsion or a robotic application, the exact complete assembly, bend radius and operating conditions must be confirmed. Send the travel length, speed, temperature and required number of cycles.
This item refers to 1 ready-made cable, 1 m in length. Enter the number of cables in the ‘Quantity’ field. We also offer lengths of 0.5 m, 1 m, 2 m, 3 m, 5 m, 7 m and 10 m as separate items. We will confirm any other lengths and the minimum order quantity for custom assemblies in our quotation.
Choosing the right model
What length will I get with this code?
Order number AS-PLPE010/69MM refers to a 1-metre cable with an RJ45 connector at both ends. For a different length, please select a separate item or send an enquiry.
Is it ordered by the metre or by the piece?
This item refers to 1 ready-made cable, 1 m in length. Enter the number of cables in the ‘Quantity’ field. We also offer lengths of 0.5 m, 1 m, 2 m, 3 m, 5 m, 7 m and 10 m as separate items. We will confirm any other lengths and the minimum order quantity for custom assemblies in our quotation.
Do the connectors need to be fitted?
No. The cable is supplied with RJ45 connectors at both ends. Check the space around the ports before connection and route the cable without strain on the connectors.
Installation and use
Is it suitable for a drag chain?
The flexible design makes routing easier. For continuous movement in a drag chain, torsion or a robotic application, the exact complete assembly, bend radius and operating conditions must be confirmed. Send the travel length, speed, temperature and required number of cycles.
Can it be connected to any RJ45 port?
There is an RJ45 connector at both ends. Before ordering, check the available space around the ports, the space required to secure the connector, and the device’s cabling requirements. The RJ45 connector itself does not guarantee a specific data transfer rate, PoE power supply or suitability for wet environments.
Can I order a different length?
This item refers to 1 ready-made cable, 1 m in length. Enter the number of cables in the ‘Quantity’ field. We also offer lengths of 0.5 m, 1 m, 2 m, 3 m, 5 m, 7 m and 10 m as separate items. We will confirm any other lengths and the minimum order quantity for custom assemblies in our quotation.
Does this cable automatically enable PROFINET RT or IRT communication?
The cable itself does not activate the communication mode. The decisive factors are the supported functions of the devices, the network topology and the network configuration. Select the specific cable assembly according to the requirements of the entire transmission path.
Operations and technical consultancy
Is it suitable for Gigabit Ethernet or PoE?
These specifications must be confirmed for the specific cable assembly. Neither the RJ45 connector nor the PROFINET marking guarantees this on its own. To verify this, please provide the model numbers of both devices to be connected.
Will replacing the cable sort out all the network outages?
Replacing the cable will help if it is damaged or unsuitable. However, the problem may also be caused by the connectors, shielding, power supply or device settings. In the event of repeated outages, we recommend measuring the cable run and assessing the communication.
What information should I provide to help choose the right configuration?
Please provide the required length, type of equipment, a photograph of the ports, the mounting method and the environmental conditions. If the equipment is subject to movement, please also specify the mechanical stresses involved. We will confirm the appropriate design and delivery date.

The 3 Biggest Killers of the PROFINET Industrial Network
Our engineers perform diagnostics of industrial networks in hundreds of manufacturing companies. They travel across the country to find the causes of failures. We have asked them what problems they have most frequently diagnosed in customers' PROFINET networks recently. What have they told us?
Highlighted items are mandatory.



